SMART TRAC DM6420 Multi I/O Card
4•• DM6420 Multi I/O Driver Installation Engineer's Guide EM-3643-0050
Figure 2. I/O Driver Install dialog box.
To view driver .dll files, you
must select View All Files in
Windows NT Explorer. If you
have Windows NT without
IE4.0 installed: from
Explorer, click View,
Options, click View tab. In
Hidden Files, click Show all
files If you have IE4.0
installed: from Explorer, click
View, Folder Options,
click the View tab. In
Advanced Settings,click
Show All Files in the
Hidden files folder.
4. Click the small box containing three dots (…) to the far right of the
Data File (*.ini) box. This allows you to browse for the initialization
file on your system (generally the driver will be installed from your
CD_ROM). For our example, we assume the file is on a floppy in the
A: drive. Find the file DM6420.ini and OPEN it. Two more b
entry of Config.exe and Help.exe, become active.
5. Click the small box containing three dots (…) to the far right of the
Config (*.exe) box. Browse for the DM6420CFG.EXE file. Press
TAB or ENTER. More boxes will become active.
6. Click the small box containing three dots (…) to the far right of the Dll
files (*.dll), Pharlap box. Browse for the DM6420.dll file. Press
TAB or ENTER.
7. Click the small box containing three dots (…) to the far right of the
Help (*.chm) box. Browse for the STDM6420EM.CHM file. Press
TAB or ENTER. The screen should look like the following (if
installing from the A:\drive).
