Magus MCBIR3100B User manual

• Specification
Model
Pick up Element
Effective Picture Elements
(H-V)
Resolution
Minimum Illumination
S N Ratio
Scannmg System
Synchronous System
Auto Electronic Shutter
Gama Characteristic
IR Distance
Video Output
Auto Gain Control
Power Current
Dimension (mm)
Weight (g)
Storage Temperature
Operating Temperature
• Packing List
MCBIR3100B
1.
1
3 SONY I.3Megapixcl CMOS Sensor
1305(H) XI049(VI
1000TVL
0.01 LuxIF1.2
More than SOdB
Progressive
Internal. Negative sync.
NTSC: 1/60s-1/100.0oos. PAL: 1/5Os-1/100.0oos
0.45
30 ME/ters(with q; 5X36 PCS Infrared LED)
1Vpp.750
Auto
OC12V(+J-10%) 45OmA
CS Lens 6mrri F2.0
213 (W) x93(H) x83(O)
880
-30-+60'C RH95% MAX
-10-+5O'C RH95% MAX
Name
•
•
•
Model Number
Weatherproof IR Color Camera
User Guide
MCBIR3100B
MCBIR3100B
•
••
,
US
SECURE
Franchiser:
------_ ... _ .... _._---_._ •.... __ ....
Weatherproof IR Color Camera
Notes: Before providing power for the
camera, please read this User Guide in
detail
Do not attempt to disassemble the camera.
If the camera can not work. please contact
local franchiser or our company.

• BRIEF OF PRODUCT
* Sensor (CMOS)
Adopt SONY 1/3 CMOS Sensor.
* Auto Gain Control (AGC)
Built-in auto gain control (AGC) circuit. The color camera
can get high definition picture in low Lux condition.
* Scanning Mode
NTSC or PAL mode.
* Water Resistance
IP66
* Support UTC function
With UTC Remote Controller for the convenience of
OSD menu setting.
* OSO SETTING
3D-NR ON/OFF
AE MODE GLOBALICENTER/CENTERWEIGHT/BLACK
IGHT/FRONT LIGHT/DISTINGUISH
IMAGE ENHANCE ~HARPNESS/CONTRAST/SA TURATION
IMAGE bN/OFFMIRROR
FLIP ON/OFF
BRIGHTNESS p.l0.20 .. 250
ZOOM IN ~O 60. 70. 80. 90. 100
DAY&NI AUTO
GHT IR-CUT
AWB-PRO
AWB-TEMPORAL
AWB-AI
WB AWB-SZ
OSD AWB-GW
SET AWB-CCT
COLOR MOSAICrwHITEIYELLOW/CYAN/GREEN/
ZONE MAGENT AIRED/BLUE/BLACK
MASK-
ING AREA NO.O - AREA
NO.7
DIREC- AREA NO.O - AREA
TION NO.3
LAN- ENGLISH
GUAGE CHINESE
OAD OEFAULT
::iOFT VERION
SAVE&EXIT
• CONNECTING
Monitor
I KFY BOARD I
GLJ
MCBIR3100B
[S]
~B·EI~
[S]
Link wire rule:
Video ~-IO-- ..-t--•... ,*<O
Power ------- .":':'.
DC12V Power Suppty
TROUBLE AND SOLUTION
1. No Picture after providing power
· May be the power supply voltage abnormity, please check the power
supply voltage and pole whether exactitude.
· Please check all the connecting cable and monitors whether be connected
correctly or not.
2. The picture level direction have flowing Interference ripples
· May be caused by the power supply AC ripples, it need filter the wave of the
power supply.
· Check the monitor and peripheral equipments used.
3. The picture background color changes continuously
· The fluorescent lamp's electromagnetic field cause color roll. This is proper
phenomenon of the cameras.
· Reduce the fluorescent lamp numbers or increase the distance between the
camera and the fluorescent lamps can improve it.
Use power supply external sync. camera can solve it.
4. The picture smear too mass
· The power supply's voltage unstable.
· Connecting cables not connect correctly or have high impedance.
,..ill Notes:
eThe power supply musl through safe attestation. Its output voltage.
current. voltage polanty and operatinq temperature must match the
camera's requirement.
eWhen usinq the camera in the thunderbolt condition. please note to
mount Anti-thunder device or put off the power supply plug and cable.
eln order to capture high quality pictures. the power supply's cable and
video output cable should not be too long .
••••
,'
• INTRODUCTION
Congratulations on your purchase of this product.
This User Guide suits MCBIR3100B product. We adopt
the latest SONY technical of sensor and driver. The most
attractive characteristics are small and easy hidden, suits
the elevator and corridor. In addition, it owns the charac-
ters of high definition and stability, strong anti-jamming,
rich and real color. Fixing and using this model are con-
venient too. It is very good for you to apply to your CCTV
system.
Please read this instruction manual carefully to en-
sure proper use of the product.
The symbol is intended to alert the user to the presence of
important operating and maintenance (servicing)
Instructions in the literature accompanying the appliance.
The symbol is intended to alert the user to the presence of
uninsulated 'dangerous voltage' within the product's
enclosure that may be of sufficient Magnitude to constitute
a risk of electric shock to persons.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER OR BACK NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
CAUTION: TO PREVENT ELECTRIC SHOCKS AND RISK OF
FIRE HAZARDS, DO NOT USE OTHER THAN
SPECIFIED POWER SOURCE.
r
ffi Note:
e Please note the camera's operating temperature and its using
environment requirement. Avoid using the camera at too high or
too low temperatures. The operating temperature IS -30-+60 (
(Recommendatory operating temperature is -10-+50 l .)
• Never make the camera face lhe sun or bright object. Other-
wise. it will damage the CMOS
• Do not mount the camera near by the radiator or heater.
'- .