luxx box Harlie Table User manual

Harlie Table
Assembly Instructions
Carefully unpack your Harlie Table, ensuring that the full parts list depicted below has been included.
Place the table top with engraved side down on a padded surface.
1.
luxxbox pty ltd acn 123193788 1/66 McLachlan St Fortitude Valley QLD 4006 Australia p [phone] f [phone]
copyright 2011, luxxbox pty ltd reserves the right to change content and product specifications without notice, do not copy without permission Harlie Table Instructions 1.2 12/2011
www.luxxbox.com
3 x
3 x
3 x 1 x
Thread one of the supplied hex socket grub screws into each of
the 3 tapped holes in the table top, and gently tighten with the
allen key provided. DO NOT OVER TIGHTEN
2.

Lower the Harlie base onto the table top, taking
care to align the holes in the base with the
protruding grub screws.
3.
Reach into the access hole in the underside of the
base, first placing a washer, then threading a wing
nut on each grub screw. Rotate the wing nuts until
snug. DO NOT OVER TIGHTEN
4.
Turn your Harlie Table right side up and enjoy!5.
luxxbox pty ltd acn 123193788 1/66 McLachlan St Fortitude Valley QLD 4006 Australia p [phone] f [phone]
copyright 2011, luxxbox pty ltd reserves the right to change content and product specifications without notice, do not copy without permission Harlie Table Instructions 1.2 12/2011
www.luxxbox.com