-
APPLICATION AND USE
WHAT DO I NEED TO INSTALL IT
•
•
•
•
CORRECT INSTALLATION
-
base; for their use, all safety prescriptions reported on the
-
-
unplugged them from the system at the end of the cle-
Check in the first place (if possible) if there is enough
-
rantee the passage for the acid solution, otherwise the
-
le, empty it from the internal water and then connect it
tank (please notice that operational temperature du-
Connect the pump to the mains; switch it on and start
adding slowly descaling chemical, until required con-
-
-
-
ATTENTION:
-
solution inside the pump with clean water and rinse the de-
