©July 2004 Martin Professional A/S Specifications are subject to change without notice.
Mach Speakers A/S • Perspektivvej 2 • 9900 Frederikshavn • Denmark • Tel. +45 98 43 35 66 • Fax +45 98 43 14 15 • www.mach.dk
Professional Product
A
• MACH TF (tool free) mounting
bracket with unique, 6 vertical and
6 horizontal positions.
• Auxiliary mounting bracket that can
flexibly adapt to any imaginable
solution, including extremely tight
surface mounts.
• Natural clear sound
• Weather resistant housing and
transducers
• Quick release system for mounting
speaker on bracket without tools
• Easily attached Safety Wire between
speaker and bracket.
• Push button terminals
• The complete MACH solution
included in every box: 2 Speakers,
2 MACH TF brackets, 2 Auxiliary
brackets, 2 Safety wires, 8 Screws,
8 Wall plugs and 1 Manual
The Ci 4, 6 and 8 are extremely straightforward to install with minimum of tools
required for mounting and adjusting. All necessary brackets and auxiliary brackets
are included as standard.
The Ci series have been designed as two way speakers with a conical horn delivering
uniform dispersion allowing further flexibility to positioning.
SPECIFICATIONS: CI 4 CI 6 CI 8
Power rating IEC 268: 50W 65W 125W
Power rating peak: 200W 260W 500W
Sensitivity 1w/1m: 87dB 89dB 93dB
Max SPL, peak: 110dB 113dB 120dB
Max SPL, calculated long term: 104dB 107dB 114dB
Frequency response +/- 3 Db: 120Hz – 20Hz 90Hz – 20Hz 70Hz – 20Hz
Configuration: 4” woofer + ¾” soft dome tweeter 6” woofer + ¾” soft dome tweeter 8” woofer + 1” soft dome tweeter
Dispersion angle: 90x90 degree conical 90x90 degree conical 90x90 degree conical
Nominal impedance: 8 ohm 8 ohm 8 ohm
Recommended Amplifier: 70W 100W 175W
WEIGHT, MEASUREMENTS AND
PHYSICAL SPECIFICATIONS:
Dimensions (HxWxD): 207x150x120 mm
8,15x5,91x4,72 in
275x200x160 mm
10,83x7,83x6,30 in
395x290x220 mm
15,55x11,42x8,66 in
Net weight: 2,5 kg (5 lbs) 4 kg (9 lbs) 6 kg (13 lbs)
Finish: Molded cabinet Molded cabinet Molded cabinet
Grille: 1 mm aluminum with foam backing 1 mm aluminum with foam backing 1 mm aluminum with foam backing
Input Connectors: Push terminals Push terminals Push terminals
Rigging hardware included: MACH TF bracket
Aux Mounting bracket
MACH TF bracket
Aux Mounting bracket
MACH TF bracket
Aux Mounting bracket
360˚ of excellence. At every angle the
C-Range brings you ergonomics in design
and functionality.
Ci4, Ci6, Ci8