MachPower EB-TSTR-033 User manual

User Manual
FOR TOUCH MONITORS FROM: 55" TO 80"
EN
Manuale Utente
PER MONITOR TOUCH DA: 55" A 80"
ITA
Manual de usuario
PARA MONITORES TÁCTILES DE: 55"A 80"
ES
EB-TSTR-033

2

ENG
3
Index
Package contents
Installation of the poles at the base
Installation of telescopic mounting poles
Shelf installation
Installation of the support
VESA mounting plans
Monitor assembly diagram
Monitor mounting on the stand
Installing the webcam stand
Cable installation
Product specifications
5
6
7
8
9
10
11
12
13
14
16

4
Warning!
Read the following manual carefully before starting. Improper installation or as-
sembly could cause serious personal injury and property damage.
If you have difficulty assembling or have questions, contact a qualified installer.
Do not install or assemble the product in case there are damaged or missing par-
ts, if spare parts are needed, contact the dealer.
The product fits most of the 55 "- 80" LCD / plasma screen; maximum weight of
the LCD / plasma screen: 90.9 kg: maximum shelf load 11.4 kg .; Maximum shelf
load for webcam: 4.5 kg.
Do not use this product for different purposes.
This product contains moving parts, use with caution.
The manufacturer declines all responsibility for modifications, improper instal-
lation or installation beyond the specified weight. The manufacturer will not be
responsible for any damage resulting from the use or inability to use the product.
The images are for illustrative purposes.

5
ENG
Package contents

6
Installation of the poles at the base
Note
Make sure that the windows for the management and for the passage of the
cables are turned towards the back of the base.
Caution
Make sure the screws are securely fastened.

7
ENG
Installation of telescopic mounting poles
Step1
Unscrew the screw located on the lower right part of the pole, using J (Allen key).
Save the vine. As shown in Fig-1.
Step2
Use both hands to raise and rotate the right pole to the desired height. Then ro-
tate the pole again until the holes match and insert the spring ball. Firmly fix the
screw as shown in fig-2.
Step3
Repeat step 2 with the left post.
right upper poles
left upper poles
height label
right lower pole
left lower pole
safety screws
safety screws
figure 1 figure 2

8
Shelf installation

9
ENG
Caution
Make sure the screws are securely fastened.
Choose the height of the shelf and screw to lock.
Installation of the support

10
Caution
Make sure the screws are securely fastened.
VESA mounting plans
VESA 200x200 mm - 800x500 mm