Magewell XI100XE User manual

http://www.magewell.com
XI100XE Installation Guide
Please check the item list and parts in package to confirm that nothing is
missing
Item List
Item
Number
XI100XE Capture Adapter
1
DB9 to A/V Interface Breakout Cable
1
Low-Profile Baffle
1
Driver Installation CD
1
Installation Guide(the document)
1
Quality Guarantee Specifications
1
Install XI100XE:
1. Power off the computer.
2. Discharge any static electricity build up in your body by touching a large
grounded metal surface or the computers’ case (if plugged in) for few
seconds; or wear an antistatic wrist strap.
3. Put XI100XE capture adapter into the computer PCI-Express slot. The
card can be putted into PCI Express x1, x4 or x16 slot.(Note: the x16 slot
in some motherboard is exclusive use for graphics card, XI100XE may be
not identified correctly)
4. Power on the computer to start the operating system.
5. Cancel the “find new hardware”image that the operating system prompts.

6. Insert the driver CD-ROM and run Autorun.exe in CD-ROM root
directory.
7. Click the installation program and follow prompts to carry on remaining
operations.
8. Run “AmCap.exe”in CD to check whether success after installation.