M2I UDJET MSR-B2MWA User manual

Industrial Remote I/O Coupler Module Hardware Manual
M2I Corporation
11-35, Simin-daero 327beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do, 14055，Republic of Korea
2 / 17
Thank you for purchasing the industrial Barcode reader of M2I corporation.
Please read this manual carefully to know installing, operating this equipment for safe use of this product.
M2I Corporation
Industrial Barcode Reader
MSR-B2MWA, MSR-B2MWA-DONGLE
Hardware Manual

Index
Chapter 1. Safety Precautions................................................................................................................................................................ 4
Before using the product............................................................................................................................................ 4
General Precautions....................................................................................................................................................... 4
Installation Precautions................................................................................................................................................ 4
Disposal Precautions ..................................................................................................................................................... 5
Chapter 2. Overview................................................................................................................................................................................... 5
2.1 Product Introduction...................................................................................................................................................... 5
2.2 Package Contents............................................................................................................................................................ 5
Chapter 3. General Specifications ........................................................................................................................................................ 6
3.1 Power Specifications ...................................................................................................................................................... 6
3.2 Display and Memory Specifications........................................................................................................................ 6
3.3 functional Specifications............................................................................................................................................... 6
3.4 Antenna information...................................................................................................................................................... 6
3.5 Environment Specifications......................................................................................................................................... 6
3.6 Structure Specifications ................................................................................................................................................ 7
Chapter 4. Part Names and General Specifications..................................................................................................................... 7
4.1 MSR-B2MWA and MSR-B2MWA-DONGLE ......................................................................................................... 7
4.2 Part Names and Specifications ................................................................................................................................. 8
Chapter 5. Interface .................................................................................................................................................................................... 9
5.1 USB......................................................................................................................................................................................... 9
5.2 RF Wireless Communication....................................................................................................................................... 9
5.3 IrDA ........................................................................................................................................................................................ 9
Chapter 6. Installation .............................................................................................................................................................................10
6.1 Specifying Install Location.........................................................................................................................................10
6.2 Battery Charging ............................................................................................................................................................10
6.3 Dongle Installation........................................................................................................................................................10
6.4 Infrared Communication (IrDA)...............................................................................................................................10
Chapter 7. Device operating and settings. ....................................................................................................................................11
7.1 Base screen.......................................................................................................................................................................11
7.2 Learn the basics .............................................................................................................................................................12
Chapter 8. Maintenance .........................................................................................................................................................................16
8.1 Cleaning the Display and key pad ........................................................................................................................16
8.2 Periodic inspection........................................................................................................................................................16
8.3 When a problem occurs with your device ........................................................................................................16
8.4 Self Diagnosis..................................................................................................................................................................16
Chapter 9. Products Label .....................................................................................................................................................................17
9.1. MSR-B2MWA ..................................................................................................................................................................17
9.2 MSR-B2MWA-DONGLE...............................................................................................................................................17

MSR-B2MWA, MSR-B2MWA-DONGLE Hardware Manual
M2I Corporation
11-35, Simin-daero 327beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do, 14055，Republic of Korea
4 / 17
Chapter 1. Safety Precautions
Before using the product
To use the product safely and effectively, please read the contents of this manual thoroughly before use.
Please keep to the safety precaution, for it is to prevent accidents and potential danger from occurring.
Safety precaution is classified into ‘Warning’ and ‘Caution’ and their meanings are as follows. Also the
indicated illustrations on the product and in the manual have the following meanings.
Violating the instruction may result in serious personal injury or death.
Violating the instruction may result in slight personal injury or product damage.
Be cautious, for danger may be present.
Be cautious, for there is a possibility of an electric shock.
General Precautions
Do not press the screen with a hard or sharp object (awl, screwdriver, pen) with too strong a force. It may
cause malfunction of touch due to damage of the front sheet.
Do not use or store in an environment with high vibration.
Do not allow foreign objects such as water, liquids, or metal powders to enter the product. This may cause
breakage or electric shock.
Do not allow foreign objects such as water, liquids, or metal powders to enter into the front(screen)
protective sheet. The screen may be invisible or may cause a malfunction of the touch.
Use the radio or mobile phone at least 30cm away from the main unit.
Two or fewer bright spots may appear on the display, and certain areas may appear brighter, but this is not
a defect in display characteristics.
Do not store or operate in direct sunlight. Direct sunlight can change the properties of the display.
Do not touch the adapter or power cord with wet hands. There is a risk of electric shock.
Do not charge or use the battery in explosive environments with flammable liquids, gases, or dust.
When storing the product for a long time without using the product, store it in a dry environment without
direct sunlight.
Record/store your data separately. When the product is repaired, the main contents of the device may be
deleted.
Installation Precautions
Do not install the location which exceeds allowed temperature. Product can be damaged or shorten the life.
Especially Install environment as below should be avoided.
Do not Install product to the place which the ambient temperature is out of limits, from 10℃to 45℃or on the surface
of control board which high pressure equipment is installed.
Do not install to the place where strong shock or vibration continuously have impacted on product.
When leaving for a long time without using the product, charge it and store it at room temperature.
Indoor use.
Altitude up to 2000m.

MSR-B2MWA, MSR-B2MWA-DONGLE Hardware Manual
M2I Corporation
11-35, Simin-daero 327beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do, 14055，Republic of Korea
5 / 17
Disposal Precautions
When you dispose of product and battery, please treat it as industrial waste. It can create poisonous
substances or explosion.
Chapter 2. Overview
2.1 Product Introduction
This industrial Barcode reader is an industrial control device required in industrial field.
It is a device that is used for basic purposes to communicate with other devices (PC, HMI, etc.) using
high durability and wired / wireless communication.
This unit is battery operated and highly portable for universal use.
2.2 Package Contents
The components of the product are as follows.
Before using the product, please check that all of the following components are included.
Item
Figure
Quantity
Product
(MSR-B2MWA)
1
RF Wireless Dongle
(MSR-B2MWA-DONGLE)
1
Manual
1
Strap
1
USB charge cable
(Charge & Data combined)
1

MSR-B2MWA, MSR-B2MWA-DONGLE Hardware Manual
M2I Corporation
11-35, Simin-daero 327beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do, 14055，Republic of Korea
6 / 17
Chapter 3. General Specifications
3.1 Power Specifications
Rated Input Voltage (Vin)
DC 5.0V
Battery Voltage Range
DC 3.20V ~ 4.20V (Standard : 3.70V)
Internal
Battery Pack
Cell Type
Lithium - ion (1S1P)
Consumption
3.0W less
Operating time
13 Hours (*Low Voltage Warning)
Charging time
5.5 Hours (*Full Charge)
Charging Capacity
1800mAh(Minimum)
1800mAh(Nominal)
* Operating time and charging time are based on 25 ℃ ambient temperature and may vary depending on the ambient temperature.
** The operating time may vary depending on the usage pattern.
3.2 Display and Memory Specifications
Type
1.3" OLED
Resolution(dot)
128 x 64
Internal Memory
512KB
3.3 functional Specifications
Barcode Scanner
Sensor resolution & Scan type
640(H) x 400(V), 1D/2D CMOS Barcode
Data storage internal memory
32,768 Code (*GTIN-08 / EAN-8)
24,966 Code (*GTIN-13 / EAN-13)
23,831 Code (*GTIN-14 / ITF-14)
Light Source
Aiming 610nm LED, Illumination 660nm LED
Alarm
Buzzer and LED light
LED indication
Power ON(Green), Charging(Red), Status Indication
Action button
Power, Scan, Up, Down, Send, Erase
* The storage capacity may change depending on the manufacturer.
3.4 Antenna information
Antenna Model Name
ANT3216LL00R2400A
Antenna Type
Internal Antenna
Manufacturer
YAGEO
3.5 Environment Specifications
Operation Temperature (℃)
Main body : +10 ~ +45 / RF wireless dongle : -10 ~ +50
Storage Temperature (℃)
-20 ~ +60
Operation Humidity (%RH)
0 ~ 90 (No dew)
Atmosphere
No corrosive gas
Vibration Endurance
Amplitude: 10≤F＜25㎐(2G) X,Y,Z each direction(for 30 minutes)
Noise Immunity
1000Vp-p(Pulse width 1㎲)
Static Electricity Discharge
Connective discharge from EN61000-4-2: ±4㎸

MSR-B2MWA, MSR-B2MWA-DONGLE Hardware Manual
M2I Corporation
11-35, Simin-daero 327beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do, 14055，Republic of Korea
7 / 17
BARCODE LED Classification
Exempt Risk Group LED product per IEC/EN 62471
Protection Classification
Product body IP67
3.6 Structure Specifications
Weight(g)
MSR-B2MWA
MSR-B2MWA-DONGLE
180
3
Cooling System
Natural air circulation
Case Material
PC(Flame Retardant) and Urethane
Chapter 4. Part Names and General Specifications
4.1 MSR-B2MWA and MSR-B2MWA-DONGLE
Item
W (mm)
D (mm)
H (mm)
MSR-B2MWA
54 mm
143.5 mm
36 / 28.2 mm
MSR-B2MWA-DONGLE
18 mm
28.8 mm
8mm

MSR-B2MWA, MSR-B2MWA-DONGLE Hardware Manual
M2I Corporation
11-35, Simin-daero 327beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do, 14055，Republic of Korea
8 / 17
4.2 Part Names and Specifications
No.
Item
Description
①
Power Switch
Power ON, OFF Switch
②
Scanner window and IrDA
barcode scanner window and IrDA
③
OLED
1.3" OLED Display
④
Power LED
Display the System Power State
⑤
UP Switch
UP Switch
⑥
SEND Switch
SEND Switch
⑦
Charge status indicator
Red: Charging, OFF: Charged
⑧
DOWN Switch
DOWN Switch
⑨
SCAN Switch
SCAN Switch
⑩
ERASE Switch
ERASE Switch
⑪
Buzzer hall
Buzzer sound
⑫
Status indicator
Green: scan success, Yellow: data transfer and deletion
⑬
Strap fixing hole
Strap Attached Hole
⑭
Back cover
USB connector cover
⑮
USB Dongle
USB Dongle and Case for RF Wireless Communication
* Model Name: MSR-B2MWA-DONGLE

MSR-B2MWA, MSR-B2MWA-DONGLE Hardware Manual
M2I Corporation
11-35, Simin-daero 327beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do, 14055，Republic of Korea
9 / 17
Chapter 5. Interface
In order for the main unit to communicate with an external device, it is necessary to connect the two devices
by referring to the following.
5.1 USB
Form
Item
Description
USB Interface
EHCI/OHCI Specification Version 1.0, USB 1.1 compatible
Communication Method
Control/Bulk
Transfer Speed
Max. 12Mb/s
Connector Type
Type C
5.2 RF Wireless Communication
(Dedicated wireless dongle required. * Model Name: MSR-B2MWA-DONGLE)
Form
Item
Description
RF Interface
IEEE 802.15.4
Transfer Speed
Max. 2Mb/s
Frequency Range
2322 ~ 2527 MHz
Supporting OS
Windows 98SE/2000/XP/VISTA/7/10(32/64bit)
Connect
Wireless dongle
5.3 IrDA
Form
Item
Description
Connection distance
1.0 M (May vary depending on the use environment)
Transfer Speed
115.2k bit/s
Peak wavelength
900 nm
Connection device
(M2I) TOPRD□□30□Dedicated Communication Port

MSR-B2MWA, MSR-B2MWA-DONGLE Hardware Manual
M2I Corporation
11-35, Simin-daero 327beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do, 14055，Republic of Korea
10 / 17
Chapter 6. Installation
6.1 Specifying Install Location
1) Where the operation of the body is guaranteed.
2) Easy connection and disconnection of main body and charging cable.
3) Where the body and dongle are open.
4) Out of direct sunlight.
6.2 Battery Charging
Connect the bottom of the terminal to the USB cable (USB-C Type).
6.3 Dongle Installation
A separate wireless dongle is provided for RF wireless communication between the main unit and the device.
There is no need to install a separate driver using the Windows built-in driver.
6.4 Infrared Communication (IrDA)
This device is for infrared communication with M2I Corporation TOPRD□□30□.