Luowice R8 User manual

Luowice Wireless Security Camera User ManualLuowice Wireless Security Camera User Manual

When the Video conversation process finish, please click' Done' and you

can view the MP4 video file in the your album or file manager under the

Convert folder. 2.3.4 Action with Alarm

2.3.4 Action with Alarm

1.1 Operation Environment

Instruction for Operation on PC Client

1

Hardware environment:

a)Pentium IV series, CPU basic frequency not smaller than 2.0G;

b)Memory not smaller than 2G;

c)Hard disk not smaller than 120G;

d)Display resolution not smaller than 1024 x 768.

Software environment:

Windows2000/Windows XP/Windows2003/Windows

Vista/Windows7/Windows8/Windows10

1.2 Default Setting of PC Client

The address to download PC Client for the camera:

http://www.luowice.com/en/R8-download.html

Please download the PC Client (HiP2P Client) and install it on your PC.

The default User Name of the PC Client: admin (cannot be modified).

Password: None (means leaving it blank).

2.3.4 Action with Alarm

1.3 PC Client Interface Instruction

When the PC Client has been installed in your PC

successfully, its icon will appear on the desktop as

follows:

0145

R8

PC Client User Manual

Luowice

Luowice Wireless Security Camera User ManualLuowice Wireless Security Camera User Manual

2.3.4 Action with Alarm

Double click the icon, and the default interface is as follows:

Click any button on the middle of the top and the Log In page will pop out.

The log in interface is as follows:

Default user name: admin and cannot

be modified.

Password: No password, just leave it

blank and click 'OK' to log in.

Note: Please note that only the users

with admin permissions can exit the PC

client. Common user and guest cannot

exit the PC client.

2.3.4 Action with Alarm

2.1 The Config Interface

PC Client Operation Instruction

2

There are five sub categories on the config interface: Device Management,

Parameter settings, Record Management, User Management, and Other

Settings.

2.3.4 Action with Alarm

2.2 Device Management

The device management interface can be divided into four zones.

Zone 1: Two methods to add cameras to the PC Client.

Zone 2: Online device list.

Zone 3: Classify cameras into different regions, such as garden, garage,

etc.

Zone 4: Region list.

0302

Luowice

Luowice Wireless Security Camera User ManualLuowice Wireless Security Camera User Manual

2.3.4 Action with Alarm

2.2.1 Methods to add Cameras to the PC Client

Function: Add cameras to the PC Client.

There are two ways to add cameras to the PC Client.

Method A—Add cameras via inputting UID

Operation: Please click the Config button and log in the PC Client. Then

click the 'Input UID' icon. And input the relevant information on the pop-

out page. And then click 'OK'.

Note:

a)UID: You can find it from the label on the side of the camera or from the

phone APP after you paring the camera to your phone.

b)Name: The name you set up for the camera. Default is: Camera. It can

be modified.

a)User Name: Default is: Admin and cannot be modified.

b)Password: Default is: Admin and can be modified. Please keep the

modified password within 15 letters and avoid using special characters

such as %, #.

c)Area: Default is 'Region' and cannot be modified.

0504

Luowice

Luowice Wireless Security Camera User ManualLuowice Wireless Security Camera User Manual

Then click the 'Preview' icon. And the camera will indicate as 'Offline'.

Then take the mouse cursor to the 'Camera' icon the top left side under the

'Region' list and right click the mouse. Then click 'Connected Device' on

the pop-out page. When the camera's status indicates as 'Online', double

click the 'Camera' icon and the camera will show live view on the screen.

Then check the camera under the 'Region' list. And click the 'Modify

Device' icon. Input the name and password of the camera, and then click

'OK' on the pop-out page. Then click the 'Preview' icon and get the live

view on the screen as Method A indicated above.

Method B—Add cameras via searching LAN device

Operation: Please click the 'Config' icon, and then click 'Search'. When

the camera appears on the left box, check the camera, and then click

'Add'. And the camera will appear under the 'Region' list on the right box.

0706

Luowice

Luowice Wireless Security Camera User ManualLuowice Wireless Security Camera User Manual

2.3.4 Action with Alarm

2.2.2 Delete Device

Function: Delete cameras from the PC Client.

Operation: Click the 'Preview' icon, and then take the mouse cursor to

'Camera' and right click the mouse. And click 'Disconnect Device' on the

pop-out page. Wait for seconds and the camera's live view will disappear

from the screen.

Then click the 'Config' icon and check the camera you want to delete

from the 'Region' list on the top right side. Then click 'Delete Device' and

click 'OK' on the pop-out page and the camera will be deleted

successfully.

2.3.4 Action with Alarm

2.2.3 Classify Cameras into Regions

To classify cameras into regions, please set up regions first. And then

add the cameras to the region you want to classify to when adding

cameras to the PC Client.

0908

Luowice

Luowice Wireless Security Camera User ManualLuowice Wireless Security Camera User Manual

Operation:Please click the 'Config' icon, then click 'Add Area', and set up

area based on your need, and then click 'OK' and the area name will show

under the 'Region' list on the top right side. Now you can add cameras to

the region you set.

2.3.4 Action with Alarm

2.3 Parameter Settings

There are five sub categories in the parameter settings interface: Video,

Image, Audio, Alarm Setting, Network, SD Card, Timed capture, PTZ,

Login Info, System, Wi-Fi.

2.3.4 Action with Alarm

2.3.1 Video

Function: modify the video settings.

Operation: the device will obtain the appropriate settings automatically

based on your network condition. We suggest not to modify the settings

manually.

Note: When the internet speed is too slow, you can choose a smaller

'Resolution', change the 'Stream Type' to 'Sub Stream', choose a smaller

'Bit rate, a smaller 'Frame Rate', and a larger 'Image quality'.

2.3.4 Action with Alarm

2.3.2 Image

Function: modify the image settings.

Operation: the device will obtain the appropriate settings automatically

based on your network condition. We suggest not to modify the settings

manually.

11

10

Luowice

Luowice Wireless Security Camera User ManualLuowice Wireless Security Camera User Manual

Note: please note that if you change the 'IR LED Control' to 'On' all day

long, the image quality in day time will be affected. And if you change

the 'IR LED Control' to 'Off' all day long, the camera will have no night

vision, which means the camera view will be completely dark without

showing images.

2.3.4 Action with Alarm

2.3.3 Audio

Function: modify the audio settings.

Operation: the device will obtain the appropriate settings automatically

based on your network condition. We suggest not to modify the settings

manually.

2.3.4 Action with Alarm

2.3.4 Alarm Setting

Function: Modify the settings of alarm.

Operation: The operation is similar to those via phone APP. Please refer

to the instruction of phone APP above.

Note:

a)Sound Alarm: Only applicable to devices that support sound alarm

function.

b)External Alarm: Only applicable to devices that support external

alarm function.

1312

Luowice

Luowice Wireless Security Camera User ManualLuowice Wireless Security Camera User Manual

2.3.4 Action with Alarm

2.3.5 Network

Function: Modify the audio settings.

Operation: The device will obtain the appropriate settings automatically

based on your network condition. We suggest not to modify the settings

manually.

Note:

a)You can modify the IP Address to make it be compatible with specific

router only.

b)When the camera cannot be connected with your router, please check

whether the 'Subnet mask', 'Gateway', 'Primary DNS' and Http Port' is in

compatible with your router.

c)The default 'Http Port' is: 80. If you have modified the 'Http Port', for

example, 81, then you have to add ':81' behind the IP address

(192.168.7.39:81) when you want to view the camera via browser.

d)If you want to add the camera to your NVR/DVR, please input the 'IP

Address' and 'Server Port' of the device to the NVR's/DVR's

corresponding interface.

2.3.4 Action with Alarm

2.3.6 SD Card

Function: Modify the audio settings.

Operation: The device will obtain the appropriate settings

automatically based on your network condition. We suggest not to

modify the settings manually.

Note:

a)The default setting of record length is 600 seconds per video record.

You can modify the length from 15-600 seconds per record.

b)To format the SD card, please click 'Format SD' and the SD card will

be formatted. Please backup important files before formatting the SD

card.

c)The default setting is recording for 24 hours every day. To modify the

recording schedule, please take the mouse cursor to the hour bar, for

example, SUN '1', then press the mouse and move the mouse slightly.

Loosen the mouse and then the area of SUN '1' will turn into white color

and there will be no video recording during 1:00am-2:00am on Sunday.

If you want to set up record for SUN '1' again, please take the mouse

1514

Luowice

Luowice Wireless Security Camera User ManualLuowice Wireless Security Camera User Manual

cursor to SUN '1'. Then press the mouse and move it slightly. Loosen the

mouse and the area of SUN '1' will turn into green color and there will be

video record during 1:00am-2:00am on Sunday then.

2.3.4 Action with Alarm

2.3.7 Timed Capture

Function: To modify the storage location of the snapshots you take when

live view the camera on the PC Client.

Operation:The default setting of 'Time capture' is that the picture will be

saved in your PC. You can check 'Save Picture on the SD Card' or/and

'Save Picture on the FTP Server' to save the snapshot in the SD card/FTP

server as well.

2.3.4 Action with Alarm

2.3.8 PTZ

Function: Modify the PTZ settings.

Operation: The device will obtain the appropriate settings

automatically based on your network condition. We suggest not to

modify the settings manually.

2.3.4 Action with Alarm

2.3.9 Login Info

Function: Modify the password.

Operation: Please kindly input the old password and set up new password.

Please keep the password the same in both 'New Password' and 'Check

Password'. And keep the password within 15 letters while avoid using

special characters such as #, %.

1716

Luowice

Luowice Wireless Security Camera User ManualLuowice Wireless Security Camera User Manual

2.3.4 Action with Alarm

2.3.10 System

Function: Check the system settings or reboot the settings back to factory

settings.

Note: Please note that you can reboot the device via clicking 'Reboot' or

'Restore'. There is no difference.

2.3.4 Action with Alarm

2.3.11 Wi-Fi

Function: Modify the Wi-Fi settings of the camera.

2.3.4 Action with Alarm

2.4 Record Management

Function: Modify the local record settings.

Operation: Please check 'Enable the plan of record' to activate local

recording function. And then you can set up the recording schedule

according to your need. Please refer to 3.4.1.2.6 SD Card about how to

set up the schedule. And then choose a Disk of your PC to store the

record.

Note:

a)The default 'General Record Length' is 5 Min. It can be modified from

1-30 Min.

b)You can choose to leave a specific storage space in the disk for the PC

that the camera cannot use. You can modify the leaving space from 1-50

GB.

c)The default record format is: 264. When you find the recorded videos

cannot be played via the player, please change it to AVI format.

d)Please choose the larger capacity disk to save and make sure the 'disk

begins recovery control' is smaller than the available size of the disk.

1918

Luowice

Luowice Wireless Security Camera User ManualLuowice Wireless Security Camera User Manual

2.3.4 Action with Alarm

2.5 User Management

Function: Modify users of the PC Client

Operation: The default user of the PC Client is: admin. You can

add/delete other users.

2.3.4 Action with Alarm

2.6 Other Settings

Function: Modify other settings.

Operation: The device will obtain the appropriate settings automatically

based on your network condition. We suggest not to modify the settings

manually.

2120

Luowice

2.3.4 Action with Alarm

2.7 The Preview Interface (Monitor PTZ Function and Preset Function)

Function: Modify the live view of the cameras.

2.3.4 Action with Alarm

2.7.1 List

Region: Shows the cameras classifications.

Current Screen: Shows the cameras with live views on the PC Client at

the moment.

Luowice Wireless Security Camera User ManualLuowice Wireless Security Camera User Manual

2.3.4 Action with Alarm

2.7.2 PTZ

To control PTZ directions, please kindly click the any of the eight

direction icons.

Iris enlarge button. Only applicable for cameras with lens

supporting this function.

Iris shrink button. Only applicable for cameras with lens

supporting this function.

Zoom in button. Only applicable for cameras with lens

supporting this function.

Zoom out button. Only applicable for cameras with lens

supporting this function.

Focus out button. Only applicable for cameras with lens

supporting this function.

Focus out button. Only applicable for cameras with lens

supporting this function

2322

Luowice

Luowice Wireless Security Camera User ManualLuowice Wireless Security Camera User Manual

2.3.4 Action with Alarm

2.7.3 PRESET

Function: To set up preset points. Then the camera view can be move from

one point to another point precisely via a click.

Operation:

First, please click the live view of the camera you want to set up preset

function. Then click 'PTZ' to open the PTZ interface. Apply the PTZ

function to move the camera view to a point you want to set up as a

specific position, such as the door.

Then click 'Preset002' and then click 'Set'. And the chosen position will

be set up as position 1 successfully.

2.3.4 Action with Alarm

2.7.4 COLOR

Function: Adjust the color of the live view image.

Operation: Please kindly click 'COLOR' and adjust the settings according

to your need.

2.3.4 Action with Alarm

2.7.5 Real-Time Live View

Electronic zoom: Click it and then move the mouse cursor to the live

view interface. And then keep left pressing the mouse to draw a specific

area you want to see details. Loosen the mouse and the selected area will

be enlarged.

Intercom: Choose the live view camera you want to apply

intercom.Then click the intercom icon. And when this icon appears

on the live view interface, intercomis applicable. Please kindly note that

only one camera applies intercom each time. This function only is only

applicable to devices that support intercom function.

Voice monitor: Click it to enableaudio monitoring. And when thisicon

Now go back to the PTZ interface and choose positions to set up as

position 3, position 4, … And set up preset positions.

When you want to move the view from a preset position to another preset

position, for example, from position 2 to position 3, just simply click on

'Preset003', and then click on 'Go to', then the view will move to position

3 precisely.

If you want to delete a preset position, for example, 'Preset002', please

click 'Preset002', and then click 'Delete'. And the preset position will be

deleted successfully.

Note: Please do not set any position as preset position 1. Because when

changing position between preset position 1 and other preset positions, it

will not adjust zoom automatically. Just leave preset position 1 blank.

2524

Luowice

Luowice Wireless Security Camera User Manual

appears, audio monitoring is applicable. Click the voice monitor

button again and the audio monitoring function will be deactivated.

Record: Choose the live view camera you want to enable local

recording function, and then click the recording button to apply recording.

When this icon appears on the top right side, video recording starts and it

will be stored in the PC. Click the record button to stop recording.

Photo: Choose the live view camera you want to take snapshot. Then

click the photo button to take snapshots.

Select Pic:There are 6 screen display modes (1/4/6/8/9/16)for you to

choose from.

Full Screen: Click it and then the live view interface will cover the \

entire screen

Alarm message list shrink/extend: click it to display or hide the

alarm message list.

2.3.4 Action with Alarm

2.7.6 Alarm Info

Function: There will be alarm info at the bottom of the interface which

shows the status of the cameras, such as connect success, password error,

etc.

2.3.4 Action with Alarm

2.8 The Automatically add devices interface

Function: To add those cameras in the same LAN with the PC via a simple

click.

Note: When the cameras have modified the password, the 'Automatically

add devices' function is not applicable.

2.9 Back Videos to the Computer and Change Format of the Videos

Function: To playback the local video records stored in the PC's disk.

Operation: Please click the 'Local Playback' icon. And then choose the

camera you want to playback from the region list. And choose the date

you want to playback. Then the local video records will show record bar

in green color on the schedule form at the bottom. Click the green record

bar and it will start playback automatically. Click the 'Normal' icon and

you can choose the playback speed from 1/8 to 8X.

2726

Luowice

Luowice Wireless Security Camera User ManualLuowice Wireless Security Camera User Manual

Function: To playback the video records stored in the SD card.

Operation: Please click the 'Remote Playback' icon. And choose the

record type, select the channel, date, start time/end time. And then click

'Search' and the record list will show on the left side. Double click the

time you want to playback and the recorded video will start playback.

Note: the playback speed is fixed and cannot be modified. You can drag

the blue bar at the bottom right side to choose a specific time to start video

playback.

2.10 The Remote Playback Interface (Playback Videos Recorded on the SD Card) 2.3.4 Action with Alarm

2.3.4 Action with Alarm

2.11 Backup Videos to the Computer and Change Format of the Videos

Operation: Please click the 'Remote Playback' icon on the top and the

interface shows as below. Select the channel, date and so on the left side

and click 'Search'.

Then the video files will show on the left side as below. And then move

the mouse to any file you want to back up and right click the mouse. Then

click 'Download file' and the Download Interface will pop out.

2928

Luowice

Luowice Wireless Security Camera User ManualLuowice Wireless Security Camera User Manual

Please remember the Save path of the videos to get it later. Then click

'Begin' and the video will be backup successfully.

Note:

1. To watch the videos you have downloaded, you will need to download

the specific player from our official website to play the videos, for the

videos cannot be played on any other players.

2. To change the video file into another format, please download the

Video Conversion software from our official website. Then you can

change the format of the videos to watch it via other players.

Download URL for All the Related Materials of Luowice Wi-Fi Security

Camera:

http://www.luowice.com/en/R8-download.html

2.3.4 Action with Alarm

2.12 The Logs Interface

Function:To check main operation of the camera.

Operation: Please click the 'Logs' icon. And then choose the log type,

device, start time/end time, and click 'Search' to get the logs list.

3130

Luowice

Luowice Wireless Security Camera User Manual

2.3.4 Action with Alarm

2.13 The Logout user Interface

Function:To log out the current user and log in with another user.

2.3.4 Action with Alarm

2.14 The Exit Interface

Function: To exit the PC Client.

32

Manufacturer: Guangzhou Lieju Electronic Technology Co., Ltd.

Website: http://www.luowice.com/en

Email: [email protected]

Skype: Luowice Tech Support

Address: Dongfeng Industry Park, Lingshan East Road, No.15,

Zhucun, Tianhe District, Guangzhou, China, 510665

Luowice

Luowice R8 User manual

Popular Software manuals by other brands