Mania HIPOINT User manual

INSTRUCTION MANUAL
CAR BLUETOOTH
SPEAKERPHONE HIPOINT
PACKAGE CONTENTS
•Bluetooth speakerphone
•12 V charging adapter
•Micro USB charging cable
•Sun visor mount
•Instruction manual
TECHNICAL SPECIFICATIONS
•Power supply: Built-in rechargeable lithium
battery
•Charging: Micro USB cable
•Charging voltage: 5 V ⎓500 mA
•Bluetooth version: 5.0
•Range: 10 m
•Material: ABS
•Size: 5 × 13 cm
COMPONENTS
(1) Microphone
(2) Volume -/previous song
(3) Volume +/next song
(4) Speaker
(5) On/off
(6) Voice mode
(7) Accept call/reject call/play
(8) Micro USB charging cable
(9) Sun visor mount
(10) 12 V charging adapter
CHARGING THE DEVICE
•Plug the provided micro USB cable into the
charging port on the back of the device.
•Plug the other end of the micro USB cable
into the provided 12 V adapter to charge the
device in your car.
•You can connect the micro USB cable to any
other charger to charge the device at your
own responsibility.
•The device takes about 3 hours to fully
charge.
HOW TO USE?
•Press and hold the on/off (5) button for 2
seconds to turn on the device. A blue light
starts flashing (7). A voice will tell you that
the device is now on.
•Press and hold the on/off (5) button for two
seconds to turn off the device. The blue light
stops flashing and the voice will tell you that
the device is powering off.
•To install the device on your sun visor, slide
the sun visor mount into the notch on the
back side of the device. Attach the mount
onto your car’s sun visor.
OPAIRING THE DEVICE WITH YOUR
PHONE
•When you use the device for the first time,
you will have to pair it with your phone.

•Turn the device on. It automatically starts to
transmit a Bluetooth signal. If it does not
receive a connection within 3 minutes, it will
power off.
•Turn your phone’s Bluetooth on and find the
device among available devices (BT-YHQ01).
•Accept all permissions and your phone will
connect to the device.
•You can now receive/make calls and listen to
music over the built-in speaker.
•You must have your phone’s Bluetooth
turned on to use the device!
•Once your phone and the device are paired,
you must forget the device on your phone to
pair it with another.
•After the initial pairing, anytime you turn on
the device, it will automatically connect to
your phone if you have Bluetooth turned on.
ORECEIVING AND MAKING CALLS
•Press the green phone button (7) once to
accept an incoming call.
•Press and hold the button (7) for 2 seconds
to reject an incoming call.
•Press the button (7) twice quickly to call the
last person in your phone’s call history.
•While on a call, press the voice mode button
(6) once to change the mode to your phone’s
speaker for a more private call. To change
the mode back to the device’s speaker, press
the voice mode button (6) again. This only
works during a call.
OMUSIC AND MEDIA
•You can listen to music through the speaker
of the device.
•Press the green button (7) to pause/play the
music from your phone.
•To increase the volume of the speaker, press
and hold the volume + button (3).
•To decrease the volume of the speaker,
press and hold the volume - button (2).
•To play the next song, press the volume +
button (3) once.
•To play the previous song, press the
volume - button (2) once.
WARNINGS
•Do not submerge in water.
•This device is not a toy. Store out of reach of
children.
•Use this product only for its intended
purpose. Do not use attachments of any
kind.
•This appliance has no user serviceable
components. Do not disassemble.
•Turn off when not in use.
•When not used for a long period of time,
store in a dry, dark place and keep away
from extreme temperatures (lower than -10
°C or higher than 50 °C).
WARRANTY
The warranty is valid for 24 months. You can claim it
from DFVU d.o.o., Liparjeva 6a, 1234 Mengeš,
Slovenia, for a replacement product or a refund.
Send us your order number and purchase date in the
email, which is available by clicking on our logo in the
bottom right corner. The product has a lifetime of 24
months from the date of collection.
WEEE disposal and recycling symbol.
The WEEE symbol is attached to the
product in compliance with the EU
directive 2012/19/EU on Waste
Electrical and Electronic Equipment
(WEEE). It is intended to deter the
improper disposal of this product and
to promote reuse and recycling.