Makita DUC307 User manual

DUC307
DUC357
DUC407
EN Cordless Chain Saw INSTRUCTION MANUAL 9
ZHCN 充电式链锯 使用说明书 23
ID Gergaji Mesin Nirkabel PETUNJUK PENGGUNAAN 38
MS Gergaji Rantai Tanpa Kord MANUAL ARAHAN 54
VI Máy Cưa Xích Cầm Tay Hoạt
Động Bằng Pin TÀI LIỆU HƯỚNG DẪN 70
TH   85

2
Fig.1
1
34
5
6
7
8
9
10
11
13
14
2
12
Fig.2
1
2
3
Fig.3
1
2
Fig.4

3
1
2
Fig.5
2
1
3
23
1
Fig.6
1
Fig.7
1
2
Fig.8
1
Fig.9
1
Fig.10
1
2
Fig.11

4
3
1
2
Fig.12
1
2
Fig.13
1
Fig.14
1
Fig.15
2
1
Fig.16
1
Fig.17
2
1
Fig.18

5
2
3
1
Fig.19
1
2
Fig.20
1
2
Fig.21
Fig.22
Fig.23
Fig.24
Fig.25
Fig.26

6
A
B
A
B
Fig.27
Fig.28
2
1
/2
45o
1
45o
Fig.29
1
2
2
33
Fig.30
Fig.31
Fig.32
1
2
Fig.33
22
11
31
Fig.34

7
30
30
55 55
Fig.35
1
2
Fig.36
30
1/5
1
Fig.37
Fig.38
Fig.39
Fig.40
2
1
Fig.41
1
2
Fig.42

8
12
Fig.43

9ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model: DUC307 DUC357 DUC407
Overall length
(without guide bar)
428 mm
Rated voltage D.C. 18 V
Net weight *1 2.9 kg
*2 4.2 - 4.4 kg
Standard guide bar length 300 mm 350 mm 400 mm
Recommended
guide bar length
90PX 300 - 400 mm
91PX -350 mm -
Applicable saw chain type
(refer to the table below)
90PX
91PX
Sprocket Number of teeth 6
Pitch 3/8"
Chain speed 0 - 7.7 m/s
(0 - 460 m/min)
Chain oil tank volume 150 cm3
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsmaydi󰀨erfromcountrytocountry.
*1: Weight, without the saw chain, guide bar, guide bar cover, oil and battery cartridge(s).
*2:Thelightestandheaviestcombinationofweight,accordingtoEPTA-Procedure01/2014.Theweightmaydi󰀨er
depending on the attachment(s), including the battery cartridge(s).
Saw chain, guide bar, and sprocket combination
Saw chain type 90PX
Number of drive links 46 52 56
Guide bar Guide bar length 300 mm 350 mm 400 mm
Cutting length 275 mm 330 mm 370 mm
Pitch 3/8"
Gauge 1.1 mm
Type Sprocket nose bar
Sprocket Number of teeth 6
Pitch 3/8"
Saw chain type 91PX
Number of drive links 52
Guide bar Guide bar length 350 mm
Cutting length 330 mm
Pitch 3/8"
Gauge 1.3 mm
Type Sprocket nose bar
Sprocket Number of teeth 6
Pitch 3/8"
WARNING:Useappropriatecombinationoftheguidebarandsawchain.Otherwisepersonalinjurymay
result.

10 ENGLISH
Applicable battery cartridge and charger
Battery cartridge BL1830B / BL1840B / BL1850B / BL1860B
Charger DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
DC18SH
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
andchargersmaycauseinjuryand/orre.
Recommended cord connected power source
Portable power pack PDC01
• The cord connected power source(s) listed above may not be available depending on your region of residence.
• Before using the cord connected power source, read instruction and cautionary markings on them.
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Read instruction manual.
Wear safety glasses.
Wear ear protection.
Maximum permissible cut length
Always use two hands when operating the
chain saw.
Beware of chain saw kickback and avoid
contact with bar tip.
Do not expose to moisture.
Direction of chain travel
Sawchainoiladjustment
Ni-MH
Li-ion
Only for EU countries
Due to the presence of hazardous com-
ponents in the equipment, waste electrical
and electronic equipment, accumulators
and batteries may have a negative impact
on the environment and human health.
Do not dispose of electrical and electronic
appliances or batteries with household
waste!
In accordance with the European Directive
on waste electrical and electronic equip-
ment and on accumulators and batteries
and waste accumulators and batteries,
as well as their adaptation to national law,
waste electrical equipment, batteries and
accumulators should be stored separately
and delivered to a separate collection point
for municipal waste, operating in accor-
dance with the regulations on environmen-
tal protection.
This is indicated by the symbol of the
crossed-out wheeled bin placed on the
equipment.
Guaranteed sound power level according
to EU Outdoor Noise Directive.
Sound power level according to Australia
NSW Noise Control Regulation.
Intended use
This chain saw is intended for sawing wood.