Mara LIBRO User manual

COMPONENTI D’ARREDO –FUNRITURE AND COMPONENTS
MARA s.r.l. 25050 PASSIRANO (BS) Via Adua, 11 (Z.I.) –ITALY –Tel. [phone] –Fax [phone]
http://www.marasrl.it –E-mail: [e-mail] Posta elettronica certificata: [e-mail]
Cap. Soc. 51.480 € –P.IVA 01990190173 –R.E.A. BS 283594
INSTRUCTION MANUAL
LIBRO –FOLDING TABLE ON CASTORS
ART.286
1- GENERAL CONDITIONS
For proper use of the product, carefully refer to the following manual:
Keep the box in which the product is packed away from any heat source as the packaging is
made of cardboard.
MARA Srl is not responsible for damages, personal injuries, or any problem if it is caused or related to
the incorrect installation and/or use of the product.
Always pay close attention to the presence of moving parts that could cause injuries to things or
people.
Always pay attention to the presence of children.
List of components included in the product box:
•1 table frame
•2 sets of lock latches
•12 screws + 12 washers for assembling of the top to the frame +
4 screws + 4 plastic cover for anti-shock spring +
24 wood screws for assembling of the lock latches to the table tops
•1 assembly instruction + 1 blocking pin and 1 instruction use sticker
2- PRIOR TO EVERY USE
Always check the state of wear of the product in order to ensure complete safety for things and
people. Check the correct assembly of the product.
3- METHOD OF USE
TO OPEN THE TABLE
Check there are no obstacles around the table and enough space to open it.
The user must stand next to the closed table, facing the tops in symmetrical position
The user must carefully hold the table tops and slowly distance them, helping the table to open.
While the table opens, the user must guide and hold the table tops with his hands.
When the table is completely opened, the user must lock the latches placed under the table tops.
When the table is in the operative position, the user must lock the 4 castors.
TO CLOSE THE TABLE
Check there are no obstacles below the table.
The user must unlock the 4 castors.
The user must unlock the lock latches placed under the table tops.
The user must stand next to the table, facing the point where the tops meet.
The user must open his arms and lift the tops, guiding and moving them closer towards the vertical
position.
The pre-charged spring helps the user in this movement and automatically stops the table at the
end of the movement in the closed position.
For ASSEMBLY INSTRUCTION and INSTRUCTION USE refer to the related manual and sticker included
in the product box. The ASSEMBLY INSTRUCTION manual and the INSTRUCTION USER sticker are
integral part of this manual.
The product is not suitable for outdoor use.
See next page

COMPONENTI D’ARREDO –FUNRITURE AND COMPONENTS
MARA s.r.l. 25050 PASSIRANO (BS) Via Adua, 11 (Z.I.) –ITALY –Tel. [phone] –Fax [phone]
http://www.marasrl.it –E-mail: [e-mail] Posta elettronica certificata: [e-mail]
Cap. Soc. 51.480 € –P.IVA 01990190173 –R.E.A. BS 283594
4- MAINTENANCE
The product is carefully verified at the moment of the packing.
We suggest to complete a security check at least every month to verify the correct suitability for
use of your product.
5- CLEANING
Clean using only a damp cloth and neutral soap. Dry thoroughly before use. Use water at a
temperature not exceeding 30°C. Do not use water jet or steam washing machines.
Never use acids, alkalines or solvents such as acetone or diluent.
6- TECHNICAL CHARACTERISTICS
Materials and components:
Frame of mild steel tube and mild steel sheet. MIG and TIG welding.
Powder coated or chromed components.
PP covers and bungs.
Galvanized screws and washers
7- WARRANTY
The product is warranted against defects in materials or production for a period of two (2) years
from the invoice date, considering exclusions and limitations as specified below.
This warranty is not valid in case of misuse, abuse or modification of the product and failure to
follow the indicated instructions. MARA Srl is not responsible for damages, personal injuries, or any
problem if it is caused or related to the incorrect installation and/or use of the product.
The product is not guaranteed against damage or defects in the following conditions: natural
disasters, incorrect maintenance or repair, use of improper parts or components not supplied by
MARA Srl, lack of adherence to guidelines and use instructions, unauthorized modification, shipping
damages, or from failure to instructions indicated in the manual.
Any damage due to normal use of the product is not covered by guarantee.
8- REPAIRS
Warranty Repair
In case of defects or damages during the warranty period, MARA Srl evaluates with the customer if
the product defect is covered by warranty. MARA Srl, in its sole discretion, may replace or repair
the product under warranty shipped by the client to our head office. The labor costs related to
repair of the product can be borne by MARA Srl if it is determined that the repair is under warranty.
A repair or replacement does not renew or extend the warranty.
Repair of a product not covered by warranty
A product not covered by warranty can be repaired or replaced only after receiving prior
authorization from MARA Srl. The labor and shipping costs related to repair or replacement not
covered by the warranty will be fully borne by the customer.
Non-defective products
The customer will be notified if, after examining a returned product, MARA Srl verifies that the
product is not defective. The product will be returned to the customer and will be liable to pay the
return shipping costs.
9- DISCLAIMERS
Except for conditions stated in this document and within legal limits, MARA Srl does not offer any
other warranty or further condition.
The duration of any warranty that may be imposed by law is limited to the warranty period
indicated in this document. This guarantee is subject to change without prior notice.