Garmin nuvi 2465 Instruction manual

nüvi
®
2465
quick start manual

nüvi 2465 Quick Start Manual 1
Getting Started
WARNING
Refer to the Important Safety and
Product Information guide available
on www.garmin.com for product
warnings and other important
information.
When using your device for the rst
time, complete the following tasks.
1. Mount the device (page 1).
2. Connect the device to vehicle
power (page 2).
3. Register the device (page 3).
4. Check for updates.
• Software and map updates
(page page 3)
Mounting Your Device
NOTICE
Before mounting the device, please
refer to the Important Safety and
Product Information guide for
information about laws pertaining to
windshield mounting.
1. Remove the clear plastic from the
suction cup.
2. Clean and dry your windshield
and the suction cup with a lint-free
cloth.
3. Press the suction cup to the
windshield.
4. While pressing, ip the lever back
toward the windshield.
5. Snap the mount ➊ onto the
suction cup arm ➋ .

2 nüvi 2465 Quick Start Manual
➊➋
6. Fit the bottom of your device into
the mount.
7. Tilt your device back until it
snaps into place.
Connecting the Device
to Vehicle Power
WARNING
This product contains a lithium-ion
battery. To prevent the possibility of
personal injury or product damage
caused by battery exposure to
extreme heat, remove the device from
the vehicle when exiting or store it
out of direct sunlight.
Charge your device before using it on
battery power.
1. Plug the vehicle power cable into
the mini-USB connector ➊ on the
mount.
➊
2. Plug the other end of the vehicle
power cable into a power outlet in
your vehicle.

nüvi 2465 Quick Start Manual 3
3. If you are using a trafc receiver
in Europe, connect the external
antenna to the trafc receiver and
secure it to the windshield using
the suction cups.
After the device has been connected
to vehicle power, the following
occurs.
• The device turns on.
• The device acquires satellite
signals. When at least one of
the bars is green, your
device has acquired satellite
signals.
NOTE: The device may need
a clear view of the sky to
acquire satellite signals.
• The device charges as you
drive. in the status bar
indicates the status of the
internal battery.
Registering the Device
Go to www.my.garmin.com for
registration
Updating the Software and
Maps
Go to www.garmin.com.sg for
software and map updates
nüMaps Guarantee™
Your device is eligible for one
free map update within 60 days of
acquiring satellites while driving with
your nüvi. You are not eligible for
the free map update if you register
by phone or wait longer than 60
days after the rst time you acquire
satellites while driving with your
nüvi. For more information, go to
www.garmin.com/numaps.

4 nüvi 2465 Quick Start Manual
Device Overview
➊
➋
➊
Power key
➋
microSD
™
card slot
Using the Power Key
Press and quickly release the
Power key to view additional
options.
• Touch and drag the scroll bar
to adjust screen brightness.
• Touch Lock to prevent
accidental screen touches (nüvi
2360 only).
• Touch Power Off to turn off
your device.
• Press and hold the Power key
to reset the device.
• Press and quickly release the
Power key to exit the menu.
About Points of Interest
The detailed maps loaded in your
device contain points of interest,
such as restaurants, hotels, and auto
services.
Finding a Point of Interest by
Category
1. From the Main menu, touch
Where To? > Points of Interest.
2. Select a category.
3. If necessary, select a subcategory.
4. Select a destination.
5. Touch Go!.

nüvi 2465 Quick Start Manual 5
You can touch > Save on
this page to save the location to
a Favorites folder on the device.
Use the Favorites folder to save
the location of your workplace,
home, and other common
destinations.
6. If necessary, select an option.
• Touch Drive to calculate a
route you will navigate by
driving.
• Touch Walk to calculate a
route you will navigate by
walking.
• Touch Public Transit to
calculate a route that combines
public transit and walking.
NOTE: You must have
cityXplorer™maps loaded to
navigate using public transit.
Go to www.garmin.com to
purchase cityXplorer maps.
Using the Main Menu
➊
➋ ➌
➍ ➐ ➑➎ ➏
• Touch ➊ to select a transportation
mode.
• Touch ➋ to nd a destination.
• Touch ➌ to view the map.
• Touch ➍ to stop a route.
• Touch ➎ to detour a route.
• Touch ➏ to start Voice Command
• Touch ➐ to adjust the volume.
• Touch ➑ to open the menu of
tools and settings.

6 nüvi 2465 Quick Start Manual
Your Route on the Map
NOTICE
The speed limit icon feature is for
information only and does not replace
the driver’s responsibility to abide
by all posted speed limit signs and to
use safe driving judgment at all times.
Garmin will not be responsible for
any trafc nes or citations that you
may receive for failing to follow all
applicable trafc laws and signs.
➊ ➋
➌
➍ ➎
➏➐
➑➒➓
Your route is marked with a magenta
line on the map. If you depart from
the original route, your device
recalculates the route. A speed limit
icon could appear as you travel on
major roadways.
• Touch ➊ to view the next turn. If
a view of the junctions exists, the
junction view appears.
• Touch ➋ to view the turn list.
• Touch ➌ to zoom in and out.
• Touch ➍ to return to the Main
menu.
Touch and hold from any screen to
return to the Main menu.
• Touch ➎ to change the data eld.
• Touch ➏ to view the Where Am
I? page.
• Touch and drag ➐ to view a
different area of the map.
• Touch ➑ to view the trip
computer.
• Touch ➒ to change the speed limit
if the speed limit icon shown on
the map is incorrect.
• ➓ represents “lane info”, leading
you the exact direction.

nüvi 2465 Quick Start Manual 7
Using myTrends
As you drive with the device on,
myTrends™gathers information that
allows the device to predict when
you are traveling to a common
destination, like your workplace or
home. When myTrends is activated,
the destination and estimated time of
travel will appear in the navigation
bar on the map.
myTrends only works for locations
that are saved as Favorites (page 5).
When myTrends information
appears in the navigation bar,
touch the navigation bar to view
route information.
Avoiding Road Features
1. Find the main menu, touch Tools
> Settings > Navigation > car >
nüRoute > Avoidances.
2. Select the road features to avoid
on your route.
3. Touch Save.
About the Transportation
Modes
Automobile mode
Pedestrian mode
Routes are calculated differently
based on your transportation mode.
For example, in Automobile mode,
estimated time of arrival is calculated
using the speed limit of the roads on
the route. Pedestrian mode calculates
time of arrival based on walking
speed.
Changing Your Transportation
Mode
1. From the Main menu, touch the
transportation mode icon.
2. Select a mode.
3. Touch Save.

8 nüvi 2465 Quick Start Manual
Using the On-Screen
Keyboard & Handwriting
Pad
When an on-screen keyboard appears,
touch a letter or number to enter it.
Touch to add a space. Touch ◄
and ► to move the cursor. Touch
to delete a character. Touch and hold
to erase the entire entry. Touch
Mode to select the keyboard language
mode. nüvi 2465 supports keyboards
in English, Japanese, Korean,
simplied Chinese, and traditional
Chinese.
You can also use the on-screen
handwriting pad to enter characters
in English, simplied Chinese, and
traditional Chinese.
About Trafc
NOTICE
Garmin is not responsible for the
accuracy or timeliness of the trafc
information.
The FM Trafc Message Channel
(TMC) subscription is automatically
enabled and does not require an
addition subscription purchase to
activate. The FM TMC trafc receiver
is available in retail shops. Contact
your local distributor for more
information.
TMC is only available in Singapore
with NAVTEQ Maps

nüvi 2465 Quick Start Manual 9
Manually Avoiding Trafc on
Your Route
1. From the map, touch .
2. Touch Trafc On Route.
3. If necessary, touch the arrows to
view other trafc delays on your
route.
4. Touch Avoid.
Viewing the Trafc Map
The trafc map shows color-coded
trafc ow and delays on nearby
roads.
1. From the map, touch .
2. Touch Trafc Map to view the
trafc incidents on a map.
About Voice Command
NOTICE
Voice Command supports British
English only not supports Bahasa
Malay. Some functions may be
invalid.
The Voice Command feature allows
you to use your device by speaking
the words you see on the screen or
by speaking certain commands. The
Voice Command menu provides a list
of available commands to use.
Activating Voice Command
1. Speak Voice Command.
The voice command menu
appears.
2. Press ASR icon. The voice
command menu appears.

10 nüvi 2465 Quick Start Manual
Tips for Using Voice
Command
• Talk in a normal voice directed at
the device to speak a command
exactly as it appears on the screen.
• Respond to voice prompts from
the device as needed.
• Speak numbers to enter numbers.
• Speak Exit to exit Voice
Command.
Navigating with Voice
Command
1. Speak your wakeup phrase.
The voice command menu
appears.
2. Speak Find by Name.
3. Listen for the voice prompt and
speak the name of the place.
The device repeats the name of the
place as it is searching.
A list of locations appears.
4. Speak the line number of the
location you want.
5. Speak Yes to navigate to the
location, or speak No to go back
to the list of found locations.
Compass
Garmin’s new generation GPS, nuvi
2465 not only provide navigation for
drivers but also has a built-in compass
to pinpoint direction.
Touch Tool →Compass to start
Enter place or city for your
destination. The compass will vary on
the move for pinpointing direction.

nüvi 2465 Quick Start Manual 11
NOTICE
GPS device close to magnet or
magnetic items may affect compass
accuracy.
The compass indicates nal
destination’s direction even from a
long distance.
An example below pinpoints Tokyo.
Hands-free Features
Pairing Your Phone
Hands-free calling is available on
some nüvi models. Before you can
pair, your phone and the device must
be turned on and within 33 ft. (10 m)
of each other.
1. Enable the Bluetooth®component
on your phone.
2. Touch Tools > Settings >
Bluetooth.
3. Touch Bluetooth > Enabled >
Save.
4. Touch Add Phone > OK.
5. Select your phone, and touch OK.
6. Enter the Bluetooth PIN (1234)
for your device in your phone.

12 nüvi 2465 Quick Start Manual
Power Cables
Your device can be powered by the
following ways:
• Vehicle power cable
• USB cable (optional accessory)
• AC adapter (optional accessory)
Getting More Information
You can nd more information about
this product on the Garmin Web site.
• Go to http://www.garmin.com.sg/
products/ontheroad/
• Go to http://buy.garmin.com to
purchase accessories.
• Touch Tools > Help.
Contacting Garmin
Product Support
Contact Garmin Product Support if
you have any questions about this
product:
• Go to http://www.garmin.com.
sg/support, or e-mail marketing.
[email protected], or call Garmin
Asia at [phone] ext 2

nüvi 2465 Quick Start Manual 13
Garmin®, the Garmin logo, and nüvi®
are trademarks of Garmin Ltd. or its
subsidiaries, registered in the USA
and other countries. cityXplorer™,
myTrends™, and nüMaps Guarantee™
are trademarks of Garmin Ltd. or
its subsidiaries. These trademarks
may not be used without the
express permission of Garmin. The
Bluetooth®word mark and logos are
owned by the Bluetooth SIG, Inc.,
and any use of such name by Garmin
is under license. Mac®is a trademark
of Apple Computer, Inc., registered in
the U.S. and other countries.
© 2010–2011 Garmin Ltd. or its
subsidiaries

March 2011 Part Number 190-01251-25 Rev. A Printed in Taiwan
© 2011 Garmin Ltd. or its subsidiaries
Garmin International, Inc.
1200 East 151st Street, Olathe, Kansas 66062, USA
Garmin (Europe) Ltd.
Liberty House, Hounsdown Business Park, Southampton, Hampshire, SO40 9LR, UK
Garmin Corporation
No.68, Zhangshu 2nd Rd., Xizhi Dist., New Taipei City 221, Taiwan
www.garmin.com.sg