Macally MVENTQI User manual

MVENTQI
User guide
VENT MOUNT PHONE HOLDER
WITH WIRELESS QI CHARGER

USER GUIDE
About this guide
Before you start using the Macally MVENTQI,
be sure to read this guide in its entirety.
Package contents
• MVENTQI
• USB charging cable
• USB car charger
• User guide
Hardware basics
Safety intructions
Thank you for purchasing the Macally MVENTQI. The
Macally MVENTQI is a car vent mount holder that
allows you to wirelessly charge any Qi enabled
smartphone, with or without a protective case,
between 2.1" ~ 4.7"/5,4 ~ 12 cm. The mount has a
360-degree rotatable holder for the best viewing angle
which allows you to do hands-free phone calls and
use your smartphone as a navigator without blocking
your view. The holder has adjustable grips and foot
support to easily align your Qi enabled smartphone
with the Qi charging coil position for optimal charging
and a secure grip. Optimized for wireless fast
charging, it charges up to 40% faster than standard Qi
wireless chargers (only applicable to smartphones
that are also wireless fast charge enabled). It also has
built-in FOD which means that when it detects a
foreign object on your Qi enabled smartphone, such as
a metal plate, the charging process will promptly stop
to prevent overheating and damage to your
smartphone. The Macally MVENTQI works with most
horizontal and vertical air vents, a built-in USB port or
USB car charger and any Qi enabled smartphone
between between 2.1" ~ 4.7"/5,4 ~ 12 cm, like iPhone
XS, XR, X, 8 Plus and 8, Samsung Galaxy S9 Plus, S9
and Note 8, Nokia 8 Sirocco, LG G7 ThinQ and V35
ThinQ, Sony Xperia XZ2 and XZ2 Premium, etc.
Please read the following carefully before using this
Macally product. Incorrect use of this product may
result in reduced performance, permanent damage
and void warranty:
1. Do not place this product near a heat source.
2. Operating temperature of 5°C to 40°C. Storage
temperature of 0°C to 60°C.
3. Do not place this product near moisture nor liquids.
4. Operate and store at humidity of 5% to 90%
(non-condensing)
5. Do not place heavy objects on this product.
6. Do not drop this product.
7. Do not dispose this product in the garbage. Take it
to your local recycling centre.
Foot Support
Release Button
USB-C
charging
port
Support stand
LED indicator
Green - Standby
Red - Qi charging
Green and red alternating -
Foreign Object Detected
Cradle Arm
Release Button
Triangle alignment
marks (for the best
Qi charging
efficieny)
Expandable
Cradle Arms
Qi Charging Coil
Pull Down Foot Support
for Proper Qi Alignment
QI Holder Front
USB Car Charger
QI Holder Back
Side view
Red/Qi charging port:
3.6~6.5V/3A, 6.5~9V/2A,
9V-12V/1.5A
White:
5V/2.4A
Support stand
release buttons
Vent Clamps
Swivel ball-head
Screw handle

1. Attach the holder to the vent mount by placing
holder on top of the base and sliding it downward
until it clicks and locks.
3. Insert the clamp into the air vent and tighten it
securely into place by turning the screw handle
clockwise.
4. Press the support stand release buttons and
swivel the stand until it sits on the surface of your
vehicle to support the mount.
6. Press the holder grip and foot support release
buttons on the back of the cradle to expand the
arms and pull down the foot support.
7. Place your smartphone in the holder and align
the center of your smartphone with the triangle
marks on the grips for best Qi charging efficieny.
8. Push the foot support upward until the bottom of
your smartphone rests on it. Press both holder
grips inward until they hold the smartphone firmly.
Your smartphone will automatically start to charge.
5. Connect the USB-C end of the charging cable to
the cradle and the other end into the red USB-A
port of the included USB car charger.
2. Find a visible and reachable location on any of
your cars air vents to attach the phone holder.
How to use the MCUPXLQI
①
②

Copyright © 2019 Macally Peripherals
Technical support
Warranty
Macally Peripherals warrants that this product will be free from
defects in title, materials and manufacturing workmanship for one
year in North America from the date of the purchase. If the product
is found to be defective then, as your sole remedy and as the
manufacturer’s only obligation, Macally will repair or replace the
product. This warranty is exclusive and is limited to the Macally
MVENTQI. This warranty shall not apply to products that have been
subjected to abuse, isuse, abnormal electrical or environmental
conditions, or any condition other than what can be considered
normal use. The liability of Macally Peripherals arising from this
warranty and sale shall be limited to a refund of the purchase price.
In no event shall Macally Peripherals be liable for costs of
procurement of substitute products or services, or for any lost
prots, or for any consequential, incidental, direct or indirect
damages, however caused and on any theory of liability, arising
from this warranty and sale. These limitations shall apply
notwithstanding any failure of essential purpose of any limited
remedy.
Warning
• Do NOT mount/unmount/adjust the car phone mount while
driving your car. Please pull over and come to a stop where it is safe
to do so and does not impede trac, and only then you can
mount/unmount/adjust the car phone mount.
• Do not place any metallic objects on the Qi charger
• Before charging, please remove any protective case with a ring,
popsocket, credit card holder and any metal plate from your
smartphone. Failing to do so can cause serious damage to your
Smartphone and charger!
For tech support please call [phone] or
e-mail us at [email protected]. Tech
support hours are from 8:30 AM to 5:30 PM
Monday through Friday (Pacific Standard Time).
Phone
center line
Aligned with triangle
marks for the best QI
charging efficiency
Phone
center line
Triangle
marks
9. To switch between vertical and horizontal
viewing angles, simply rotate the holder as needed.