LyxPro VRI50 VOCAL BOOTH User manual

VRI50
VOCAL
BOOTH
User Guide
SKU: LYXVRI50
Hello!
Thank you for purchasing the LyxPro® Vocal Booth VRI-50. This User Guide is intended to provide you with
guidelines to ensure that operation of this product is safe and does not pose risk to the user. Any use that
does not conform to the guidelines described in this User Guide may void the limited warranty.
Please read all directions before using the product and retain this guide for reference. This product is
intended for household use only. It is not intended for commercial use.
This product is covered by a limited one-year warranty. Coverage is subject to limits and exclusions. See
warranty for details.
CONTENTS:
SAFETY PRECAUTIONS
PACKAGE CONTENTS
PRODUCT OVERVIEW
ABOUT THE LYXPRO® VOCAL BOOTH VRI-50
USING THIS VOCAL BOOTH
TECHNICAL SPECIFICATIONS
WARRANTY INFORMATION
GET IN TOUCH!
Safety Precautions
1. WARNING: CHOKING HAZARD – Small parts. This product contains small parts and is not
suitable for children under 3 years old.
2. Remove all packaging before using this device. Please keep all packaging materials out of reach of
children and pets.
3. Properly dispose of all packing materials immediately after unpacking product, as the bags used for
packaging could present a suocation or choking hazard.
4. Read all instructions carefully before attempting to operate this device. Improper usage could result in
injury or a reduction in ecacy.
1
2
2
2
2
3
3
4
1

2
Package Contents
• Microphone Shield
• Mounting Hardware Set
• User Guide
Product Overview
1. Stationary Panels (3)
2. Folding Panels (2)
3. Stability Feet (3)
4. Position Locks (2)
5. Stand Clamps (2)
6. Clamp Levers (2)
About The LyxPro® Vocal Booth VRI-50
This portable microphone shield allows you to reduce ambient noise to create a“dry” recording in any
environment. The metal and foam panels are easy to position behind your microphone when recording
vocals and other live audio.
Using This Vocal Booth
Initial Setup:
1. Unfold side Folding Panels by turning Position Locks and Stability Feet
counterclockwise.
2. Adjust panels to desired position, then tighten Position Locks and Stability Feet
by turning back in a clockwise direction.
3. Set the Vocal Booth securely on a at, stable surface.
Mounting on Microphone Stand:
1. Loosen Clamp Levers by turning counterclockwise.
2. If necessary, you may use a hex key (not included) to loosen
Stand Clamp screws.
3. Slide the microphone stand through Stand Clamps .
4. Tighten Clamp Levers by turning back in a
clockwise direction.
Mounting a Microphone:
You will require the included Mounting Hardware Set for
this operation. The set consists of:
A. Support Pole
B. Support Bar
C. Washers (2)
1
3
2
4
6
5
environment. The metal and foam panels are easy to position behind your microphone when recording
1. Unfold side Folding Panels by turning Position Locks
and Stability Feet
2. Adjust panels to desired position, then tighten Position Locks
and Stability Feet
by turning counterclockwise.
2. If necessary, you may use a hex key (not included) to loosen
3. Slide the microphone stand through Stand Clamps .
You will require the included Mounting Hardware Set for
2
6
4
B
C
A
AB
4
5
5
6
3
3

To mount the microphone:
1. Remove middle Stability Foot by turning counterclockwise.
2. Place threaded end of Stability Foot through round hole in Support Bar .
3. Replace Stability Foot , which should now have Support Bar in position.
4. Tighten Stability Foot by turning back in a clockwise direction.
5. Unscrew knob on the bottom of Support Pole by turning counterclockwise.
6. Remove one of the Washers , leave the other one on the Support Pole .
7. Place threaded end of Support Pole through the long opening on the Support Bar .
8. Replace the washer you had removed in Step 6 and the bottom knob of Support Pole by turning
back in a clockwise direction, but DO NOT TIGHTEN.
9. Mount microphone to the top of the Support Bar , and then proceed to tighten the Support Pole
in place.
Technical Specications
• Dimensions: 16.9” x 15” x 12.8”
• Weight: 6.2 lbs.
• Mounting Hardware:
º Max Length – 5.9”
º Motion Range – 4.5”
º Supporting Height – 4.1”
Warranty Information
LIMITED WARRANTY ON LYXPRO® VOCAL BOOTH VRI-50
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS,
WHICH VARY FROM STATE TO STATE.
WE WARRANT THAT DURING THE WARRANTY PERIOD, THE PRODUCT WILL BE FREE FROM DEFECTS IN
MATERIALS AND WORKMANSHIP.
LIMITATION OF LIABILITY
TO THE EXTENT NOT PROHIBITED BY LAW, THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER
WARRANTIES, ORAL, WRITTEN, STATUTORY, EXPRESS OR IMPLIED. EXCEPT FOR THE EXPRESS WARRANTIES
CONTAINED IN THIS LIMITED WARRANTY STATEMENT AND TO THE EXTENT NOT PROHIBITED BY LAW, WE
DISCLAIM ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, STATUTORY OR OTHERWISE, INCLUDING
WITHOUT LIMITATION, THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
SOME STATES DO NOT ALLOW DISCLAIMERS OF IMPLIED WARRANTIES, SO THIS DISCLAIMER MAY NOT APPLY
TO YOU. TO THE EXTENT SUCH WARRANTIES CANNOT BE DISCLAIMED UNDER THE LAWS OF YOUR
JURISDICTION, WE LIMIT THE DURATION AND REMEDIES OF SUCH WARRANTIES TO THE DURATION OF THIS
EXPRESS LIMITED WARRANTY.
OUR RESPONSIBILITY FOR DEFECTIVE GOODS IS LIMITED TO REPAIR, REPLACEMENT OR REFUND AS
DESCRIBED BELOW IN THIS WARRANTY STATEMENT.
3
3
B
B
BB
B
B
CB
B
3
3
3

Get in Touch!
[email protected]
1-866-849-3049
www.lyxpro.com
Distributed by
C&A Marketing, Inc.
114 Tived Lane East, Edison NJ 08837.
All other products, brand names, company names,
and logos are trademarks of their respective owners,
used merely to identify their respective products,
and are not meant to connote any sponsorship,
endorsement or approval.
MADE IN CHINA
LyxPro is a trademark of C&A IP Holdings,
LLC in the US, Canada, China and the EU
©2019. C&A IP Holdings, LLC. All Rights Reserved
WHO MAY USE THIS WARRANTY? C&A Marketing, Inc. located at 114 Tived Lane East, Edison, NJ (“we”)
extend this limited warranty only to the consumer who originally purchased the product (“you”). It does not
extend to any subsequent owner or other transferee of the product.
WHAT DOES THIS WARRANTY COVER? This limited warranty covers defects in materials and workmanship
of the LyxPro® Vocal Booth VRI-50 (the “product”) for the Warranty Period as dened below.
WHAT DOES THIS WARRANTY NOT COVER? This limited warranty does not cover any damage due to: (a)
transportation; (b) storage; (c) improper use; (d) failure to follow the product instructions or to perform any
preventive maintenance; (e) modications; (f ) unauthorized repair; (g) normal wear and tear; or (h) external
causes such as accidents, abuse, or other actions or events beyond our reasonable control.
WHAT IS THE PERIOD OF COVERAGE? This limited warranty starts on the date of your purchase and lasts for
one year (the “Warranty Period”). The Warranty Period is not extended if we repair or replace the product.
We may change the availability of this limited warranty at our discretion, but any changes will not be
retroactive.
WHAT ARE YOUR REMEDIES UNDER THIS WARRANTY? With respect to any defective product during the
Warranty Period, we will, at our sole discretion, either: (a) repair or replace such product (or the defective
part) free of charge or (b) refund the purchase price of such product if an exchange unit cannot be provided.
HOW DO YOU OBTAIN WARRANTY SERVICE? To obtain warranty service, you must contact us at
1-866-849-3049 or by email at [e-mail] during the Warranty Period to obtain a Defective Merchandise
Authorization (“DMA”) number. No warranty service will be provided without a DMA number and return
shipping costs to our facilities shall be assumed by you, the purchaser. Shipping costs of the replacement
unit to you shall be assumed by us.
4