Marathon SALICE F70 User manual

800.840.1228 /MARATHONHARDWARE.COM 800.840.1228 /MARATHONHARDWARE.COM
Technical Specications & Assembly
Salice F70 Undermount
What’s In the Box
 77kg (170lbs) Static Load Capacity; 70kg (154lbs) Dy-
namic Load Capacity
 Full-extension with a synchronized mechanism
 Soft-close or push to open versions
 Enhanced smooth soft-closing action
 Available in full range of lengths 350mm - 750mm
 Tool free height adjustments +2.5mm, depth
adjustments +/-3mm, side adjustments +/-1.5mm and
optional tilt adjustment +3mm
 Elongated holes for added depth and height
adjustment
 Optional synchronizer kit for push-open, optimizes the
opening movement of wider drawers
Product Features
 Set of left and right side slides
 Sold Separately - Front fixing brackets
 Optional:
Tilt adjustment levers
Push synchronizer kit
F70
F70 Soft-Close Undermount Ordering Guide
Part# Length Qty/Box
SG7E6S350XXB 350mm 6
SG7E6S400XXB 400mm 6
SG7E6S450XXB 450mm 6
SG7E6S500XXB 500mm 6
SG7E6S550XXB 550mm 6
SG7E6S600XXB 600mm 4
SG7E6S650XXB 650mm 4
SG7E6S700XXB 700mm 4
SG7E6S750XXB 750mm 4
Part# Length Qty/Box
SG7E6P350XXB 350mm 6
SG7E6P400XXB 400mm 6
SG7E6P450XXB 450mm 6
SG7E6P500XXB 500mm 6
SG7E6P550XXB 550mm 6
SG7E6P600XXB 600mm 4
SG7E6P650XXB 650mm 4
SG7E6P700XXB 700mm 4
SG7E6P750XXB 750mm 4
F70 Push-Open Undermount Ordering Guide
Accessory Items
Part# Description Quantity/Box
SAFCEX43B Salice F70 Narrow Clip L/R pair
SAFCGXX3B Salice F70 Clip Standard Mount L/R pair
SAGLRXX3F Salice F70 Tilt Adjustment Lever L/R pair
SAPKF7X51150 Salice F70 Push Synchronizer Kit 1
SSGD704UGXA Salice F70 Drilling Template 1

800.840.1228 /MARATHONHARDWARE.COM
Technical Specications & Assembly
Mounting Full-extension Slide on the Cabinet Side
Elongated Hole (additional height and depth adjustments)
Drilling Pattern
10 9 9
37
9 32
9.5
99 9
14
32
Setback 2
12
ø7
ø6.3
-0.2
ø7 +0.5
-0.2
ø4
ø 6.3
38
Mounting full-extension runner on the cabinet side
Fixing
The oval slots on the runners enable a depth adjustment of +/- 4.5 mm and a height adjustment of +/- 6 mm to be made.
Adjustments, see page 17).
EUROSCREW
Pre-drilling ø 5 mm
If runners are mounted before the assembly of the cabinet, we recommend that the inset position of the runner be increased from
to accommodate the manufacturing tolerances in the cabinet and the runner.
+/- 4.5
+/- 4.5
+/- 6
Drilling positions for runner on cabinet side
350
400
450
500
550
600
650
700
750
2350
38
10
37
MIN 360
MIN 410
400
38
37
450
MIN 460
37
14
500
37
550
37
MIN 560
MIN 510
12
64
MIN 610
37
MIN 660
600
650
37
64
MIN 710
37
700
750
MIN 760
37 416
416
10
38
10
38
3838
38
38
38
10
10
10
10
10
10
14
32 32
32
32
416
96
320
320
320
256
256
256
88
49
65
103
10 9 9
37
9 32
9.5
99 9
14
32
Setback 2
12
ø7
ø6.3
-0.2
ø7 +0.5
-0.2
ø4
ø 6.3
38
Mounting full-extension runner on the cabinet side
Fixing
The oval slots on the runners enable a depth adjustment of +/- 4.5 mm and a height adjustment of +/- 6 mm to be made.
Adjustments, see page 17).
EUROSCREW
Pre-drilling ø 5 mm
If runners are mounted before the assembly of the cabinet, we recommend that the inset position of the runner be increased from
to accommodate the manufacturing tolerances in the cabinet and the runner.
+/- 4.5
+/- 4.5
+/- 6
Installation Dimensions
16 MAX
21
13 MAX
38
1226
9.5
28.5
21
(X) Internal width of the cabinet
X - 42 mm to - 43.5 mm
Drawer Height = opening height minus 21 6 Minimum top
LN - 10
ø 6x107
95 mm MIN
11
LN - 10
ø 6x107
11
A
A
REAR HOOK REAR NOTCH
with Smove
and Push runners
REAR NOTCH
with
Push Synchronizer and
tilt adjustment lever
3-SIDED drawer
4-SIDED drawer
40 mm MIN
rear notch 75 mm MIN
rear notch
LN - 10
ø 6x107
11
A
A
11
ø6x 10
13 MAX
7
11
ø6 x 10
13 MAX
7
11
ø6x 10
13 MAX
7
11
ø6 x 10
13 MAX
7
A
F70

800.840.1228 /MARATHONHARDWARE.COM 800.840.1228 /MARATHONHARDWARE.COM
Drilling Pattern
Technical Specications & Assembly
F70
Side Adjustment +/- 1.5 mm
Rotate the white wheel towards the back of the drawer to adjust right.
Rotate the white wheel towards the drawer front to adjust left.
Side adjustment +/- 1.5 mm
Rotate the white wheel towards the inside of the drawer to reduce
the gap between the front and the side.
Depth adjustment +/- 3 mm
Rotate the white wheel towards the outside of the drawer to
increase the gap between the front and the side.
Height Adjustment + 2.5 mm
Push the lever towards the inside of the drawer to achieve height adjustmen
t.
This operation is tool free.
+
-
=
=
2.5 mm
Push the lever towards the inside of the drawer to achieve height adjustment.
This operation is tool free.
+
-
=
=
2.5 mm
Tilt Adjustment + 3 mm
Open the drawer and press
the lever to achieve the
adjustment. This operation is tool free.
Pull out the drawer and remove
the plastic insert
Insert the tilt adjustment levers, both
right and left
Rotate the lever to achieve the required adjustment
1
2
2
1
+ 3 mm
Depth Adjustment +/- 3 mm

800.840.1228 /MARATHONHARDWARE.COM
Technical Specications & Assembly
Assembly of Tilt Adjustment Lever (Optional)
Open the drawer and press
the lever to achieve the
adjustment. This operation is tool free.
Pull out the drawer and remove
the plastic insert
Insert the tilt adjustment levers, both
right and left
Rotate the lever to achieve the required adjustment
1
2
2
1
+ 3 mm
F70
Drawer Assembly & Removal
AFCGXX3B
Right and left clip with
integrated adjustments
F70 - Clips - Locking devices
- For all F70 runner versions
- Material: plastic and steel
- Integrated tool-free side and
depth adjustments
- Recommended pre-drilling ø 2.5 mm
- Mounts to the bottom or to
the drawer front
Assembly to the drawer bottom Assembly to the drawer front
Fix with the screws,
as indicated
(recommended screws
ø 4 x 16 mm)
Fix with the screws,
as indicated
(recommended screws
ø 4 x 16 mm)
97
95 min.
6
51 23
111
59 23
7
1 1
2
2 2
2
Position hands under the front of the drawer and press on the orange levers, as indicated in the drawing, sliding
the drawer out of the cabinet.
Place the drawer on the runners and push forward until completely closed
Drawer assembly
Drawer removal
11
1 1
2
2 2
2
Position hands under the front of the drawer and press on the orange levers, as indicated in the drawing, sliding
the drawer out of the cabinet.
Place the drawer on the runners and push forward until completely closed
Drawer assembly
Drawer removal
11
Drawer Assembly Drawer Removal

800.840.1228 /MARATHONHARDWARE.COM 800.840.1228 /MARATHONHARDWARE.COM
Cut the synchronizer bar to length
Assembly instructions
Insert and slide the carrier plates into position on the runners in the direction indicated by the arrows
(X - 155mm) ±1
X
75mm min
X = Internal width of the cabinet
75mm min
Assembly of Push Synchronizer Kit (Optional)
Technical Specications & Assembly
Cut the synchronizer bar to length
Assembly instructions
Insert and slide the carrier plates into position on the runners in the direction indicated by the arrows
(X - 155mm) ±1
X
75mm min
X = Internal width of the cabinet
75mm min
F70
Cut the synchronizer bar to length
Assembly instructions
Insert and slide the carrier plates into position on the runners in the direction indicated by the arrows
(X - 155mm) ±1
X
75mm min
X = Internal width of the cabinet
75mm min