4ENGLISH
General power tool safety warnings
WARNING:
Read all safety warnings, instruc-
power tool.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
(cordless) power tool.
Hammer drill safety warnings
Safety instructions for all operations
1. Wear ear protectors when impact drilling.
2. Use the auxiliary handle(s). Loss of control can
3.
Hold the power tool by insulated gripping sur-
faces, when performing an operation where the
cutting accessory may contact hidden wiring or
its own cord. Cutting accessory contacting a "live"
"live" and could give the operator an electric shock.
4.
one is below when using the tool in high locations.
5.
6. Keep hands away from rotating parts.
7. Do not leave the tool running. Operate the tool
only when hand-held.
8.
immediately after operation; they may be
9.
Some material contains chemicals which may be
10. If the drill bit cannot be loosened even you
open the jaws, use pliers to pull it out. In such a
Safety instructions when using long drill bits
1.
Never operate at higher speed than the maximum
speed rating of the drill bit. At higher speeds, the
2.
Always start drilling at low speed and with the bit
At higher speeds,
3.
Apply pressure only in direct line with the bit and do
not apply excessive pressure.
SAVE THESE INSTRUCTIONS.
WARNING: DO NOT let comfort or familiarity
with product (gained from repeated use) replace
strict adherence to safety rules for the subject
product. MISUSE or failure to follow the safety
rules stated in this instruction manual may cause
serious personal injury.
FUNCTIONAL
DESCRIPTION
CAUTION: Always be sure that the tool is
Switch action
WARNING: Before plugging in the tool,
-
ates properly and returns to the "OFF" position
when released.
Fig.1: 1. Switch trigger 2.
To start the tool, simply pull the switch trigger. Tool
trigger. Release the switch trigger to stop.
For continuous operation, pull the switch trigger, push
To stop the tool from the locked position, pull the switch
trigger fully, then release it.
CAUTION: -
tion for ease of operator comfort during extended
Reversing switch action
CAUTION:
rotation before operation.
CAUTION: Use the reversing switch only after
the tool comes to a complete stop. Changing the
-
age the tool.
Fig.2: 1. Reversing switch lever
This tool has a reversing switch to change the direc-
tion of rotation. Move the reversing switch lever to the
position (A side) for clockwise rotation or to the posi-
tion (B side) for counterclockwise rotation.
Selecting the action mode
CAUTION: Always slide the action mode
changing lever all the way to your desired mode
position. If you operate the tool with the lever posi-
Fig.3: 1. Action mode changing lever
This tool has an action mode changing lever. For rota-
tion with hammering, slide the action mode changing
lever to the right (
action mode changing lever to the left (
