Maine Cottage Island Settee User manual

Day Bed Assembly Instructions
Island Seee
Low Tide Daybed

(1) Back Headboard (6) Bed Slats
6. Headboard and Footboard for Bottom Bunk (2 pieces)
or 2 Headboards for Single Beds Option
DAY BED ASSEMBLY INSTRUCTIONS
PARTS LIST
866-366-3505 M-F, 9-5
(1) Front Rail
(2) Side Boards with Three Pre-installled Metal Bed Bracket Hardware Components on Each
(4) Ball Finials with Dowels
FRONT RAIL
CONNECTOR
TOP
HEADBOARD
CONNECTOR
BOTTOM
HEADBOARD
CONNECTOR
INSIDE/FRONT OF
HEADBOARD
BACK OF
HEADBOARD

(6) Bed Slats
Now that you have three pieces of the frame
attached and free standing. Now you can begin to
attach the Back Headboard using the same click
and lock connection technique. It may take two
people holding the headbaord and guiding in all
four connection points so they click in at the
same time.
male portion of the
metal bed bracket hardware
STEP ONE:
CONNECT THE FRONT RAIL TO THE TWO SIDE BOARDS
STEP TWO:
CONNECT THE BACK HEADBOARD TO THE TWO SIDE BOARDS
To attach the Front Rail to the Side Rails, align the metal male
components on the Front Rail with the female components on the
metal bracket on the Side Rails. Press down until it “clicks” into
place.
Lay down all 6 Bed Slats on the Bed Slat Ledges
so that they are evenly spaced. You should position
one close to each end and one perfectly centered
on the bed. Lay your bunkie board (sold seperately)
on top and the Bed Slats, then add your low prole
mattress (sold seperately).