Luxxout SOLEM User manual

®
SOLEM PATIO SCREEN USER MANUAL
Dear client,
You have just acquired a quality product from LuxxOut. Please accept our congratulations on your purchase. All the materials we use
are of the highest quality and adapted to the intended use. As producer, we guarantee all faults which can arise under normal usage
and maintenance for a period of two years. Because LuxxOut is committed to the quality of our products and the greatest possible
satisfaction of our clients, we have designed specic operation and maintenance instructions.
OPERATING THE SOLEM
• Put the rod provided in the designated hook. Then pull or push the awning rib in the desired direction.
• Pull the Solem out in a smooth movement in order to spread the fabric as nicely as possible. If too much fabric is left, you can
adjust this. See the assembly manual for this.
• There is a recess at the end of the guide. The rst rib drops into this to lock the system. When you want to slide the Solem back,
make sure you raise the rib slightly so it can slide out of the brake easily.
SAFETY
• Only use the product for the functions for which it was designed.
• Never put your hand between moving parts or between the sections. Teach children to never put their ngers between sections,
moving and/or hinged parts, etcetera.
• Never stand on the system.
• This product is not a toy. It has not been developed to climb on or to hang from.
• Never attach extra elements or accessories to this product, except for the accessories developed specically for this product.
MAINTENANCE
The system requires little maintenance, but in order to enjoy your system for many years, we recommend the following:
• Never use caustic or aggressive products, scouring pads or other abrasive agents.
• Clean the system regularly (± once yearly).
• If parts need replacing, only use original parts from the manufacturer.
• Before cleaning, rst remove loose dirt with a brush or vacuum cleaner. You can then use a cleaning product and lukewarm water
to remove the remaining dirt. After cleaning, rinse the system.
• Anodised or enamelled sections which are dirty can be cleaned with lukewarm water and a mild cleaning agent.
• Regularly check your product for dirt, sticks, leaves, etc, and remove them.
COMMENT
• In view of the production process, there can be minor colour variations between colour swatches and the sections of the Solem.
• Minor colour differences can occur between components and sections.

WARRANTY
All the materials used by LuxxOut are of the highest quality and adapted to the intended use. As manufacturer, LuxxOut guarantees a
warranty of two years for all faults which can occur under normal use and regular maintenance.
The warranty covers the supply of replacement parts, to be tted on-site by the installer (if necessary, assisted by a technician from
LuxxOut) or an overhaul of the system by the manufacturer in the manufacturer’s own workplace.
The warranty period starts on the date of delivery and applies exclusively to the actual product and not to its installation.
The warranty applies only if the product is used and maintained in accordance with the instructions in this manual.
The warranty does not imply any right to compensation or payment for consequential damage and does not cover personal injuries.
THE WARRANTY LAPSES IF
• The materials have been exposed intensively to harmful atmospheric conditions.
• The materials have been exposed to an aggressive industrial or commercial environment and have consequently undergone
discolouring or damage.
• The materials have been placed in an environment with a high salt content in the air, due to which corrosion has occurred.
• The products have not been placed in accordance with the supplier’s installation instructions.
• It concerns materials which are subject to wear and tear as a result of frequent or prolonged use.
• The system has not been secured properly.
• The technical limits of use of the product have been exceeded.
• Use above wind force 4.
• Parts have been used which are not original nor have been recognised by our technical department.
• Incorrect or forced use.
• Repairs or changes by unauthorised third parties have been made.
• Damage has occurred due to third parties, such as transport damage.
• Damage has occurred due to abnormal weather conditions (storm, hail, water and re damage, etc).
• There are unavoidable aesthetic deviations which arise from the production process or are inherent to the product.
®
SOLEM PATIO SCREEN WARRANTY CONDITIONS