Luowice Wireless Security Camera User Manual
After finishing the remote setting, you can disconnect the network cable
from the camera. Now the camera will work in a wireless way with your
local Wi-Fi network. And you can pick any places within your local Wi-Fi
range to install the camera.
Luowice Wireless Security Camera User Manual
Instruction for Operation on Phone APP
2
2.1 Default Interface
The default interface of the APP is as the left image on the above. There
are 8 icons that you can choose from to enter different interface.
1. Edit: Click 'Edit' and you will see a camera list on the pop-out page. If
you want to delete the camera, please click the icon, and click 'Delete'.
Click on the camera name, and then you can modify the name/password
of the camera on the pop-out page.
2. Add Camera: Click 'Add Camera' to add camera to the APP.
3. Click the circled area of '3', you can enter the live view interface.
4. Click the icon , and you can enter the main menu.
5. Click 'Camera', then you can see a list of cameras added on the APP.
6. Click 'Picture', and you can check the snapshots you took while live
watching the camera.
7. Click 'Video', then you can check the video records you took while live
watching the camera via 'Local'; and check the video records stored on
the pre-installed SD card via 'Online'.
8. Click 'About', and you can get the version information of the APP.
1211
Note: 1.Please kindly make sure your local router name and password
without any space and special charters such as ‘~, `, ?, ,, #, $, ), <, *, =, +,
&, “, :, ;, /,etc. Otherwise the ‘WIFI Setting’ will fail. Cause the camera
can’t recognize special charters automatically.
2.If your local Wi-Fi network is not stable, you can keep connecting the
camera with your local router via network cable to gain more stable
signal transmission.
