C300z PRECISION PASSIVE
LOUDSPEAKER
1/6 PAGES
FEATURES:
■2-way portable Precision Passive loudspeaker system
■750W / 300W RMS peak power handling at 8
■12” long-throw low-frequency transducer with
3” voice coil
■High-output 1.75" titanium compression driver
■Ultra-wide, smooth dispersion via multi-cell horn
aperture and constant directivity horn
■
Integrated Low Impedance Compensated Crossover (LICC)
with full driver protection
■Lightweight for ultimate portability (46 lb / 20.9 kg)
■Asymmetrical trapezoidal cabinet for floor monitor
positioning
■Stand / Pole-mountable
■Flyable via ten M10 rigging points using the optional
eyebolt kit
C300z
Featuring legendary Mackie sound quality and durability, the
lightweight C Series 2-way Precision Passive loudspeakers
deliver optimum performance in portable PA, stage
monitor and permanent installation applications. The C300z
is a full-range portable loudspeaker providing high-output,
ultra-wide dispersion and low-distortion performance in a
compact, composite molded enclosure.
A heat-treated titanium compression driver with multi-cell
aperture directs pristine highs through an exponential high-
frequency waveguide, allowing for ultra-wide dispersion of
highs and mids. In fact, the C300z can deliver clear, smooth
sound to audience members up to 45° off axis.
The custom-designed high-power 12-inch woofer can take a
pounding, plus its 3-inch voice coil allows the driver to run
cooler, delivering consistent performance even after long
hours of use at near peak volumes.
The crossover in the C300z is a unique Low Impedance
Compensated Crossover (LICC) design. With EQ and
crossover points meticulously chosen so that beamwidth
patterns match in both drivers, C300z loudspeakers offer
natural sound at all volume levels.
The center of gravity, handle locations, handle design,
position of fly-points and ease of use have been
ergonomically designed. There is also an integrated pole
mount on the bottom of the cabinet and a weather-resistant
steel grille. The asymmetrical trapezoidal cabinet has been
designed to provide an ideal floor monitoring position.
The cabinet is constructed of high-pressure injected
polypropylene. The enclosure features reinforcement ribbing
and structural strengthening resulting in a strong, super-
rigid design providing ideal acoustical characteristics.
APPLICATIONS
Small to mid-size club/band PA systems, houses of worship,
DJs, vocal/band monitor wedges, gymnasiums, banquet
halls, conference rooms and many, many more.
