Maiden Home The Muir Sectional User manual

[e-mail]
(888) 513 - 5754
The Muir Sectional
Assembly Instructions

[e-mail]
(888) 513 - 5754
The Muir Sectional
Assembly Instructions
Sofa Components
Short Screws (12)
Throw Pillows (6)
Legs (3)
Long Screws (15)
Arm (1) Support Leg (1)
Side Table Platform (1)
Shorter Backrest (1)
Seat Cushions (2)
Back Pillows (6)
Return Sofa Platform (1)
Longer Backrest (1)
Note: 120x102 Sectionals have 15 long screws and 130x112 Sectionals have 16 long screws.

[e-mail]
(888) 513 - 5754
The Muir Sectional
Assembly Instructions
1Secure both legs to the side table platform base by placing the short screws with washers into the pre-drilled holes
of the platform base. Ensure the leg installed opposite the side table has pre-drilled holes that are facing towards the
outside of the frame. Use an allen key to tighten the screws, being careful not to over tighten.

[e-mail]
(888) 513 - 5754
The Muir Sectional
Assembly Instructions
2Elevate the return sofa platform on top of two blocks or stacks of books, making sure it is lat and facing up. Place the
ledge of the longer backrest into the longest slot of the return sofa platform.

[e-mail]
(888) 513 - 5754
The Muir Sectional
Assembly Instructions
3Place the ledge of the arm panel into the designated slot and connect to the backrest by inserting the pre-attached
prolonged fastener into the backrest slot and hooking into place. Press down irmly to set in place.

[e-mail]
(888) 513 - 5754
The Muir Sectional
Assembly Instructions
4While holding the backrest and arm in place, carefully rotate the piece o of the blocks and onto the loor, so it is
resting on the backrest. Secure both the arm piece and backrest by placing the long screws with washers into the pre-
drilled holes of the platform base. Use an allen key to tighten the screws, being careful not to over tighten.

[e-mail]
(888) 513 - 5754
The Muir Sectional
Assembly Instructions
5Secure the leg and support leg to the return sofa platform base by placing the short screws with washers into the pre-
drilled holes of the platform base. Ensure the corner of the support leg is aligned to the outside corner of the platform
base. Use an allen key to tighten the screws, being careful not to over tighten.

[e-mail]
(888) 513 - 5754
The Muir Sectional
Assembly Instructions
6Carefully lip the return sofa platform base upright. Secure the two platforms together by placing the short screws with
washers through the pre-drilled holes in the cleat and leg of the platform bases. Use an allen key to tighten the screws,
being careful not to over tighten.

[e-mail]
(888) 513 - 5754
The Muir Sectional
Assembly Instructions
7Place the ledge of the shorter backrest panel into the designated slot and connect to the longer backrest by inserting
the pre-attached prolonged fastener into the backrest slot and hooking into place. Press down irmly to set in place.

[e-mail]
(888) 513 - 5754
The Muir Sectional
Assembly Instructions
8Secure the shorter backrest by placing the long screws with washers into the pre-drilled holes of both platform bases.
Use an allen key to tighten the screws, being careful not to over tighten.

[e-mail]
(888) 513 - 5754
The Muir Sectional
Assembly Instructions
9Set the seat and back cushions into place, securing seat cushions with the tie-down toggles.