Macab DM220T User manual
DVB-T / DVB-C
DM220T
Digital Twin A/V DVB-T/DVB-C Modulator
s
!QUICK START GUIDE
2
!Connecting Up
!Front Overview
!Back Overview
RF Output
Buttons
Up/Down/Left/Right
Buttons
Menu/OK/*
Display
12 V DC Service PortVideo/Audio (L+R)
Input CH01 + CH02
BUTTONS
Up - Use this button to select settings in menus.
Left - Use this button to move position in menus.
Right - Use this button to move position in menus.
Down - Use this button to select settings in menus.
OK - Jump to next menu choice.
MENU - Use this button to activate the menu. For Advanced Menu press with Up button.
*- Will save with current configuration without moving to end of menu setup.
12 V DC
For Service issues
Cable TV net (COFDM)
3 x RCA
Video - Audio (L+R) 3 x RCA
Video - Audio (L+R)
3
!Power Up & Basic Menu Overview
Region
UK
Channel
21 [474.000]
Network Name
RSD (UK)
Active Channels
2
Set LCN Mode
LCN UK
Service ID EN1
0032
LCN
150
Name
Encoder 1
LCN
151
Name
Encoder 2
Save Settings
YES
Normal User menu ”Get me going ASAP”
Power Up Sequence
Press Menu > OK
YES to Save
NO to Cancel
DM220T Boot V2.1
Booting...
DM220T Modulator
s2.02e v0.35
1: Running.
21 [474.000] lck
1: Pal 50Hz
21 [474.000] lck
1: Pal 1:1
21 [474.000] lck
2: NO VIDEO
21 [474.000] lck
Running.
21 [474.000] lck
Trans Stream ID
0001
Service ID EN2
0033
NOTE
Channel Output Frequencies vary with chosen region.
4
!Advanced Programming Menu
1. Enter the “Advanced Menu” by pressing both Menu & Arrow Up at the same time.
!Connecting to Mixed Digital & Analogue Networks
Due to the high power level output from the DM220T it is recommended to fit an external F type attenuator
when connecting to a mixed Digital & Analogue network.
Typical attenuator values will be in the region of 15 - 30dB.
!Switching from DVB-T to DVB-C Modulation Formats
1. Press “Left” and “Right” arrow keys and “*” at the same time to enter the modulation format
menu.
2. Use arrow “Up/Down” to select format.
3. Press “*” to save.
4. Power cycle DM220T to re-boot with the new format.
5. Note menu choices will vary depending on the modulation format selected.
!Support & Downloads
For further information, support and downloads please visit www.rsd.tv & click on “Support”.
