Marathon MSAR AUTO WW194026 User manual

MSAR AUTO™
MEDIUM SEARCH AND RESCUE AUTOMATIC MANUAL WW194026
SWISS MADE. |CANADIAN DESIGNED. WATCH, WRIST: DIVE 30ATM

MEDIUM SEARCH AND RESCUE AUTOMATIC (MSAR AUTO)
Marathon’s 36mm Diver’s Medium Automatic (MSAR) is Swiss-crafted with all the
power and durability of its larger counterpart. The MSAR Automatic is optimized for
the toughest environments and built to military specications. Manufactured with
a 26-jewel Swiss automatic movement and shelled in a durable 316L stainless steel
case, Marathon’s MSAR dive watch delivers precision accuracy in a dependable,
compact design.

Case Diameter
Case Thickness
Lug to Lug
Drilled Lug Width
36mm
14mm
43.5mm
18mm
SPECIFICATIONS TRITIUM HOUR MARKERS
MINUTE HAND WITH TRITIUM TUBES
HOUR HAND WITH TRITIUM TUBES SCREW-DOWN CROWN
SECONDS HAND
BEZEL
20MM LUGS
BEZEL MARKER WITH MARAGLO™
DATE

TECHNICAL INFORMATION
Movement
Number of Jewels
Submersibility
Case
Crystal Type
Marathon M2 Self-Winding Automatic
26
30 ATM – 300 meters (1000 feet)
316L Stainless Steel
Sapphire
Crown Type
Bezel Type
Scale Quantity
Scale Range
Luminous Features
Calendar
Screw-Down
Uni-Directional
2
1 - 12 (13 - 24)
Tritium Gas Tubes & MaraGlo™
Date

WATER RESISTANCETRITIUM GAS TUBES
30 ATM – 300 M (1000 FT)CONSTANT ILLUMINATION
The MSAR Auto is made from 316L surgical-grade stainless-steel with a
screw-down crown and a synthetic sapphire crystal that allow it to operate
while submerged down to 300 meters or 1000 feet underwater.
The MSAR Auto uses self-contained tritium gas tubes to ensure constant
visibility in low light situations. A gas tube is placed on each hour marker
and hand. These tubes are self-illuminating and contain an isotope of
hydrogen, that will not dull down over time like photo-luminescent paint.

SWISS CRAFTMANSHIPSHOCK RESISTANCE
LA CHAUX-DE-FONDS, SWITZERLANDIncabloc® Shock Protection
Inside the MSAR Auto automatic is a Swiss-made, 26 jewels Marathon
M2 Self-Winding Automatic. These watches are hand-assembled in
La Chaux-de-Fonds, Switzerland and guarantee the highest level of
craftsmanship and accuracy.
For over 80 years Marathon has used Incabloc® shock absorbers to
protect the Marathon engine. This watch combines Military toughness
with Swiss craftsmanship in a watch that will get the job done, and look
good doing it.

1SETTING THE TIME
1. Unscrew and pull the crown from position 1 to position 4.
2. Turn the crown clockwise to adjust the time.
3. Ensure correct AM/PM settings so that the date wheel changes
at midnight and not mid-day.
234

SETTING THE DATE
1. Unscrew and pull the crown from position 1 to position 3.
2. Turn the crown clockwise to change the date.
CAUTION: Do not adjust the date wheel between 9pm and 3am as this may
damage the watch movement.
2341

LOCKING THE CROWN
From position 2, push the crown into position 1 and rotate clockwise to lock the
crown back into place.
NOTE: The MSAR Auto was designed to automatically hand-wind the watch while
screwing in the crown. Avoid hand-winding where necessary as this could cause
damage to the movement.
Ensure the crown is completely screwed down in position 1
for optimal water-resistance.
23 41

TIMING BEZEL
1. Rotate your bezel counterclockwise and align the 12 o'clock bezel marker with
the minute hand. This will set your start time.
2. Measure the minute hand against the bezel markers to count the elapsed time.
NOTE: When diving, use your dive watch as a support device alongside the
recommended diving tools suggested by PADI or BSAC.
Rotate bezel counterclockwise, aligning the 12 o'clock bezel
marker with the minute hand to set a starting time.

1. Priming the movement.
Your MSAR Auto is charged via the movement of your wrist. Out of the box, gently
move your watch back and forth to charge up the movement. Avoid hand-winding
where necessary, as this could cause damage to the movement.
2. Clean watch often.
Clean regularly using rubbing alcohol, a toothbrush and a microbre cloth.
GENERAL OPERATIONS & MAINTENANCE 3. Always set it forward.
During events such as daylight-savings, you might be inclined to wind your
watch back an hour, however this can put undue stress on the movement of your
watch. Always move the hands forward to reach your desired time setting.
4. Service regularly.
Regular servicing every four to six years will help to keep your movement
running with Marathon-level precision. For servicing requests, contact our team
directly at [email protected]

Every newly purchased Marathon Watch comes with a International warranty
covering the timepiece for any manufacturing defects within the rst two-years
of its life.
Our expert team at [email protected] is dedicated to making sure
your timepiece is running in tip-top shape.
WARRANTY & SUPPORT
Marathon Watch Company Ltd. warrants this item to be free from defects in material
and workmanship under normal use in accordance with care and usage instructions
for 2 years from date of purchase from an authorized distributor. This warranty
excludes damage from misuse, abuse or any irregular application. If we conrm a
defect, we will repair or replace it with the same item or one of similar value and
return it to you at no-charge.

Marathon Watch has remained family owned and operated since our founding
in 1939. This watch has been hand assembled by our team with the utmost
craftsmanship and care.
Mitchell Wein,
President
Mitchl Wein

MSAR AUTO™
MANUEL DE RECHERCHE ET SAUVETAGE MOYEN AUTOMATIQUE WW194026
FABRIQUÉ EN SUISSE. |CONÇU AU CANADA. MONTRE, POIGNET : PLONGER 30ATM

RECHERCHE ET SAUVETAGE MOYEN AUTOMATIQUE (MSAR AUTO)
La Montre de Plongée Automatique Moyenne de 36 mm (MSAR) de Marathon est
fabriquée en Suisse et contient toute la puissance et la durabilité de sa grande sœur.
La MSAR Automatique est optimisée pour les environnements les plus difciles
et construite selon des spécications militaires. Fabriquée avec un mouvement
automatique suisse à 26 pierres et logée dans un boîtier durable en acier inoxydable
316L, la montre de plongée MSAR de Marathon offre une précision extrême dans un
design able et compact.

CARACTÉRISTIQUES
COURONNE VISSÉE
CORNES 2OMM
INDEX DE LUNETTE
AVEC MARAGLO™
DATE
Diamètre Du Boîtier
Épaisseur Du Boîtier
De Corne À Corne
Largeur Entre Les Cornes
41mm
14mm
48mm
20mm
INDEX DES HEURES
AVEC TRITIUM AIGUILLE DES MINUTES
AVEC TUBES DE TRITIUM
AIGUILLE DES HEURES
AVEC TUBES DE TRITIUM
AIGUILLE DES SECONDES
AVEC MARAGLO™
LUNETTE TOURNANTE
UNIDIRECTIONNELLE

INFORMATIONS TECHNIQUES
Mouvement
Nombre de rubis
Submersibilité
Boîtier
Type de Verre
Marathon M2 à Remontage Automatique
26
30 ATM – 300 mètres (1000 pieds)
Acier Inoxydable 316L
Saphir
Type de Couronne
Type de Lunette
Quantité d'Échelles
Plage d'Échelle
Caractéristiques Lumineuses
Calendrier
Vissée
Lunette Tournante Unidirectionnelle
2
1 - 12 (13 - 24)
Tubes de Gaz Tritium & Maraglo™
Date

TUBES DE GAZ TRITIUM
ÉCLAIRAGE CONSTANT
La MSAR Auto utilise des tubes au gaz tritium autonomes pour assurer
une visibilité constante dans des conditions de faible luminosité. Un
tube de gaz est placé sur chaque index et aiguille. Ces tubes sont
autoéclairants et contiennent un isotope d'hydrogène, qui ne ternit pas
au l du temps comme le fait la peinture photoluminescente.
RÉSISTANCE À L'EAU
30 ATM – 300 M (1000 PI)
La MSAR Auto est fabriquée en acier inoxydable 316L de qualité
chirurgicale avec une couronne vissée et un verre saphir synthétique qui
lui permettent de fonctionner en immersion jusqu'à 300 mètres ou 1000
pieds sous l'eau.

SAVOIR-FAIRE SUISSERÉSISTANCE AUX CHOCS
PROTECTION CONTRE LES CHOCS INCABLOC®
À l'intérieur de l'automatique MSAR Auto se trouve un Marathon
M2 à remontage automatique de 26 pierres fabriqué en Suisse. Ces
montres sont assemblées à la main à La Chaux-de-Fonds, en Suisse, et
garantissent le plus haut niveau de savoir-faire et de précision.
Depuis plus de 80 ans, Marathon utilise les amortisseurs de chocs
Incabloc® pour protéger le moteur Marathon. Ce modèle combine la
solidité militaire à l'expertise suisse dans une montre qui réalisera le travail,
et qui aura un très bel aspect en le faisant.
LA CHAUX-DE-FONDS, SWITZERLAND

11. Dévissez et tirez la couronne de la position 1 à la position 4.
2. Tournez la couronne dans le sens des aiguilles d'une montre pour régler l'heure.
3. Assurez-vous que les réglages AM/PM sont corrects an que la roue de
quantième change à minuit et non à midi.
234RÉGLAGE DE L'HEURE