MA grandMA3 User manual

© 2022 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone [phone] - [e-mail] - www.malighting.com
1
Dual encoders
The five dual encoders are used to adjust the different attributes of the fixtures. There are four different actions on the
encoders:
Turn the inner ring to adjust the attribute "Coarse".
Turn the outer ring to adjust the attribute "Fine".
Press the inner ring to open a calculator to type in the value.
Press and turn the inner ring to adjust the attribute "Coarse" with a higher speed.
Press the dual encoder key to open a calculator to type in the value. The dual encoder key replaces the press function
of the outer ring.
Hint:
If Dimmer is the selected attribute, the inner ring adjusts with 1 percent per click and the outer ring adjusts
with 0.01 percent per click.
These encoders are placed above the command section.
Location on grandMA3 full-size and grandMA3 light consoles
1 of 3
grandMA3 User Manual – Device Overview – Control elements
Version 1.2 – 2022-11-24
English

© 2022 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone [phone] - [e-mail] - www.malighting.com
1
Location on grandMA3 compact consoles and grandMA3 onPC command wing and command wing XT
Each of the dual encoders is numbered 1 to 5 from left to right. There are three elements in each encoder:
The inner ring
2 of 3
grandMA3 User Manual – Device Overview – Control elements
Version 1.2 – 2022-11-24
English

© 2022 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone [phone] - [e-mail] - www.malighting.com
1
The outer ring
The dual encoder key
3 of 3
grandMA3 User Manual – Device Overview – Control elements
Version 1.2 – 2022-11-24
English