Magnavox 43MV347X User manual

1 866 341 3738 1 866 341 3738
1 866 341 3738
Owner’s manual
Manual del propietario
Manuel du propriétaire
www.magnavox.com/support/
www.magnavox.com/support/ www.magnavox.com/support/
EN :
ES :
FR :
To obtain a more detailed electronic copy of this manual or much further contents,
go to www.magnavox.com/support/
Pour obtenir une copie electronique plus detaillee de ce manuel ou pour aller encore
plus loin, visitez www.magnavox.com/support/
Para obtener una copia electronica detallada de este manual o mucho mayor contenido,
visite www.magnavox.com/support/
English Español Français
43MV347X

Know these safety symbols
The lightning ash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
apparatus’s enclosure that may be of sufcient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the apparatus.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The caution marking is located on the rear or bottom of the cabinet.
CAUTION
Register online today at www.magnavox.com/support/ today
to get the most benefits from your purchase.
Visit our World Wide Web Site at www.magnavox.com/support/
WARNING: To reduce the risk of re or electric shock, do not expose this apparatus to rain or moisture. Apparatus
shall not be exposed to dripping or splashing and no objects lled with liquids, such as vases, shall be
placed on the apparatus.
CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert.
ATTENTION: Pour éviter les choc électriques,introduire la lame la plus large de la che dans la borne correspondante
de la prise et pousser jusqu’au fond.
Registering your model with MAGNAVOX makes you eligible for all of the valuable benets such as software
upgrades and important product notications.
Register Online at www.magnavox.com/support/
CHILD SAFETY:
CHILD SAFETY:
PROPER TEL
PROPER TELE
VISION P
VISION PLA
CEMENT M
CEMENT MAT
TERS
TERS
THE CONSUMER ELECTRONICS INDUSTRY CARES
THE CONSUMER ELECTRONICS INDUSTRY CARES
•
Manufacturers, retailers and the rest of the
Manufacturers, retailers and the rest of the
consumer electronics industry are committed to
consumer electronics industry are committed to
making home entertainment safe and enjoyable.
making home entertainment safe and enjoyable.
•
As you enjoy your television, please note that all
As you enjoy your television, please note that all
televisions – new and old- must be supported on
televisions – new and old- must be supported on
proper stands or installed according to the
proper stands or installed according to the
manufacturer’s recommendations. Televisions that
manufacturer’s recommendations. Televisions that
are inappropriately situated on dressers, bookcases,
are inappropriately situated on dressers, bookcases,
shelves, desks, speakers, chests, carts, etc., may
shelves, desks, speakers, chests, carts, etc., may
fall over, resulting in injury.
fall over, resulting in injury.
TUNE IN TO SAFETY
TUNE IN TO SAFETY
•
ALWAYS
ALWAYS
follow the manufacturer’s recommendations
follow the manufacturer’s recommendations
for the safe installation of your television.
for the safe installation of your television.
•
ALWAYS
ALWAYS
read and follow all instructions for proper
read and follow all instructions for proper
use of your television.
use of your television.
•
NEVER
NEVER
allow children to climb on or play on the
allow children to climb on or play on the
television or the furniture on which the television is
television or the furniture on which the television is
placed.
placed.
•
NEVER
NEVER
place the television on furniture that can
place the television on furniture that can
easily be used as steps, such as a chest of drawers.
easily be used as steps, such as a chest of drawers.
•
ALWAYS
ALWAYS
install the television where it cannot be
install the television where it cannot be
pushed, pulled over or knocked down.
pushed, pulled over or knocked down.
•
ALWAYS
ALWAYS
route cords and cables connected to the
route cords and cables connected to the
television so that they cannot be tripped over, pulled
television so that they cannot be tripped over, pulled
or grabbed.
or grabbed.
WALL OR CEILING MOUNT YOUR TELEVISION
WALL OR CEILING MOUNT YOUR TELEVISION
•
ALWAYS
ALWAYS
contact your retailer about professional
contact your retailer about professional
installation if you have any doubts about your ability
installation if you have any doubts about your ability
to safely mount your television.
to safely mount your television.
•
ALWAYS
ALWAYS
use a mount that has been recommended
use a mount that has been recommended
by the television manufacturer and has a safety
by the television manufacturer and has a safety
certication by an independent laboratory (such as
certication by an independent laboratory (such as
UL, CSA, ETL).
UL, CSA, ETL).
•
ALWAYS
ALWAYS
follow all instructions supplied by the
follow all instructions supplied by the
television and mount manufacturers.
television and mount manufacturers.
•
ALWAYS
ALWAYS
make sure that the wall or ceiling where you
make sure that the wall or ceiling where you
are mounting the television is appropriate. Some
are mounting the television is appropriate. Some
mounts are not designed to be mounted to walls and
mounts are not designed to be mounted to walls and
ceilings with steel studs or cinder block construction.
ceilings with steel studs or cinder block construction.
If you are unsure, contact a professional installer.
If you are unsure, contact a professional installer.
•
Televisions can be heavy. A minimum of two people
Televisions can be heavy. A minimum of two people
is required for a wall or ceiling mount installation.
is required for a wall or ceiling mount installation.
MOVING AN OLDER TELEVISION TO A NEW PLACE IN
MOVING AN OLDER TELEVISION TO A NEW PLACE IN
YOUR HOME
YOUR HOME
•
Many new television buyers move their older CRT
Many new television buyers move their older CRT
televisions into a secondary room after the purchase
televisions into a secondary room after the purchase
of a at-panel television. Special care should be
of a at-panel television. Special care should be
made in the placement of older CRT televisions.
made in the placement of older CRT televisions.
•
ALWAYS
ALWAYS
place your older CRT television on furniture
place your older CRT television on furniture
that is sturdy and appropriate for its size and weight.
that is sturdy and appropriate for its size and weight.
•
NEVER
NEVER
place your older CRT television on a dresser
place your older CRT television on a dresser
where children may be tempted to use the drawers
where children may be tempted to use the drawers
to climb.
to climb.
•
ALWAYS
ALWAYS
make sure your older CRT television does
make sure your older CRT television does
not hang over the edge of your furniture.
not hang over the edge of your furniture.
CTA.tech/safety
CTA.tech/safety
2

Important safety instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including ampliers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not t into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11. Only use attachments / accessories specied by
the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or
table specied by the manufacturer,
or sold with the apparatus. When a
cart is used, use caution when
moving the cart / apparatus
combination to avoid injury from
tip-over.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualied service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
Note to the CATV system installer:
This reminder is provided to call the CATV system installer’s
attention to Article 820-40 of the NEC that provides guidelines
for proper grounding and, in particular, species that the cable
ground shall be connected to the grounding system of the
building, as close to the point of cable entry as practical.
Example of antenna grounding as per NEC - National
Electric Code
ANTENNA LEAD IN WIRE
GROUND CLAMP
ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC SERVICE EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
POWER SERVICE GROUNDING ELECTRODE
SYSTEM (NEC ART 250, PART H)
GROUND CLAMPS
Wall mount bracket kit
Brand Model # Screw dimension
43MV347X SANUS 25BB M4 x 1.378”
(35mm)
●Your TV meets the VESA standard for wall mounting.
Consult with your local dealer for a wall mount bracket
which is compatible with your TV model.
●The recommended wall mount bracket kit (sold separately)
allows the mounting of the TV on the wall.
●For detailed information on installing the wall mount, refer
to the wall mount Instruction book.
●Funai is not responsible for any damage to the product or
injury to yourself or others if you elect to install the TV wall
mount bracket or mount the TV onto the bracket on your
own.
●The wall mount bracket must be installed by experts.
Funai is not liable for these types of accidents or
injuries noted below.
●Install the wall mount bracket on a sturdy vertical wall.
●If installed onto a ceiling or slanted wall, the TV and wall
mount bracket may fall which could result in a severe
injury.
●Do not use screws that are longer or shorter than their
specified length. If screws too long are used this may
cause mechanical or electrical damage inside the TV set.
If screws too short are used this may cause the TV set to
fall.
●Do not fasten the screws by excessive force. This may
damage the product or cause the product to fall, leading
to an injury.
●For safety reasons use 2 people to mount the TV onto a
wall mounting bracket.
●Do not mount the TV onto the wall mounting bracket while
your TV is plugged in or turned on. It may result in an
electrical shock injury.
When installing the unit on the wall, allow this
much space.
Top :11.8 inches (30cm)
Left and right side :5.9 inches (15cm)
Bottom :3.9 inches (10cm)
3
English

1 Notice
MAGNAVOX and SMART. VERY SMART. are registered
trademarks of Koninklijke Philips N.V. and are used under
license from Koninklijke Philips N.V.
Funai reserves the right to change products at any time
without being obliged to adjust earlier supplies accordingly.
The material in this Owner’s manual is believed adequate for
the intended use of the system. If the product or its individual
modules or procedures are used for purposes other than
those specified herein, confirmation of their validity and
suitability must be obtained. Funai warrants that the material
itself does not infringe any United States patents. No further
warranty is expressed or implied.
Funai cannot be held responsible neither for any errors in the
content of this document nor for any problems as a result of
the content in this document. Errors reported to Funai will be
adapted and published on the Funai support website as soon
as possible.
Pixel characteristics
This LCD product has a high number of color pixels. Although
it has effective pixels of 99.999% or more, black dots or
bright points of light (red, green or blue) may appear
constantly on the screen. This is a structural property of the
display (within common industry standards) and is not a
malfunction.
Warranty
No components are user serviceable. Do not open or remove
covers to the inside of the product. Repairs may only be done
by service centers and official repair shops. Failure to do so
shall void any warranty, stated or implied.
Any operation expressly prohibited in this Owner’s manual,
any adjustments or assembly procedures not recommended
or authorized in this Owner’s manual shall void the warranty.
Federal communications commission notice
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
●
Reorient or relocate the receiving antenna.
●
Increase the separation between the equipment and the receiver.
●
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
●
Consult the dealer or an experienced radio or television technician
for help.
Declaration of conformity
Trade name :MAGNAVOX
Responsible party :FUNAI CORPORATION, Inc.
Model :43MV347X
Address :19900 Van Ness Avenue, Torrance,
CA 90501 U.S.A.
Telephone number :1 866 341 3738
Modifications
This apparatus may generate or use radio frequency energy.
Changes or modifications to this apparatus may cause
harmful interference.
Any modifications to the apparatus must be approved by
Funai.
The user could lose the authority to operate this apparatus
if an unauthorized change or modification is made.
Cables
Connections to this device must be made with shielded
cables with metallic RFI / EMI connector hoods to maintain
compliance with FCC rules and regulations.
Canadian notice
CAN ICES-3 (B)/NMB-3 (B)
Analog and digital television receiving apparatus, Canada
BETS-7 / NTMR-7.
The following FCC/IC RSS applies to the
wireless LAN adapter included in this product.
FCC caution: Any changes or modifications not expressly
approved by the party responsible for compliance could void
the user’s authority to operate this equipment.
This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
Country code statement
For product available in the USA market, only channel 1~11
can be operated. Selection of other channels is not
possible.
To maintain compliance with FCC RF exposure
requirements, use only belt-clips, holsters or similar
accessories that do not contain metallic components in its
assembly. The use of accessories that do not satisfy these
requirements may not comply with FCC RF exposure
requirements and should be avoided.
This device complies with industry Canada license-exempt
RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference and
(2) this device must accept any interference, including
interference that may cause undesired operation of the
device.
4

Positioning the TV
●
Large screen TVs are heavy. 2 people are required to carry and
handle a large screen TV.
●
Make sure to hold the upper and bottom
frames of the unit firmly as illustrated.
●
Install the unit in a horizontal and stable
position.
●
Do not install the unit in direct sunlight or in
a place subject to dust or strong vibration.
●
Depending on the environment, the
temperature of this unit may increase
slightly. This is not a malfunction.
●
When installing this unit in a temperate environment, avoid a place
with rapid temperature changes.
●
This unit should not be used in a tropical environment as it has not
been evaluated under such conditions.
●
No objects should be placed directly on or under this unit, especially
lighted candles or other flaming objects.
●
Depending on your external devices, noise or disturbance of the
picture and / or sound may be generated if the unit is placed too
close to them. In this case, please ensure enough space between
the external devices and the unit.
●
Do not insert the AC power cord into the power socket outlet before
all the connections are made.
●
Ensure that you always have easy access to the AC power cord and
outlet to disconnect the TV from the AC outlet.
●
Before you move the TV, disconnect attached cables to prevent
damage to connectors, especially the TV tuner.
●
Be sure to unplug the AC power plug from the AC outlet before
moving or carrying the unit.
●
When moving the TV and then setting it down, please be careful not
to pinch the AC power cord under the unit.
Regulatory notices
WARNING :To prevent injury, this apparatus must be securely
attached to the furniture / wall in accordance with the
instructions. Tipping, shaking or rocking the unit may
cause injury / death.
WARNING :Never place a TV in an unstable location. A TV may
fall, causing serious personal injury or death. Many
injuries, particularly to children, can be avoided by
taking simple precautions such as:
–
Using cabinets or stands recommended by the
manufacturer of the TV.
–
Only using furniture that can safely support the TV.
–
Ensuring the TV is not overhanging the edge of the
supporting furniture.
–
Not placing the TV on tall furniture (for example,
cupboards or bookcases) without anchoring both
the furniture and the TV to a suitable support.
–
Not placing the TV on cloth or other materials that
may be located between the TV and supporting
furniture.
–
Educating the children about the dangers of
climbing on furniture to reach the TV or its controls.
If your existing TV is being retained and relocated, the same considerations
as above should be applied.
Do not place the unit on the furniture that is capable of being
tilted by a child and an adult leaning, pulling, standing or
climbing on it. A falling unit can cause serious injury or even
death.
In order to avoid interruption of ventilation, this unit should
not be placed in built-in equipment such as a book cabinet,
rack, etc., and the vents of this unit should not be covered
with anything such as a tablecloth, curtain, newspaper, etc.
Make sure that there is enough ventilation space (4 inches /
10 cm or more) around this unit.
Press B to turn the unit on and go into standby mode. To
completely turn off the unit, you must unplug the AC power
plug from the AC power outlet.
Disconnect the AC power plug to shut the unit off when
trouble is found or not in use. The AC plug shall remain readily
available.
AC power plug
Never use a gas duster on this TV.
The gas trapped inside of this unit may cause ignition and
explosion.
Environmental care
The packaging of this product is intended to be recycled.
Contact your local authorities for information about how to
recycle the packaging.
For product recycling information, please visit -
www.magnavox.com
Click on
End of life directives
Magnavox pays a lot of attention to produce environmental-
friendly products in green focal areas. Your new TV contains
materials which can be recycled and reused. At the end of
its life, specialized companies can dismantle the discarded
TV to concentrate the reusable materials and to minimize the
amount of materials to be disposed of. Please ensure you
dispose of your old TV according to local regulations.
#Batteries usage
CAUTION :Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
WARNING :Batteries (battery pack or battery installed) should not
be exposed to excessive heat such as sunshine, fire
or the like.
●
Do not mix old and new batteries.
●
Do not mix alkaline, standard (carbon-zinc) or rechargeable (ni-cad,
ni-mh, Li-ion, etc.) batteries.
Disposal of used batteries
The batteries supplied do not contain the heavy metals
mercury and cadmium, however in certain localities,
disposing batteries with household waste is not permitted.
Please ensure you dispose of batteries according to local
regulations.
5
English

Downloading an Owner’s manual
To obtain a more detailed electronic copy of this manual:
1
Point your browser to :
http://www.magnavox.com/support/download
2
Enter the model number in the “Type the Model
Number...” field.
3
Click the desired manual to be downloaded.
Preparing to move / ship the unit
Please pack the unit properly by following the diagram on the
carton (as noted below).
●
To avoid damage to the screen, do not pack the stand on the same
side as the TV screen, refer to the illustration above.
●
Refer to the Quick start guide for instructions on how to Mount base
onto TV.
Copyright
All other registered and unregistered trademarks are the
property of their respective owners.
The terms HDMI and HDMI
High-Definition Multimedia
Interface, and the HDMI Logo
are trademarks or registered
trademarks of HDMI Licensing
LLC in the United States and
other countries.
Dolby, Dolby Audio, and the
double-D symbol are
trademarks of Dolby
Laboratories.
Sonic Emotion and the Sonic
Emotion logo symbol are
registered trademarks of sonic
emotion ag.
Netflix is available in certain
countries. Streaming
membership required. More
information at www.netflix.com.
VUDUTM is a trademark of
VUDU, Inc.
YouTube and the YouTube logo
are trademarks of Google Inc.
PANDORA, the PANDORA logo,
and the Pandora trade dress
are trademarks or registered
trademarks of Pandora Media,
Inc. Used with permission.
Hotlist, Samba, Samba TV and
associated logos are
trademarks of Free Stream
Media Corp.
Portions of this software are copyright © The FreeType Project
(www.freetype.org).
The American Academy of Pediatrics discourages television
viewing for children younger than two years of age.
© 2017 Funai Electric Co., Ltd. All rights reserved.
No part of this Owner’s manual may be reproduced,
transmitted, disseminated or transcribed, in any form or for
any purpose without the express prior written consent of
Funai. Furthermore, any unauthorized commercial
distribution of this Owner’s manual or any revision hereto is
strictly prohibited.
6

Contents
1 Notice ................................................. 4
2 Getting started .................................. 7
Connecting antenna or Cable / Satellite /
IPTV set-top box 7
3 Use your TV ........................................ 8
Watching channels from an external device 8
Displaying setup using Home menu 8
Network 8
Home network 9
Apps 9
Changing picture and sound settings 10
Changing Picture format 11
Caption settings 12
Child and ratings lock 12
Channel lock 13
Setting your location to home 13
Voice guide 13
Viewing photos, playing music and watching
videos on a USB memory stick 14
4 Install channels ............................... 14
Reinstall channels 14
5 Troubleshooting tips ....................... 15
6 Specifications .................................. 16
7 Warranty .......................................... 17
License .......................................... end of book
2 Getting started
Connecting antenna or Cable /
Satellite / IPTV set-top box
Be sure your antenna or another device is connected
properly before plugging in the AC power cord.
If connecting to an antenna through an RF cable
Any DTV programs that are broadcast in your area can
be received for free through an antenna connection.
IN
IN
IN
OUT
OUT
OUT
RF cable
RF cable
RF cable
Antenna
Antenna
Antenna
Cable
Cable
Cable
If connecting Cable / Satellite / IPTV set-top box
using an HDMI cable
If the TV is connected to a cable / satellite set-top box
via an HDMI cable, make sure you select the correct
source by using SOURCE button on TV or remote
control.
IN
IN
IN
IN
OUT
Set-top box
RF cable
HDMI cable
HDMI cable
HDMI cable
Connecting Cable / Satellite / IPTV set-top
box, Blu-ray disc / DVD recorder via
composite connectors and analog audio
Do not place your recorder too close to the screen
because some recorders can be susceptible to harmful
interference from the TV.
Cable
OUT
RF cable
IN
IN
IN
OUT
IN
OUT
IN
IN
IN
OUTOUT
RF cable IN
Satellite
IN
Cable
Set-top box
Video +
Audio(L/R) cables
Video + Audio(L/R)
cables
Video + Audio(L/R)
cables
Video + Audio(L/R)
cables
Blu-ray disc / DVD recorder
ONote(s)
●If there is no input signal and no operation for 15 minutes,
the unit will go into standby mode automatically.
7
English

3 Use your TV
Watching channels from an external
device
1Turn on the set-top box or the connected device.
●The picture from the set-top box or the connected device
might appear automatically on the TV screen.
If the picture does not appear
2Press SOURCE and use J Kto select the set-top
box or the connected device, then press OK.
3Use the remote control for the set-top box or the
connected device to select channels to view.
Displaying setup using Home menu
1Press Qto display Home menu.
SetupSource Home Network Apps
Watch TV
2Use J Kto select Setup, then press OK.
Guide to Home menu screen
Home menu start screen
SetupSource Home Network Apps
Watch TV
a TV :Select RF input to view TV Off-the-Air signals.
b Source :Select connected devices including TV Off-the-
Air signals.
c Home Network :Accesses Home network menus.
d Apps :Accesses Apps menus.
e Setup :Accesses menus that allow you to change
picture, sound and other TV settings.
●
Please read the detailed version of this Owner’s manual on
www.magnavox.com/support/ for more information on menu
features.
Network
Setup network connection settings in order to use
Apps or network upgrade functions.
1Display Setup using Home menu and use J Kto
select Connect to network, then press OK.
Connect to network
Before you proceed to Connection test or other settings in
Network section, run the network settings assistant to
connect the TV to your network.
Wireless setting
Select to use a wireless LAN to connect to the internet by a
wireless connection.
2
Use H I to select Wireless, then press OK.
3
Use J K to select the desired setting, then press OK,
and follow the On-screen instructions.
Setting items Description
Simple Connect
Select this setting if your router has an easy
connect feature. On your router, press the
easy connect button.
If connection test fails, refer to the router’s
manual for more details.
Scan Search for wireless networks automatically
and select the wireless network name (SSID)
from the list.
Manual entry
Set up the connection to the wireless LAN
Access Point (AP) (e.g. wireless router)
manually by entering the wireless network
name (SSID).
ONote(s)
●Download the Web Owner’s manual on the http://
www.magnavox.com/support/download website to read the
procedure on how to use the software keyboard to enter the
security key for the Manual entry procedure.
Wired setting
Select to use an Ethernet cable to connect to the internet by
a wired connection. Please purchase shielded Ethernet
cables at your local store and use it when you connect to
network equipment.
2
Use H I to select Wired, then press OK.
●
Connection test will start automatically. (Refer to Connection
test Lp. 8.)
Connection test
Perform the following steps to test your internet connection
after you have connected an Ethernet cable or entered
network settings such as IP address, DNS settings, etc.
manually.
1
Display Setup using Home menu and use H I J K to
select Network settings, then press OK.
2
Use H I to select Connection test, then press OK.
●
Connection test will start automatically and the test result for
home network and internet will appear right after the
connection test finishes.
●
“Testing…” is displayed while the connection test is in
progress.
8Continued on next page.

Home
network Internet Description
Pass Pass Connection test is successfully
completed.
Fail -Connection test for home network
failed. Check the connection settings.
Pass Fail Connection test for internet failed.
Check the connection settings.
●
If the connection test for internet passes, speed test will start
automatically.
3
Press OK to go to the list on network status confirmation
screen.
For wireless connection
192, 168, 1, 1
255, 255, 255, 0
192, 168, 1, 254
0, 0, 0, 0
0, 0, 0, 0
AP Name
Back
SSID
Secondary DNS
Primary DNS
Default gateway
Subnet mask
IP address
Network connection test
Authentication Done
For wired connection
192, 168, 1, 1
255, 255, 255, 0
192, 168, 1, 254
0, 0, 0, 0
0, 0, 0, 0
Back
Secondary DNS
Primary DNS
Default gateway
Subnet mask
IP address
Network connection test
ONote(s)
●If the connection test for both home network and internet pass,
you are ready to use Apps or network upgrade functions using
the internet without making any additional settings.
●If the connection test fails, check if the Ethernet cable is
connected to this TV properly or if you have entered all the
required details for the wireless LAN connection properly.
Home network
You can turn your TV into a Digital Media Renderer (DMR), which
can play video, music and photo files stored on certified home
media servers connected to your home network.
1
Press Q and use J K to select Setup, then press OK.
2
Use H I J K to select Network settings, then press OK.
3
Use H I to select Home network, then press OK.
4
Use H I J K to select the item you want to adjust, then
press OK.
Renderer
Off Disable DMR.
On Enable this unit to play files using
DMC.
Renderer name Change the display name of this TV to other
devices on the home network.
Apps
Apps offers internet services for your TV. Use the TV
remote control to browse the App's pages. You can
play movies, listen to music and much more, all on
your TV screen.
–Because Apps is an online system, it can be modified over
time to better serve its purpose.
–Some Apps services can be added, changed or stopped after
some time.
–You cannot download and save files or install plug-ins.
Before using Apps
Follow the procedure below before using Apps.
1Connect this unit to the internet.
2Set up the necessary network connection settings.
(Refer to Network Lp. 8.)
Using Apps
1Press Qto display Home menu.
2Use J Kto select Apps, then press OK.
●Apps screen will appear, then use H I J Kto select
service icon.
●For the first time only, Terms of Use screen will appear.
After confirming the content, use H Ito select Agree,
then press OK.
Guide to Apps menu screen
Apps start screen
OPTIONS
Country: USA
Terms of Use
APP4APP3
APP2APP1
Featured AppsNow on TV
Apps
Option
4
3
21
65
aNow on TV :Displays the image of the input
under present tuning.
bFeatured Apps :Displays fixed net service icons.
cSelected Apps :Displays movable net service
icons.
dCountry :Selects what country you live in.
eTerms of Use :Displays a copy of net service.
fOptions :Remove or move App.
Information on network services
For detailed information on 3rd party internet services,
please visit the service providers website:
Netflix :http://www.netflix.com
VUDU :http://www.vudu.com
For additional help, refer to the Frequently Asked
Questions FAQs at www.magnavox.com.
Select TV and enter your model number.
9Continued on next page.
English

Changing picture and sound settings
You must set Home in Location. Lp. 13
Otherwise, personalized picture and sound settings
will not be memorized after the unit goes into standby
mode.
Changing picture settings
1
Press Q and use J K to select Setup, then press OK.
2
Use H I J K to select TV settings, then press OK.
3
Use H I to select Picture, then press OK.
Mode selection
Advanced settings
Sharpness
Tint
Color
Clear Pix X2
Brightness
Contrast
Backlight
Auto picture
Picture format
Accessibility
Installation
Features
Sound
Picture
Horizontal position
4
Use H I to select the item you want to adjust, then
press OK.
Auto picture To select the desired setting, then press OK
(Personal, Standard, Natural, Vivid, Sports, Movie,
Game, Energy saving and Internet video)
Cursor I Cursor H
Backlight To reduce power
consumption and
brightness
To increase power
consumption and
brightness
Contrast To decrease contrast To increase contrast
Brightness To decrease
brightness To increase brightness
Color To decrease color
intensity To increase color intensity
Tint To add green To add red
Sharpness To soften To sharpen
Clear Pix X2
Enters sub-menus to adjust the following settings:
(Dynamic contrast, Color enhancement, Black
stretch, BMR 120, Macro Dimming, Noise
reduction and MPEG artifact reduction)
Advanced settings Enters sub-menus to adjust the following settings: (Color alignment, Custom color management,
Gamma and Film mode)
Picture format
Automatic
Changing Picture
format Lp. 11
Super zoom
4:3
Movie expand 14:9
Movie expand 16:9
Wide screen
Unscaled
Mode selection
PC
To turn off image
enhancement features
which makes the TV to
act purely as a monitor
HDTV
To enable image
enhancement features
to improve picture
quality
Cursor I Cursor H
Horizontal position To move PC screen left To move PC screen
right
Vertical position To move PC screen
down To move PC screen up
Changing sound settings
1
Press Q and use J K to select Setup, then press OK.
2
Use H I J K to select TV settings, then press OK.
3
Use H I to select Sound, then press OK.
Delta volume
Digital output format
Headphone volume
TV speakers
Auto volume leveling
Sonic Emotion Premium
Balance
Equalizer
Auto sound
Installation
Features
Sound
Picture
Accessibility
4
Use H I to select the item you want to adjust, then
press OK.
●
The following sound settings can be configured. Depending on
the sound source, some sound settings are not available.
Auto sound
To select the desired setting, then press OK
(Personal, Standard, Vivid, Sports, Movie,
Music and News)
Equalizer
To select the specific frequency using J K ,
and use H I to adjust the level, then press
OK
Balance Adjusts the balance of the right and left
speakers to best suit your listening position
Sonic
Emotion
Premium
Sonic
Emotion
Off To set Sonic Emotion to off
On To set Sonic Emotion to on
Dialog
Enhancement
Off To set Dialog Enhancement to
off
On To set Dialog Enhancement to
on
Bass
Enhancement
Off To set Bass Enhancement to off
On To set Bass Enhancement to on
Absolute
3D Sound
Off To set Absolute 3D Sound to off
On To set Absolute 3D Sound to on
Auto volume leveling
Off To remove the Auto volume
leveling
On To reduce volume differences
between the TV commercials
and the programs
10 Continued on next page.

TV speakers
Off No output sound from the unit’s
speakers
On To output sound from the unit’s
speakers
CEC Link To control audio output from
your connected HDMI link
devices
Headphone volume Adjusts headphone volume
Digital output format
PCM To output PCM format
Multichannel
To output multichannel signals
(When the audio of the content
is PCM, it will be output in PCM
even if Multichannel is
selected.)
Delta
volume
If a
channel
or input
device
is...
Too loud
Navigate to that channel or input
device and set a negative delta
volume level as per your
personal preferences.
Too soft
Navigate to that channel or input
device and set a positive delta
volume level as per your
personal preferences.
Changing Picture format
Display modes can be selected when your TV receives
a
16:9 or 4:3 video signal.
Three types of display modes can be selected for a PC input
signal.
Press PICTURE SIZE Arepeatedly to switch the TV
aspect ratio.
For 16:9 video signal
Wide screen
4:3Automatic
Full
Automatic
Other than DTV and HDMI connected
devices, enlarges the picture to best fit the
screen. DTV and HDMI connected devices
display the picture at its original size.
The subtitles may remain visible.
4:3 Displays a 16:9 picture at a 4:3 size; the
picture is shortened horizontally. Sidebars
appear on both edges of the screen.
Wide screen Displays a 16:9 picture that is stretched
horizontally and vertically.
Full
Displays a scaled 16:9 picture. Bars appear
on both the upper and lower portions of the
screen depending on the type of video
signal.
For 4:3 video signal
Wide screen Movie expand 16:9 Movie expand 14:9
4:3Super zoomAutomatic
Automatic
Other than DTV and HDMI connected devices,
enlarges the picture to best fit the screen.
DTV and HDMI connected devices display the
picture at its original size. The subtitles may
remain visible.
Super zoom
Displays a 4:3 picture at a 16:9 size; the
picture is stretched horizontally and vertically
and its left and right edges are enlarged. This
crops out some of the top and bottom of the
picture.
4:3 Displays a 4:3 picture at its original size.
Sidebars appear on both edges of the screen.
Movie expand
14:9
Displays a 4:3 picture at a 14:9 size; the
picture is stretched horizontally and vertically.
This crops out some of the top and bottom of
the picture. Sidebars appear on both edges of
the screen.
Movie expand
16:9
Displays a 4:3 picture at a 16:9 size; the
picture is stretched horizontally and vertically.
This crops out some of the top and bottom of
the picture.
Wide screen Displays a picture that is stretched out of
proportion to fill the screen.
For PC input signal
UnscaledWide screen4:3
●This unit can also be connected to your PC that has a DVI
terminal.
Use an HDMI-DVI conversion cable for this video connection
and it requires stereo mini 3.5mm plug audio cable for
analog audio signal as well.
●Refer to 16:9 video signal on this page if the PC has HDMI
output.
4:3 Displays a proportionately stretched picture.
Sidebars appear on both edges of the screen.
Wide screen Displays a picture that is stretched out of
proportion to fill the screen.
Unscaled Displays a picture in its original size.
If the signal source has side or top-bottom bars
inserted into the picture, the Picture format function
will not eliminate them.
11 Continued on next page.
English

Caption settings
Closed captions displays the audio portion of the program
as superimposed text over the video.
1
Press Q and use J K to select Setup, then press OK.
2
Use H I J K to select TV settings, then press OK.
3
Use H I to select Accessibility, then press OK.
4
Use H I to select Caption settings, then press OK.
Closed captions
You can choose the closed caption display.
5
Use H I to select Closed captions, then press OK.
6
Use H I to select On, Off or CC w/ mute, then press
OK.
Cable / NTSC (Analog) TV operation
Caption service
5
Use H I to select Caption service, then press OK.
6
Use H I to select the desired Caption service, then
press OK.
CC-1 and
T-1
The primary closed captions and text services. The
closed captions or text is displayed in the same
language as the program’s dialog (up to 4 lines of script
on the TV screen).
CC-3 and
T-3 Serve as the preferred data channels. The closed
captions or text is often a secondary language.
CC-2, CC-4,
T-2 and T-4
Rarely available and broadcasters use them only in
special conditions, such as when CC-1 and CC-3 or T-1
and T-3 are not available.
●There are 3 display modes according to programs:
Paint-on Displays characters on the TV screen
immediately.
Pop-on Once characters are stored in memory,
they are displayed all at once.
Roll-up Displays the characters continuously by
scrolling (max. 4 lines).
Digital TV operation
Digital caption service
5
Use H I to select Digital caption service, then press
OK.
6
Use H I to select the desired Digital caption service,
then press OK.
CS-1 to
CS-6
Select one of these before changing any other item in
Caption settings menu. Choose CS-1 under normal
conditions.
Digital caption options
You can choose the size, font, color, background and other
characteristics for the captioned text.
5
Use H I to select Digital caption options, then press
OK.
6
Use H I to select an item and press OK, then use H
I to Select the desired Setting and press OK.
ONote(s)
●
Closed captions service may not be controlled by this unit’s
menu options if you are watching television through a set-top
box. In which case you will need to use the menu options on
the external set-top box to control closed captions.
●The captions do not always use correct spelling and grammar.
Not all TV programs and product commercials include closed
captions information. Refer to your area TV program listings for
the TV channels and times of closed captions shows. The closed
captions programs are usually noted in the TV listings with a
service mark such as CC.
●Not all closed captions services are used by a TV broadcaster
during the transmission of a closed caption program.
●The EUT (Equipment Under Test) setting that satisfies
§ 79.102 (e) is as follows:
–Font: Mono-font
–Character size: Large
Child and ratings lock
You can prevent your children from watching certain
programs or certain channels by locking the TV controls and
by using ratings.
1
Press Q and use J K to select Setup, then press OK.
2
Use H I J K to select Channel settings, then press
OK.
3
Use H I to select Child lock, then press OK.
4
Use the NUMBER buttons to enter the 4-digit numbers
for your PIN code.
●
When you have not set up your PIN code, enter 0, 0, 0, 0.
●
When the PIN code is correct, Child lock menu is displayed.
Setting TV and movie ratings
TV ratings lock has controlled access to individual programs
based on their age and content rating. Movie ratings lock is
the rating system created by MPAA.
5
Use H I to select TV ratings lock or Movie ratings lock,
then press OK.
6
Use H I to select the desired rating, then press OK
repeatedly to switch between block and view.
●
For US TV ratings, you can further set the sub ratings to block
specific elements within programs.
●G
or F indicates that the rating is locked (Blocked).
●E
indicates that the rating is not locked (Viewable).
Movie
ratings TV ratings Description
All All ratings locked including no rating
NR None No rating
–TV-Y Appropriate for all children
–TV-Y7 Appropriate for all children 7 and older
G TV-G General audience
PG TV-PG Parental guidance suggested
PG-13 – Unsuitable for children under 13
–TV-14 Unsuitable for children under 14
R–Restricted under 17 requires
accompanying parent or adult guardian
NC-17 – No one under 17 admitted
X TV-MA Mature audience only
12 Continued on next page.

Canadian English or Canadian French ratings
You can select the rating for Canadian English or Canadian
French broadcasting.
5
Use H I to select Canadian English rating or Canadian
French rating, then press OK.
6
Use H I to select the desired rating, then press OK
repeatedly to switch between block and view.
●G
indicates that the rating is locked (Blocked).
●E
indicates that the rating is not locked (Viewable).
Canadian
English
rating
Canadian
French rating Description
All Locked all ratings
EExempt program
C– For all children
C8+ – For all children 8 and older
GGeneral audience
–8 ans+ Unsuitable for ages under 8
PG – Parental guidance suggested
–13 ans+ Unsuitable for ages under 13
14+ – Unsuitable for ages under 14
–16 ans+ Unsuitable for ages under 16
18+ 18 ans+ Adult audience only
ONote(s)
●The V-Chip can block non rated programs as per “CEA-608-E sec.
L.3”. If the option to block NR, None or Eprograms are used in
Movie ratings lock, TV ratings lock, Canadian English rating or
Canadian French rating accordingly “unusual results may occur
and the unit may not receive emergency bulletins or other types
of programming”: / Emergency bulletins (Such as EAS
messages, weather warnings and others) / Locally originated
programming / News / Political / Public service
announcements / Religious / Sports / Weather.
Channel lock
Set it to restrict access on particular channels.
1Press OK while viewing a TV program.
●Channel list will be displayed.
2Use H I J Kto select a channel, then press red
key.
3Use the NUMBER buttons to enter the 4-digit
numbers for your child lock code.
●The channel will be marked with icon.
●To unlock channels, select a channel to unlock at step
2.
Set it to restrict access on external inputs.
1Press SOURCE and use J Kto select an input.
2Press OPTIONS and use H Ito select Lock or
Unlock, then press OK.
3Use the NUMBER buttons to enter the 4-digit
numbers for your child lock code.
Setting your location to home
You can set the Location on your TV to Home or
Retail. Choosing Home gives you full flexibility to
change predefined settings for picture and sound.
1Press Qand use J Kto select Setup, then press
OK.
2Use H I J Kto select TV settings, then press
OK.
3Use H Ito select Installation, then press OK.
Installation
Features
Sound
Picture
Restore default settings
Preferences
Language
Accessibility
4Use H Ito select Preferences, then press OK.
5Use H Ito select Location, then press OK.
6Use H Ito select Home, then press OK.
ONote(s)
●You must set Home in the menu. Otherwise, personalized
picture and sound settings will not be memorized after the
unit goes into standby mode.
Voice guide
Lets you configure voice guide and its settings.
1Press Qand use J Kto select Setup, then press
OK.
2Use H I J Kto select TV settings, then press
OK.
3Use H Ito select Accessibility, then press OK.
4Use H Ito select Voice guide, then press OK.
Voice guide
toggle
Off To set Voice guide off
On To set Voice guide on
Speed
Fast Set voice guide speed
based on your preference
Normal
Slow
Pitch
High Set voice guide pitch based
on your preference
Normal
Low
Verbosity Verbose Set voice guide explanation
verbosity based on your
preference
Succinct
Volume level
Loud Set voice guide volume
based on your preference
Normal
Soft
13 Continued on next page.
English

Viewing photos, playing music and
watching videos on a USB memory
stick
Your TV is fitted with a USB connection that enables
you to view photos, listen to music or watch video files
stored on a USB memory stick.
1Press SOURCE and use J Kto select USB, then
press OK.
2Use H I J Kto select the desired file, then press
OK.
Sample picture.jpg
folder_A folder_B folder_C folder_D folder_E
Photo
Photo
●These recorded files must meet specifications shown
below:
Picture (JPEG / Progressive JPEG)
JPEG Upper limit 4000x4000 pixels
Progressive JPEG Upper limit 1024x768 pixels
Music (MP3 / WAV / AAC)
MP3 Sampling frequency 16 kHz - 48 kHz
Constant bit rate 8 kbps - 320 kbps
WAV
Sampling frequency 8 kHz - 48 kHz
Constant bit rate 64 kbps - 1.5
Mbps
AAC Sampling frequency 8 kHz - 48 kHz
Constant bit rate -
Video (MPEG / VOB / AVI / MP4)
Maximum
video H.264, H.265/HEVC, MPEG:
1920x1080@60fps
Extension .avi
.mpg,
.mpeg
.ts,
.trp,
.tp .vob .
mp4 . mkv
Video codec
Audio codec
MPEG1,
MPEG2,
MPEG4,
H.264
MPEG1,
MPEG2,
MPEG4
MPEG1,
MPEG2,
H.264,
H.265/
HEVC
MPEG1,
MPEG2
MPEG1,
MPEG2,
MPEG4,
H.264,
H.265/
HEVC
MPEG1,
MPEG2,
MPEG4,
H.264,
H.265/
HEVC
Dolby Digital YES YES YES YES YES YES
MPEG1/2
audio
layer1/2/3 YES YES YES YES NO YES
LPCM YES YES YES YES YES YES
AAC-LC YES YES YES YES YES YES
ONote(s)
●This unit accepts USB memory stick only. Other storage
devices such as external HDD by USB bus power will not
work.
●Do not use an extension cord and/or USB hub to connect
devices to this unit. Always directly insert the USB flash
memory stick to this unit directly.
●We cannot be held responsible if your USB memory stick
is not supported, nor will we accept any liability for damage
or loss of stored data.
●The USB memory stick is not supplied with this TV.
●A maximum of 1,023 folders or files can be recognized.
●A file name exceeding 256 characters or contains a dot
character is not supported on this TV.
●A USB memory stick that required its own driver or the
device with a special system such as fingerprint
recognition are not supported.
●Be sure to keep a backup copy of the original files on your
USB device before you play them back on this unit. We
have no responsibilities for damage or loss of your USB
stored data.
●To avoid damaging the USB memory stick and the unit
always turn off the unit before you remove the USB
memory stick.
●This unit is not allowed to use the USB memory stick which
requires external power supply (500 mA or more).
●This unit does not support MTP (Media Transfer Protocol)
or the file other than FAT16 and FAT32 file system. If the
file is not supported, an error message appears.
●When the unit does not recognize the USB memory stick,
try reconnecting it.
●Playing the files recorded with high bit rates, the images
can be interrupted in some occasions.
●This unit does not support external subtitles.
●This unit cannot play back a file which goes over the limit
of file restriction limit.
4 Install channels
Reinstall channels
Be sure the RF cable is correctly connected to this unit
and you are registered with your cable TV provider when
you install cable channels.
1
Press Q and use J K to select Setup, then press
OK.
2
Use H I J K to select Search for channels, then
press OK.
3
Use J K to select Start, then press OK.
4
Use H I to select Antenna or Cable, then press OK.
5
Select Start, then press OK.
●
Channel search will start automatically.
0
0
12 3 4
Stop
Total progress:
Analog channels found:
Digital channels found:
to complete.
take more than 20 minutes
Auto programming may
wait...
System searching. Please
6
Press OK on Finish to complete.
14

5 Troubleshooting tips
If the unit does not perform properly when operated as instructed in this manual,
Please check the following Troubleshooting tips and all connections once before calling for service.
Power
No power
●
Make sure that the AC outlet supplies the proper voltage, plug
another electrical appliance into the AC outlet to ensure that the
AC outlet operates normally.
●
If a power failure occurs, unplug the AC power cord for 1 minute to
allow the unit to reset itself.
Remote
Remote control buttons or remote itself does not work.
●
Re-insert or replace the AAA batteries with their polarities (+/–) as
indicated on the remote control battery area.
●
When there is an infrared-equipped device near this unit, it may
interrupt the remote control signal from this unit.
●
Make sure that nothing is blocking the unit's remote control sensor
and the remote control is pointed at this remote control sensor.
●
Press and hold any key on remote control toward a digital or cell phone
camera. The remote control is working if you confirm a flashing infrared
light through the camera. Some dual camera cell phones may have an
IR filter in one or both of the cell phone cameras.
Universal remote control does not work properly.
●
Refer to the Owner’s manual of the universal remote control for the
MAGNAVOX code.
Picture
Power is on but no screen image.
●
Check whether the connection for the antenna, cable or set-top box
is connected correctly.
●
Check whether all the cables to the unit are connected to the correct output
jack on your separate device like Blu-ray disc / DVD recorder.
●
Check if your computer is NOT in sleep mode when the input mode
on this unit is in PC mode. Tap any key on the computer keyboard
to wake it up.
●
Check if the correct input mode is selected by pressing SOURCE.
No color
●
Adjust Color in Picture settings. Lp. 10
Picture poor, sound OK
●
Electrical interference from nearby appliances may affect picture
quality.
●
Adjust Contrast and Brightness in Picture settings. Lp. 10
●
For the best picture quality, watch “High Definition” wide screen
programs. If the HD content is not available, watch “Standard
Definition” programs instead.
You see noise or trash on the screen.
●
When the capabilities on the unit exceed the capabilities of the
digital broadcasting, the signal will be increased to match the
capabilities of the display on the unit. This may cause noise or
trash.
Unusual picture appears and the TV does not operate.
●
Press the power button first. If it does not solve, follow the
procedure below.
① Press the buttons on the remote control in the order shown below.
K L H L I L B
② Unplug the AC power cord, then wait for 1 minute, and then plug it
in again.
Picture & Sound
No picture or sound
●
View other TV channels. The problem might be limited to the
broadcasting station or weak signal strength.
●
Unplug the AC power cord and wait for about 1 minute, then plug
the AC power cord and turn on the unit again.
●
Autoprogram must be completed when you set up the unit for the
first time or move it to a location where previously unavailable
channels are broadcast.
●
The selected channel cannot be viewed by the Child and ratings
lock setting. Lp. 12
●
The unit requires some kind of input signal. A digital indoor antenna
(VHF / UHF), a digital external antenna (VHF / UHF) or an RF coaxial
cable from your wall or set-top box signal (HDMI, Component+Audio
or Composite [Video+Audio]) needs to be connected to the unit.
Adjusted picture or sound settings are not effective every time the unit
is turned on.
●
You must set to Home in Location. Lp. 13 (Otherwise, the
settings you adjusted will not be memorized after the unit goes into
standby mode.)
You see a distorted picture or hear an unusual sound.
●
You may be getting NTSC (Analog) TV signal (not HDTV signal)
interference from electrical appliances, automobiles, motorcycles
or fluorescent lights.
●
Try moving the unit to another location to see if this is the cause
of the problem.
Sound
No sound, distorted sound or incorrect audio sound is heard when
using the HDMI-DVI connections.
●
Make sure that the analog audio signals from the HDMI-DVI device
are connected to the analog audio input L/R jacks.
Sound poor, picture OK
●
Check if the audio cable is connected into the unit correctly.
You switch to a different input and the volume changes.
●
This unit will memorize the volume level from the last time you
adjusted it.
●
If the volume of the sound from another device is higher or lower,
then the loudness will change.
Child and rating lock
Forgotten PIN code.
●
Enter “0711” to clear your password.
Screen
You switch to a different input and the screen size changes.
●
This unit will memorize the viewing mode from the last time you
used those particular input modes.
The display image does not cover the entire screen.
●
If you are using the unit as a PC monitor, make sure that Horizontal
position and Vertical position in PC settings are set correctly.
●
If you are watching TV or using the Composite video, Component
video or HDMI with 480i input, press PICTURE SIZE A repeatedly
to switch to various screen modes.
Closed captions
Closed captions are displayed as a white box. No closed captions are
displayed in the closed captions-supported program.
●
Interference from buildings or weather conditions may cause
closed captions to be incomplete if watching analog TV signals.
●
Broadcasting station may shorten the program to insert
advertisements.
●
The closed captions decoder cannot read the information of a
shortened program.
●
Closed captions that are delayed a few seconds behind the actual
dialog are common for live broadcasts. Most captioning production
companies can display a dialog to maximum of 220 words per minute.
If a dialog exceeds that rate, selective editing is used to insure that
the closed captions remain up-to date with the current TV screen dialog.
Black box is displayed on the TV screen.
●
The text mode is selected. For closed captions, select CC-1, CC-2,
CC-3 or CC-4.
Network
Cannot connect to the network.
●
Check if the Ethernet cable connection is properly made. Turn on
the broadband router and/or modem.
●
Check the network settings.
●
Check if the broadband router and/or modem is correctly
connected.
ONote(s)
●The LCD screen is manufactured to provide many years of useful
life. Occasionally a few non active pixels may appear as a fixed
point of blue, green or red.
This is not to be considered a defect in the LCD screen.
●Some functions are not available in specific modes, but this is
not a malfunction. Read the description in this manual for more
details on correct operations.
15
English

6 Specifications
Model # 43MV347X
Picture
Type
Aspect ratio 16:9
Viewing angles 178° (V) by 178° (H)
Built-in digital / Analog tuner ATSC (Digital) / NTSC (Analog)
Sound
Mono / Stereo Mono, Stereo, Sonic Emotion Premium
Power output (RMS watts)
Equalizer 5 Band
Ease of use
Picture format
SD (4:3 source) : Automatic / Super zoom / 4:3 / Movie expand 14:9 / Movie expand 16:9 / Wide screen
HD
(16:9 source) : Automatic / 4:3 / Wide screen / Full
Photo slide show JPEG, Progressive JPEG
Music playback MP3, WAV, AAC
Video playback MPEG1, MPEG2, H.264, MPEG4, H.265/HEVC
Channel
Channel coverage
Over-the-Air DTV
(ATSC)
: VHF: 2∼13
UHF: 14∼69 (Each channel may have e.g. 2.1∼2.9, 3.1∼3.9, etc)
Over-the-Air Analog
(NTSC)
: VHF: 2∼13
UHF: 14∼69
CATV (Analog NTSC) 2∼13, A∼W
W+1∼W+94 (Analog W+1∼W+84), A-5∼A-1, 5A
Tuning system Channel frequency synthesized tuning system
Channel access Direct access number keyboard, Programmable scan, Channel +(up) / -(down) and
PREV. CH (Previous channel)
Connectivity
Component video input
(Y/Pb/Pr)
1
Supporting video signals : 480i/p, 720p, 1080i/p @60Hz
Composite video input
(Shared Y green terminal
with component video)
1
HDMI input
2
Supporting PC-input video signal up to FHD (1920 x 1080)
Supporting HDMI video signals : 480i/p, 720p, 1080i @60Hz, 1080p @24/30/60Hz
Supporting HDMI digital audio signals : LPCM, AC3, DD+
Analog audio L/R input 1 (L audio / R audio)
PC input HDMI and HDMI-DVI + Analog audio L/R
USB 1
Wireless LAN Supporting wireless standards : IEEE 802.1 1 b/g/n (2.4GHz)
Ethernet port 1
Digital audio output 1
Supporting Dolby Audio
Headphone output 1
1/8 inch (3.5mm)
Power
Power requirements 120V∼+/- 10%, 60Hz +/- 0.5%
Temperature
Operating temperature 41 °F (5 °C) to 104 °F (40 °C)
FHD (Full HD) (1920 x 1080 pixels 60Hz)
8W x 2
●Specifications are subject to change without prior notice.
16

7 Warranty
WARRANTY COVERAGE:
This warranty obligation is limited to the terms as set forth
below.
WHO IS COVERED:
This product warranty is issued to the original purchaser or the
person receiving the product as a gift against defects in
materials and workmanship as based on the date of original
purchase (“Warranty Period”) from an Authorized Dealer. The
original sales receipt showing the product name and the
purchase date from an authorized retailer is considered such
proof.
WHAT IS COVERED:
This warranty covers new products if a defect in material or
workmanship occurs and a valid claim is received within the
Warranty Period. At its option, the company will either (1) repair
the product at no charge, using new or refurbished replacement
parts, or (2) exchange the product with a new or refurbished
product at company’s option.
Replacement products or parts provided under this warranty are
covered against defects in materials and workmanship from the
date of the replacement or repair for ninety (90) days or for the
remaining portion of the original product’s warranty, whichever
provides longer coverage for you. When a product or part is
exchanged, any replacement item becomes your property and
the replaced item becomes company property. When a refund
is given, your product becomes company property.
Note: Any product sold and identied as refurbished or renewed
carries a ninety (90) day limited warranty.
Replacement product can only be sent if all warranty
requirements are met. Failure to follow all requirements can
result in delay.
WHAT IS NOT COVERED - EXCLUSIONS AND LIMITATIONS:
This Limited Warranty applies only to new company
manufactured products that can be identied by the trademark,
trade name, or logo afxed to it. This Limited Warranty does
not apply to any hardware product or any software, even if
packaged or sold with the product, as manufacturers, suppliers,
or publishers may provide a separate warranty for their own
products packaged with the bundled product.
The company is not liable for any damage to or loss of any
programs, data, or other information stored on any media
contained within the product, or other additional product or part
not covered by this warranty. Recovery or reinstallation of
programs, data or other information is not covered under this
Limited Warranty.
This warranty does not apply (a) to damage caused by accident,
abuse, misuse, neglect, misapplication, or non-supplied product,
(b) to damage caused by service performed by anyone other
than company approved Authorized Service Location, (c) to a
product or a part that has been modied without written
company permission, or (d) if any serial number has been
removed or defaced, or (e) product, accessories or consumables
sold “AS IS” without warranty of any kind by including
refurbished product sold “AS IS” by some retailers.
This Limited Warranty does not cover:
•Shipping costs for returning defective product.
•Labor charges for installation or setup of the product,
adjustment of customer controls on the product, and
installation or repair of antenna/signal source systems
outside of the product.
•Product repair and/or part replacement because of improper
installation or maintenance, connections to improper voltage
supply, power line surge, lightning damage, retained images
or screen markings resulting from viewing xed stationary
content for extended periods, product cosmetic appearance
items due to normal wear and tear, unauthorized repair or
other cause not within the control of the company.
•Damage or claims for products not being available for use,
or for lost data or lost software.
•Damage from mishandled shipments or transit accidents
when returning product.
•A product that requires modication or adaptation to enable
it to operate in any country other than the country for which
it was designed, manufactured, approved and/or authorized,
or repair of products damaged by these modications.
•A product used for commercial or institutional purposes
(including but not limited to rental purposes).
•Product lost in shipment and no signature verication receipt
can be provided.
•Failure to operate per Owner’s Manual.
TO OBTAIN ASSISTANCE…
Contact the Customer Care Center at:
1 866 341 3738
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS
WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CONSUMER,
WITH THE ISSUING COMPANY NOT LIABLE FOR ANY
INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF
ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT.
EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN
DURATION TO THE DURATION OF THIS WARRANTY.
Some states do not allow the exclusions or limitation of
incidental or consequential damages, or allow limitations on
how long an implied warranty lasts, so the above limitations or
exclusions may not apply to you.
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
FUNAI CORPORATION, Inc. 19900 Van Ness Avenue, Torrance, CA 90501
LIMITED WARRANTY
ONE (1) YEAR PARTS AND LABOR
17
English

License
FUNAI CORPORATION, Inc. hereby offers to deliver,
upon request, a copy of the complete corresponding
source code for the copyrighted open source code
packages, on an “AS IS” basis, used in this product
for which such offer is requested by the respective
licenses. This offer is valid up to three years after the
product purchase to anyone in receipt of this
information. To obtain source code, please contact
FUNAI SERVICE CORPORATION.
You should write to
FUNAI SERVICE CORPORATION
2425 Spiegel Drive, Groveport, OH 43125
[email protected].
FUNAI CORPORATION, Inc. disclaims any and all
warranties and representations with respect to such
software and related source code including quality,
reliability, usability, and accuracy, and further disclaim
all express, implied, statutory or otherwise, including
without limitation, any implied warranties of title, non-
infringement, merchantability, or fitness for a
particular purpose. FUNAI CORPORATION, Inc. shall
not be liable to make any corrections to the open
source software or source code or to provide any
support or assistance with respect to it. FUNAI
CORPORATION, Inc. disclaims any and all liability
arising out of or in connection with the use of this
software and/or source code.
18
ⅰ

Memo
.
19ⅱ

FUNAI CORPORATION, Inc.
19900 Van Ness Avenue, Torrance, CA 90501
Model Number:
43MV347X
To obtain assistance, please contact
customer care at:
1 866 341 3738
Printed in Thailand
AA1V0UT-43FL
2EMN00668 ★★★★★