Magellan MAP330 - MapSend CD For Meridian User manual

MAP 330
Quick Reference
Turning MAP 330 On
Startup
screens ENTER
Setting Display Backlight
Hold for
2 sec.
Adjusting ontrast
MENU Contrast
ENTER
Choose
Selecting Nav Screen
NAV
or ESC
Saving a Waypoint
MARK Hold for
2 sec. ENTER
1
1Change waypoint data
as needed
reating a GOTO Route
GOTO Select database
category
ENTER
“Destination Waypoint”
Highlight
1
1Choosing Alpha or Nearest
will alter how the destination
waypoint is selected
960 Overland Court
San Dimas CA 91773
[phone]
ENTER
Battey Installation
+
+-
-
Specifications
12 parallel-channel technology
tracks up to 12 satelites
Quadrifilar antenna
Acquisition times of 15 seconds
for warm start 1 minute for cold
start
Update rate: 1 second continuous
Accuracy: 49 feet (15 meters) RMS
Maximum computed speed of
951 mph; maximum computed
elevation of 17 500 meters
Weatherproof with wraparound
rubber armor
Powered by 2 AA batteries or
9-35 VDC external power source
Battery life with display backlight
turned off of 10 hours
PN 630779
Do NOT remove batteries from
the MAP 330 while it is turned on.

Navigational Screens
Map Screen
Access map
setup features
& MAP 330
functions
ompass Screen
Large Data Screen
Position Screens
Sat Status Screen
MENU
OUTIN Zoom
Pan to map
objects
MENU Access
customize
features
& MAP 330
functions
MENU Access
customize
features
& MAP 330
functions
MENU Access
customize
features
& MAP 330
functions
MENU Access
MAP 330
functions
Access 2nd
Position
screen
Setup
Accessing Setup
ENTER
Use after travelling over
500 miles with MAP 330
turned off or after memory
loss.
MENU Setup
Highlight
Setup Options
Initialize
Nav Screens
Turns navigation
screens on/off
Coord System
Default: LAT/LON,
DEG.MIN.MMM
Map Datum
Default: WGS84
Elev Mode
Default: 3D
Time Format
Default: Local AM/PM
Nav Units
Default: Miles/MPH
Nort Ref.
Default: Magnetic
Lig t Timer
Default: 4 Minutes
Beeper
Default: Keys & Alarms
NMEA
Default: Off
Baud Rate
Default: 4800 Baud
Clear Memory
Clear track history,
wpts/routes, back wpts,
routes, reset defaults or
all.
Simulate
Activate simulator in User
or Auto mode or turn off
simulator.