Luraco IMD PRO-30K User manual

Product Manual
LURACO PRO-30K ELECTRIC PORTABLE DRILL
(LPRO30)

Professional IMD Pro-30k drill for dental workplaces and nail salons by Luraco technologies
corporation, one of the main electronics machine manufacturers, has efficaciously evolved a new
model of professional drill (Pro-30k) to deliver all components of novel technology, overall
performance, and reliability into one resourceful and complete piece of device; certainly the nice
drill for Specialists available on the market today. Luraco Pro-30K has the fastest speed up to 30,000
RPM, a powerful motor and it is extremely durable.
HAND PIECE
02
OVERVIEW
nDesigned for Dental, Pedicure, Manicure Professional Use
n Durable and long lasting micro motor
nHigh Torque
nUp to 30,000RPM
nLight weight and compact design
nNo vibration and low noise
nDurable aluminium and stainless steel body
CONTROL BOX
n Cordless and Rechargeable
nVariable speed control
n Powerful Lithium-Ion battery
nUp to 10 hours battery life
n Smart overload protection
nBuilt-in cradle
nUniversal voltage (110V/60Hz to 240V/50Hz)
n Innovative design for dental, pedicure, and nail cropping professional use
n High torque and clean operation up to 30,000 rpm
n Colet chuck type
n Aluminum and chrome steel go with the flow frame.
n Low vibration and occasional noise
n Lengthy lifestyles rechargeable lithium ion battery
n Light weight and portable
n Seamless transition among wall and battery strength ahead and reverse manipulate with variable
speeds up to ten hours of battery lifestyles
n Smart overload protection
Rotation
Head
Handle Body Cord
FEATURES

03
CHANGING THE DRILL BIT
1) Open the hand-piece chuck by turning the handle counter-clockwise.
2) Change the drill bit.
3) Lock the hand-piece chuck by turning the handle clockwise.
nAlways lock the hand-piece chuck before using to avoid productmalfunction.
nCheck the new bit for any damage before replacing.
BATTERY MANAGEMENT SYSTEM
Luraco IMD Pro-30 Khasa non board battery monitoring system that will monitor the Lithium-Ion
battery while the drill is in operation. In the event that the battery is completely depleted, simply plug
the power cord into the power connector on the control unit and you can continue with your work. It
will charge automatically while you are using it.
Battery Indicator Status
Solid Red Light
Blinking Red
Green Light
The battery is critically low and should be recharged immediately
The battery is running low and will only provide about 1 more hour of use
The battery is in the optimal range
Issues Troubleshooting Diagnosis/Solution
TROUBLESHOOTING GUIDE
Drill does not work
No charging blue light when
on base
Battery low warning comes
too often
Plug in the charger
Verify that the charger is
plugged in
Let the unit charge overnight
Working now: Battery was depleted
Not Working: Check the hand-piece
Still not working: Call Luraco
Customer Service
The battery is approaching its end of
life,call Luraco Customer Service to
purchase a replacement battery

04
PRECAUTIONS
While the usage of electrical gadget, fundamental protection precautions should continually be
observed to reduce the risk of fire, electric surprise or harm.
nMaintain electricity wire and controller away from moist or heated surfaces.
n This device must no longer be used by kids. Examine and follow all instructions before the usage
of the gadget.
nLock the chuck earlier than the usage of the hand-piece to keep away from product malfunction.
nDo now not touch the hand-piece connector with wet hands.
nMake certain the hand-piece has absolutely stopped earlier than setting it down.
nAlways turn off and unplug power to the system earlier than servicing. Cleansing and protection
ought to now not be completed via children.
nDo no longer insert any item into any openings and avoid losing the system. In case the hand- piece
is dropped, take a look at to make certain the bit is not bent and the unit does no longer overheat.
nNever function this gadget with a broken wire or plug. If it isn't always operating well, if it's far
dropped or broken, or dropped into water, go back the system to a service center for examination
and restore.
nWear right shielding clothes and gadget, including a dirt mask and protection goggles. Keep the
place of job clean.
nDo no longer disassemble or adjust the unit without authorization from Luraco technologies.
Warranty may be voided if adjustments are made without authorization.
nHold the region around hand-piece smooth from dust and grindings.
nTake away dust available-piece, wiping with isopropyl alcohol and avoid beverages from
penetrating into internal components.
nDo no longer apply oil to the product or clean with water. The grease in the bearing may want to
soften because of oil.
n Air cleansing is acceptable but air pressure may additionally affect the hand-piece or motor.
SPECIFICATIONS
LURACO PRO-30K ELECTRIC PORTABLE DRILL
Bit size
Controller
Hand Piece
Universal voltage
12.67 cm * 7.30 cm * 2.56 cm
58 cm
Φ2.35 mm
110V/60Hz to 240V/50HzUniversal