Magnavox FP4620 User manual

NO
IMAGE
AVAI

SAFETYINSTRUCTIONS- Readbeforeoperatingequipment
Thisproductwasdesignedandmantdacturedtomeetstrictqualityand
safetystandards.Thereare, however,someinstallationandoperation
precautionswhichyoushouldbeparticularlyawareof.
1. ReadInstructions- AllthesafetyandoperaUnginstructionsshould
bereadbeforetheapplianceisoperated.
?_ Retaininstructions- Thesafetyandoperatinginstructionsshould
beretainedforfuturereference.
3. ReedWarnings- Allwarningsontheapplianceandintheoperating
instructionsshouldbeadheredto.
4. FollowInstructions- Alloperatinganduseinstructionsshouldbe
followed.
5. WaterandMoisture- Theapplianceshouldnotbe usednearwater
- forexample,neara bathtub,washbowl,kitchensink,laundrytub,
inawetbasementornearaswimmingpool,etc.
6. CartsandStands- Theapplianceshouldbeusedonlywithacartor
standthatisrecommendedbythemanufacturer.
6A. _An applianceand cartcombinationshouldbemoved
withcare. Quickstops,excessiveforce,and uneven
surfacesmaycausetheapplianceandcart combination
tooverturn.
7. Wallor CeilingMounting- Theapplianceshouldbemountedtoa
wallorceilingonlyasrecommendedbythemanufacturer.
8. Ventilation- Theapplianceshouldbesituatedsothatitslocationor
positiondoesnotinterferewithitsproperventilation.Forexample,
theapplianceshouldnotbesituatedona bed,sofa,rug,or similar
surfacethat may blockthe ventilationopenings;or, placedin a
built-ininstallation,suchasa bookcaseorcabinetthat mayimpede
theflow ofairthroughtheventilationopenings.
9. Heat- Theapplianceshouldbe situatedawayfrom hearsources
suchas radiators,heatregisters,stoves,or otherappliances
(includingamplifiers)that produceheat.
10. PowerSources- Theapplianceshouldbe connectedto a power
supplyonlyofthetypedescribedintheoperatinginstructionsoras
markedontheappliance.
11. Power-CordProtection-Powersupplycordsshouldberoutedso
thattheyare notlikelyto bewalkedonorpinchedbyitemsplaced
uponor againstthem, payingparticularattentionto cordsand
plugs,conveniencereceptacles,andthepointwheretheyexitfrom
theappliance.
12. Cleaning-Theapplianceshouldbecleanedonlyasrecommended
bythemanufacturer.
13. PowerLines- Anoutdoorantennashouldbelocatedawayfror_
powerlines.
14. OutdoorAntennaGrounding- Ifanoutsideantennaisconnectedto
the receiver,besuretheantennasystemis groundedsoas to
providesomeprotectionagainstvoltagesurgesand builtupslatic
charges.
Section810oftheNationalElectricCode,ANSIINFPANo.70-1984,
providesinformationwithrespecttopropergroundingofthe mats
and supportingstructuregroundingofthe lead-inwire to an
antennadischargeunit.sizeof groundingconnectors,locationof
antenna-dischargeunit,connectiontogroundingelectrodesand
requirementsforthegroundingelectrode.SeeFig.below.
15. Non-usePeriods - Thepower cordofthe applianceshouldbe
unpluggedfromtheoutletwhenleftunusedfor a longperiodof
time.
16. ObjectandLiquid Entry- Careshouldbetakensothatobjectsdo
notfall and liquidsare notspilledintotheenclosurethrough
openings.
17. DamageRequiringService- Theapplianceshouldbeservicedby
qualifiedservicepersonnelwhen:
k. Thepowersupplycordortheplughasbeendamaged;or
B. Objects havefallen, or liquid hasbeen spilledinto the
appliance;or
C. Theappliancehasbeenexposedtorain;or
D. Theappliancedoesnotappeartooperatenormallyorexhibits
a markedchangeinperformance;or
E. Theappliancehasbeendropped,ortheenclosuredamaged.
18. Servicing- Theusershouldnotattemptto servicetheappliance
beyondthat describedin the operatinginstructions.All other
servicingshouldbereferredtoqualifiedservicepersonnel.
NotetotheCATVsysteminstaller:.Thisreminderisprovidedtocallthe
CATVsysteminstaller'sattentionto Article820-40 oftheNEC that
providesguidelinesforpropergroundingand,inparticular,specifiesthat
the cablegroundshallbeconnectedto thegroundingsystemofthe
building,asclosetothepointofcableent_aspractical.
EXAMPLEOFANTENNAGROUNDINGASPERNATIONALELECTRICALCODE(NEC)
ExampleofAntennaGrounding
as perNEC- NationalElectricCode
ANTENNALEADIN WIRE
ELECTRICSERVICEEQUIPMENT
ANTENNADISCHARGEUNIT(Ec szc_. _o-,n)
GROUNDINGCONDUCTORS(Ec s_'_oNm-2_)
GROUNDCLAMPS
POWERSERVICEGROUNDINGELECTRODESYSTEM(EcM'r2so.P_.)

_Getting Started
Welcome/Product Registration .................. 5
Safety/Precautions ..................................................... 3
Table of Contents ....................................................... 4
Features and Model Information.............................. .5
F-_ On-Screen Features
PICTURE MENU
€,Adjusting Color, Brightness, Sharpness,
Tint, and Picture Controls ................................... 6
¢,Using the Clearview Control .............................. 7
¢,Adjusting the TV's Convergence Control ........... 8
¢,Using the Flesh Correction Control .................... 9
FEATURES MENU
_,Selecting a Picture Source ................................ 10
_-Setting the TV for Closed Captioning .............. 11
_Setting the TV for Cable or Antenna Signals....12
_'Adding Channels in Memory (Automatically).l 3
_'Adding Channels in Memory (Manually) ......... 14
_Setting the TV Clock and Turn-On Timer ........ 15
¢,Setting the Alternate Channel Control ............. 16
¢'Using the Sleep Timer Control ........................ 16
¢'Adjusting the Channel Display Control ............ 17
_Using the Time/Channel Reminder Control...... 17
SOUND MENU
_'Adjusting Bass, Treble, and Balance Sound
Controls ............................................................. 18
_'Setting the Bass BlbostControl ........................ 18
_'Setting the TV for Stereo and SAP Programs ..19
_'Using the Sound Image Control ........................ 20
_'Using the Volume Display Control ................... 20
_Using the TV Speaker On/Off Control with
the Audio Output jacks ..................................... 21
_Surround Sound Speaker Connections and
Variable Audio Output Control ........................ 22
_'Using the TV's Audio/Video Input and
Output Jacks .............................................. 2..3-24
jRemote (_ontrol Operation
Using Smart Sound Control ....................... .25
Using the Smart Picture Control ............... .25
Setting the Remote to Work VCRs .................... 26-27
Setting the Remote to Work
Cable TV Converters ........................................ 28-29
Setting the Remote to Work VCRs or Cable
Converters - '_3earch Method". ................................ 30
Using the Remote's VCR buttons ............................ 31
_--3 Picture-In-Picture (PIP)
How to Use PIP (Connections) ............ 32-33
How to Use PIP with the TV Remote ...................... 34
Selecting the Picture Source for PIP ........................ 35
Adjusting Picture-in-Picture Color and Tint ............ 36
More PIP Connections (Cable Converter) ............... 37
MGeneral Information
Tips if Something Isn't Working .............. 38
"IVHelp Menu ......................................................... 39
Glossary of TV Terms ............................................. 39
Index ........................................................................ 40
Factory Service Locations .................................. 41-42 I
I
Warranty .................................................................. 43
Accessories .............................................................. 44
Use the simple Set-Up Guide (supplied with
your TV information packet) for details on:
•Antenna Hook-ups
• First Time Set-Up
(Automatic Settings)
•Basic TV and Remote
Control Operation
• On-Screen Menu Use
Copyright @1995 Philips Consumer Electronics Company. All fights reserved.
4

Hrst Tune Set Up which automatically sets the TV
for local channels and the correct picture signal
(antenna orcable). It even helps you make the
necessary connections for the Picture-In-Picture (PIP)
feature.
Infrared Remote Control which operates your TV
set and avariety of wireless remote control VCRs and
Cable TV Conveners.
Standard TV broadcast (NrIIF/UItF) or Cable TV
(CATV) channel capability.
Closed Captioning which allows the viewer to read
TV program dialogue or voice conversations as on-
screen text.
Automatic Programming of channels for quick and
easy selection of favorite stations available in your
area.
Picture-In-Picture (PIP) which can show a TV
program and the direct video output from an accessory
(VCR, etc.) onto the TV screen at the same time.
Stereo-Ready TV with built-in audio amplifier and
twin speaker system. Receives TV programs in both
broadcast stereo sound or (SAP) bilingual broadcast.
On-Screen Features which display helpful
information for the setting of TV controls (such as
help messages, operating tips and glossaries).
Audio/Video jacks for direct connections with VCRs
(and other accessories) for quality TV picture and
sound playback.
Surround Sound external audio speaker connections.
Sleep-Timer which automatically turns the TV OFF at
preset time intervals.
Smart Sound for the control of TV volume levels
during program changes or commercial breaks.
Smart Picture allows you to choose from a list of'IV
video control categories set for avariety of viewing
conditions and program sources.
Clock Tuner feature which can tam ON the TV at
any preset time -just like an alarm clock.
As you unpack your TV please note that the _
following items have been included with your se'
Owner's Manual
Warranty Registration Card
Safety Tip Information
Factory Service Center Address Listings
Remote Control Transmitter
Batteries for Remote Control Use
Audio/Video Cables for Direct Input and
Output Connections.
Please take a few minutes to complete your
registration card. The serial number for the TV is
on the back of the set
To ensure that picture screen performance is of
the highest quality, please avoid robbing any
object or material on the screen that could scratch
or damage its surface.
Refer to the back of this manual for instructions
on the cleaning and care of the TV.

[ BEGIN]
Select BRIGI_NESS,
PICTURE, COLOR, TINT, or
SItARPNESS picture control.
With the PICTURE MENU on
screen, move the RED highlight
with the MENU (M) 4_ buttons.
Then press the MENU button.
_€ ) Press the (+) or (-) buttons to
adjust the selected control.
_Press the STATUS button to
Jolear the screen@
Remember. When the bar
! scale is centered, control
settings are at normal mid-range
levels.
,_RLG,[t_t, fiS Press (-) or (+) until
darkparts of the pictureshowgood
detail.
PICTURE Press (-) or (+) until
whitestparts of the pictureare as
bright as you prefeb
COLOR Press (-) or (+) to add or
eliminate color.
4
TINT Press (-) or (+) to obtain
natural skin tones. (Also see Flesh
Correction on page 14 for more
information).
Press(-)or(+)to
improvedetail inthepicture.
IIII
HOWTO SELECT FEATURES
(WITH BUTTONSON THE REMOTE)
Press MENU (M)
to select RED
highlighted Press MENU (M)
A V to moveUp
and Downwithin
the Menu.
to move from Side-to-
Side within the Menu.
]

arvi_ is a sharpness feature
ich smoothes out
background snow (or picture noise)
without losing picture image detail
or crispness.
1_ Select CLEARVIEW control.
With the PICTURE MENU on
screen, move the RED highlight
with the MENU (M) _1_}buttons.
Then press the MENU button.
<_ Press the MENU A'V' buttons
to move the RED highli@t. Press
the MENU button to select (t,,,')the
ENHANCED mode.
3_,_ Press the STATUS button to
iclear the screen€
-- P_ ICtENU
1
Dd
_t ,i. t,
!.
.....

nVergence is the correct
g up of the red and blue
light paths on the TV screen.
NOTE: If no color fringing (see
Smart Help) shows, then no
Convergence adjustments are
necessary for your TV.
_.._ Select CONVERGENCE
control.
With PICTURE MENU (2 of 2) on
screen, move the REDhighlight
with the MENU (M)4_} buttons.
Then press the MENU button.
_,,_If there is RED or BLUE color.
I fringing on the White cross, press
the MENU button to continue.
_._ Press the MENU 4_ buttons
to move the red or blue cross
directly over the white cross on the
TV screen.
The red or blue cross is properly
adjusted when it is completely
merged with the white cross. (No
color appears around the edge of
the white cross).
_._ Press the STATUS buttonto
clearthescreenwhen convergence
adjustmentsarecomplete.
0
Remember. Convergence
has been set at the factory for
best viewing, but if one or more of
the (red or blue) colors appear
around the edges of objects (color
frin_ng) follow the steps given in
thissection.
,#
•.._ plcnJ_ MENu
1'0g'27
<
pu_"TUP.£MENU
t, t° _ot °t
•1, i* lot •t
201:21
If _ere isREDorBLUE
fringeonthe WHITEcross.
usethis adjustmentI_
improvethe picture.
Press"M"mContinue
-or'-
Press "_"m Return
.1
%. I
8

Scoethe Flesh Correction
ntrol to keep skin tone hues
(or facial tint)from varying from
TV channel to TV channel.
1@ Select FLESH
CORRECTION control.
With PICTURE MENU (2 of 2) on
screen, move the RED highlight
with the MENU (M)4_ buttons.
Then press the MENU button.
_Press the MENU &'Y' buttons
to move the RED highlight. Press
the MENU button to turn (v_) the
FLESH CORRECTION control
ON.
3_ Press button m
theSTATUS
clear the screen.
i PICTURE MENU
,_ _,t =I=/a,lm
2 OF2_
]

_th e picture for the 7V can come
rough either the ANTENNA
plug or the AUDIOIVIDEO INput
jacks (on the rear of the TV). The
Picture Source control simply tells
the TV which one of these picture
sources it is to show on the TV
screen.
_ Select PICTURE SOURCE
SELECT control.
With the FEATURES MENU on
screen, move the RED highlight
with the MENU (M)4_-} buttons.
Then press the MENU button.
_._ Press the MENU _k_' buttons
to move the RED highlight. Press
the MENU button to turn the
desired PICTURE SOURCE
control ON (v,').
ANTENNA- for a picture signal
coming from the ANTENNA
plug on the TV.
VCR/AUX- for a picture signal
coming from the Video Input
jack on the rear of the TV.
Press the STATUS button to
clear the screen.
@
m _Tt$:_ MENU
,I, I, |o .
NN NN
1 (_: 3"_=_
1
V
Remember. The
tiVCR/AUX TV screen will
be blank unless a signal source is
eormected to the Video Input jack
on the rear of the TV. (See page
23 for details).
lO

_y;ed Captioning (CC ) allows
uto read the voice content of
television programs on the TV
screen. Designed to help the hearing
impaired this feature uses on-screen
"text boxes" to show dialogue and
conversations while the TVprogram
is in progress.
_Select CLOSED
CAPTIONING control.
With the FEATURF.S MENU on
screen, move the RED highlight
with the MENU (M) (_ buttons.
Then press the MENU button.
2_ Press the MENU a,y buttons
to move the RED highlight. Press
the MENU button to select (p") the
desired Closed Caption mode -For
Example: "ALWAYS ON" and
"CAPTION 1".
CAPTION 1, 2, 3, 4:
dialogue (and descriptions)
for the action on the captioned
TV program shows on-screen.
(See Important Note on this
page.)
TEXT 1, 2, 3, 4:
often used for channel guide,
schedules, or bulletin board
information for CC programs.
_After making your Caption mode
selection, press tl_ STATUS button
to clear the TV screen. The selected
Closed Caption mode will be active.
To cancel_ set the Closed Captioned
featureto OFF when finished
0
Remember. Broadcast
stations will often use
spelling abbreviations, symbols,
dropouts and other grammatical
shortcuts in order to keep pace
with the on-screen action. These
type factors vary upon the source
of the captioned text material and
do not indicate a need for service
on the part of the TV.
NOTE: Not all TV programs and product commercials are made for broadcast I
with Closed Caption (CC) information included. Neither are all Closed Caption
modes (CAPTION 1-4; or TEXT 1-4) necessarily being used by abroadcast station
during the transmission of a closed caption program. Usually '_APTION 1"is the
most used mode to view captioned material. Refer to your area's "IV program
listings for the stations and times of Closed Caption shows.
IIII I
iX;RING
set the TVto
CAPTIONImode
_,_ Scnma_splay
Closed Caption information will usuallyappear
inblack andwhite (althoughsome &oadcaste_
or networksmay o_a.,;iceally use color to
highlight or draw attentio_ to certainla'eas.)
FULL SCREENTEXT
will blockTV screenfromviewing
11

ou need to make sure the TV is
et to pick up either Cable TV
or Antenna signals. In other words
the TV needs to know if you
connected a Cable TV signal or a
normal antenna to its ANTENNA
plug.
NOTE: lf you went through First
Time Setup (in your Quick Use
Guide), this task has already been
completed for you.
_Select CABLE CHANNEL
TUNING control.
With the FEATURES MENU on
screen, move the RED highlight
with the MENU (M) _'_ buttons.
Then press the MENU_button.
_Press the MENU ,I,T buttons
to move the RED highlight. Press
the MENU button to select (wr) th_
desired mode - For Example:
CABLE.
CABLE- If you DO have
Cable TV connected
to the TV. Channels
i-125 available.
NORMAL- If you have an
Antenna connected
to the TV. Channels
2-69 available.
_Press the STATUS button to
clear the screen.
O
!-@:888
j
l
12

UrTV can automatically set itself
r local area (or Cable TV)
channels. This makes it easy for you
to select only the TV stations in your
area when the CHANNEL • •
buttons are pressed.
NOTE: If you went through First
Time Setup (in your Quick Use
Guide), this task has already been
completed for you.
[ BEGIN]
_Select CHANNEL MEMORY
(START AUTOPROGRAMMING)
control.
With the FEATURES MENU on
screen, move the RED highlight with
the MENU (M)_ buttons. Then
press the MENU button.
_ Press the MENU button to turn
AUTOPROGRAMMING ON.
The TV shows which channel
numbers are "SAVED" (_") as they
are added into memory.
"Auto-programming CHANNEL
MEMORY is finished" shows when
the TV is through adding channels.
Press the STATUS or Menu 0VI)
I button to clear the screen.
0/,JClmm'_lNumbers arcf Saved mM_nory
FE_TUFE MENU
,__
[START ["
I
AU'/D.FROGRAMMING ]
CHANNELME_Y
1 2,, r3_ 4€"
5v" 6_,f7€* 8_
9€ _ 10 11 12
'13 14 15 115
17 18 19 20
21 22 23 24
.1
Try it out. Press the
_ CHANNELA• buttons
and see which channels you can
select.
Remember. An Antenna or Cable
"IV signal must f'wstbe connected
to your TV so that channels can be
saved.
If you want to delete any
unwanted channels from the TV's
memory, see "ADD/DELETE
CHANNELS" on the next page.
13

UtOProgramming (see
revioas page) adds all the
channels it canfind (on your
Antenna or Cable TVsystem) into
the TV's mecnory. AddlDelete
Channels makes it easy for you to
add other channels, or drop
unwanted channels, from the list of
channels in the TV'smemory.
_.,_ Select CHANNEL MEMORY
(ADD/DELETE Ci]ANNE_)
control.
With the FEATURES MENU on
screen, move the RED highlight
with the MENU (M)4_}buttons.
Then press the MENU button.
2_,_ Press the CHANNEL AY or
number buttons to select the
channel you want to add or delete.
_Press the MENU I_ button to
ADD the channel into the TV's
memo_.
Press the MENU _I button to
DELETE the channel from
memory.
Repeat steps 2and 3 for each
channel you wish to add or delete.
4_ Press the STATUS or MENU
button to clear the screen when
through. Q
Remember. You can also
[[add the VCR!AUX mode just
like a channel. Then by pressing
the CHANNEL &_' buttons the
VCR/AUX mode can quickly be
selected to use the Input jacks on
the rear of the "IV(see page 23._.
Note: 'WCR/AUX" mode is
located between the lowest and
highest channel numbers within
the ADD/DELETE CHANNEL
control screen.
n frr..A'[1Jl_MEMJ
w{>h_NN[L MBVU_Y
_,to o ,J,t,
"i ,_,'_=j_ i;
14
]

our TV comes with an on-
creen clock. During normal
operation the clock appears on the
screen with every channel change
(and when the STATUS button is
pressed).
,(€OTE: If you went through First
Time Setup (in your Quick Use
Guide), this task has already been
completed for you.
(BEGIN_
_Select SET CLOCK control.
Remember,
be sure to press'_)"
first and then the
hour number for
single digit entries.
Theremote's
MENU (IV[) _
buttons can also be
used to set the
hours, minutes and
AM/PM portions of
With FEA'HJRES MENU (2 of 3)
on screen, move the RInD highlight
with the MENU (M)4*_ buttons.
Then press the MENU button.
_,_ Press the remote's number
buttons to set the time clock.
_,.,_ Press the STATUS button to
set the clock in operation and clear
the screen. O.IlW_h'r HDOR
t like an alarm clock you can
et the TV to turn itself on at the
same time everyday.
( BEGIN]
_,_ Select SET ON TIMER
control.
With FEATURES MENU (2 of 3)
on screen, move tl_ I_D highlight
with the MENU (M) 4_buttons.
Then press the ME_N0 button.
_,,,_ Press the MENU AV and
MENU (M) buttons to highlightand select 'ON" (_,,€).
_Press the MENU AV and
then the MENU (M) buttons to
select "SET ON TIME".
_,> Press the remote's number
I buttons tOset the "IIJRN ON"
•[time for the TV. (Press MENU A
I • for AM or PM.)
_,_ Press the STATUS button to
[set the "ON TIME" and clear the
/ O
the clock.
15
- -- SET 0N "nMEn _-_
,l°,.#°
Ngl .
,,...,°
o#..._,
r-_
I
r_-'l

Aring" or series of previously
viewed channels can be selected
from the Alternate Channel (AICH)
button on your remote control. With
this feature you can easily switch
between _'fferent TVprograms that
currently interest you. TheALT.
CHN. menu control allows you to set
up tofour channels in the viewing
"ring". [ BEGIN)
_ select ALTERNATE
CHANNEL control.
With FEATURES MENU (2 of 3) on
screen, move the RED,_highlight
with the MENU (M) 4_ buttons.
Then press the MENU button.
_€2_ Press the MENU &Y and
MENU (M) buttons to highlight and
select (t_ the number of channels in
the 'Ying" (either 2, 3, or 4channels.)
Press STATUS button to clear the
0
ol,l,i,
!
, ...,._......
aY; you ever fallen asleep in
nt of the TV only to have it
wake you up at two in the morning
with a test pattern screeching in
your ears? Well, your TV can save
you all that trouble by
automatically turning itself off.
<,_ Select SLE_R control.
with FEATURES MENU (2of 3)
on screen, move the P-xEDhighlight
with the _ (M)4_*_buttons.
Then press the MENU button.
_Press the MENU •J_buttons
to pick the amount of time (15
minutes to 2 hours ahead) before
the TV will turn itself off.
_Press the STATUS or MENU
(M) button to clear the screen after
you have set the time for the TV to
turn off.
............ +-..-.... 1'01:'3;-:_'--', ,
V
_OF3o_
16
Remember, __
to fast use this
feature press the
A/CH and then the
MENU button on
the remote. Then
select the desired
channels with the
number buttons on
the remote. (For
example for a "4"
channel ring select:
02, 06, I 1, and 22.)
Then press the
A/CH button on the
remote to quickly
select the channels
in the 'Ying". Great
for viewing evening
news or sports
prograrnming.
2
6
1"1
,_. €_c,_._ ¢a_. _.
Remember,
to see how many
minutes areleft
before the TV shuts
itself off, reseleet
the SLEEP TIMER
control screen.
To stop a SLEEP
TIMER setting,
reset the timer back
to OFF. (Turning
the TV off and on,
or pressing a button
during the last
minute of a timer
setting, will also
cancel a setting.)
A few seconds
before the TV is to
shut off a message
will come on the
screen telling you
GOOD NIGHT. i

ththeChannelDisplay
ntrolyou canchangethe.
sizeand locationoftheonscreen
channeland clockinformation.
_.,_ Select CHANNEL DISPLAY
control.
With FEATURES MENU (2 of 3)
on screen, lnove the RED
:highlight with the MENU (M)4_k
buttons. Then press the MENU
button.
_,,_ Press the MENU A_' and
:MENU (M) buttons to highlight
and select (t,,') the LARGE or
SMALL display control.
_.,_ Press the STATUS button to
clear the screen.
0
1
Try it out.
Press the
CHANNEL dkV
buttons and you
should see the
Display Size you
selected.
Remember. The
SMALL SIZE
display shows only
the channel number,
not the time (or
clock).
CHANNEL DISPLAY OPTIONS
th the Half Hour Reminder
ontrol the TV automatically
shows you the current time and
channel every thirty minutes.
_.) Select HALF HOUR
REMINDER control.
'With FEATURES MENU (3 of 3)
on screen, move the RED
highlight wj,th the MENU (M) 4_
buttons. Then press the MENU
button.
_,,_ Press the MENU AY and
.,MENU (M) buttons tohighlight
and select (_) the EVERY HALF
HOUR item.
_Press the STATUS button to
I clear the screen.
0
Remember,
the Time and
Channel Reminders
will show on the
hour and the half-
hour for about five
seconds.
17

Select BASS, or TREBLE, or
BALANCE sound control.
With the SOUND MENU on the
screen, move the RED highlight
with the MENU (M) _ buttons.
Then press the MENU button.
)Press the (+) or (-) buttons to
adjust the sound control to levels
you prefer.
_.._ Press the STATUS button to
clear the screen.0
...... •.... _. ;.. - I 0F3..' ....
_BASS BOOST control
reases the low frequency
audio range of the TV. This creates
adeeper, fuller playback sound
which can be heard through the
TV's speakers.
Select BASS BOOST sound
control.
With the SOUND MENU on the
screen, move the RED highlight
with the MENU (M) 4_ buttons.
Then press the MENU button.
_Press the MENU AV and
MENU (lVl)buttons to highlight
and turn ON (lJ)the BASS
BOOST control.
_,_ Press the STATUS buttonto
clearthe screen.
O
!r"i _ •
18
]

ur TV is able to receive
roadcast stereo TV programs.
The TV is equipped with an
amplifier and twin speaker system
through which the stereo sound
can be heard.
A RED stereo light (on the front of
the 7"V)will come on when a
stereo broadcast is received.
_,_ Select STEREO sound control.
With the SOUND MENU on the
screen, move the RED highli_t
with the MENU (M) 4_buttons.
,qr
Then press the MENU button.
_,_ Press the MENU 4k_' and
MENU (M) buttons to highlight
and turn ON (v'€) the STEREO
mode.
_._ Press the STATUS button to
clear the screen.
0
mMAINMENU
III I [.
Remember.
If astereo signal is
not available and
the "IV is placed in
the STEREO mode,
sound coming from
the "IV will remain
monaural (mono).
/
(
partof the stereo broadcast
system. Sent as athird audio
channel SAP can be heard apart
from the current TV program
sound. TV stations are free to use
SAP for any number of purposes,
but many experts believe it will
be used for foreign language
translations of "IVshows (or for
weather and news bulletins.)
NOTE: If a SAP signal is not
present with aselected program,
the SAP option can not be
selected. 'q'his program does not
contain SAP information" will
show on the TV screen.
SECOND PROGRAM SOUND CAN
ONLY BE SELECTED (_,r)WHEN
PRESENT
19

Tus e Sound Image control can be
ed to add greater depth and
dimension to both monaural
(MONO) and STEREO TV sound.
.,> Select SOUND IMAGE
control.
With the SOUND MENU on the
screen, move the REDhighlight
with the MENU (M)4_ buttons.
Then press the MENU button.
_,_ Press the MENU AY and
MENU (M) buttons to highlight
and select (u,') the desired SOUND
IMAGE mode.
For Example: 'qVIAXIMUM"
spreads the Sound Image effect as
wide as possible.
_,_ Press the STATUS button to
clear the screen.O
• - -- ItIAIN M[NU - ._ .... - •
llal t
...._ MG',4U ....... - .....
• -..- -• 'iroOF_-
D W
Remember, g
with the Sound
Image control
turned ON even
monaural (mono)
audio source
material can be
heard through rear
Surround Sound
speaker connections
(see page 22).
Note: The monaural
version of Surround
Sound may be
louder at the rear set
of speakers than
what is normally
heard with true
stereo signal
Surround Sound,
but this is normal.
ethe DISPLAY VOLUME
ontrol to see the TV's volume
level settings on the TV screen.
Once set the Volume Display will
,beseen each time the VOLUME
,buttons (on the TV or remote) are
pressed.
_Select DISPLAY VOLUME
control.
With SOUN_ MENU (2 of 3) on
:_-'reen,move the REDhighlight
with the MENU (M)4_} buttons.
Then press the MENU button.
_,_ Press the MENU AY and
MENU (M) buttons to highlight
and turn ON (t,,€) the DISPLAY
"VOLUME control.
_,_ Press the STATUS button to
I clear the screen.
O
.... _ LfJ_IU ........
1
Remember,
93URING
ADJUSTMENT"
means the volume
level will be on
screen whenever the
Volume buttons are
pressed.
2O