429.957UK User Manual
Controls and Functions
•Insert the LED night light into a powered wall
socket.
•Turn the switch to the ‘white’ position for the
always on feature.
•Turn the switch to the ‘off’ position to switch the
unit off.
•Turn the switch to the ‘colour change’ position for
the constant colour changing mode.
•For automatic mode select either ‘white auto’ or
‘colour change auto’. This means that the unit will
now only operate the selected colour during the
hours of darkness.
•During either colour change mode it is also possible to select the
displayed colour by pressing the colour mode button on the other side of
the unit. This selected colour will now be remembered and the unit will
light up again in the same colour on the next operation.
Warnings
1. For reasons of electrical safety the device must never be cleaned with
water or other liquids or immersed in water.
2. Only a dry, lint-free cloth should be used for cleaning.
3. Please do not use this device if you find that it is damaged in any way.
4. Do not subject the device to any extreme temperatures or severe
mechanical stress as this may result in deformation of the product.
5. Remove the product from the socket when not in use.
6. Never cover the LED night light when it is in operation.
7. Do not attempt to repair the unit or take apart under any
circumstances,as this will invalidate your warranty.
This product is classed as Electrical or Electronic equipment and should not be disposed with
other household or commercial waste at the end of its useful life. The goods must be
disposed of according to your local council guidelines.
Errors and omissions excepted.
Copyright© 2016. AVSL Group Ltd.
