Markankt HYBRID SOFA User manual

HYBRID SOFA INSTALLATION MANUAL
LAYOUT 1 LAYOUT 2
LAYOUT 3 LAYOUT 4
LAYOUT 5 LAYOUT 6
LAYOUT 7

INDEX
Chapter
HARDWARE
LAYOUT 1
LAYOUT 2
LAYOUT 3
LAYOUT 4
LAYOUT 5
LAYOUT 6
LAYOUT 7
page 1
page 2-8
page 9-17
page 18-26
page 27-31
page 32-40
page 41-53
page 54-58
Page

1
Cap screw M6 x 30mm
Power tool
Allenkey
Cap screw M6 x 40mm
Leveler
Button cap screw M8 x25mm
Self tapping screw
HARDWARE
*POWER TOOL, ALLEN KEY & LEVELER ARE NOT INCLUDED
JCBC Screw
Measuring Tape

HYBRID SOFA INSTALLATION
2
LAYOUT 1
STEP 1: Screw in both side of the leg and beam supporter.
STEP 2: Slot in the X-beam .

HYBRID SOFA INSTALLATION
3
STEP 3: Repeat Step 1 on the other leg installation. Insert in tapping screw on top of the longer leg.
STEP 4: Slot in the other end of X-beam to the other leg.

HYBRID SOFA INSTALLATION
4
STEP 5: Snap in click x seater to the X-beam.
STEP 6: Snap in click x bizz class box to the X-beam.
*Click this in to attach the seat.
*Hook in sofa connector.

HYBRID SOFA INSTALLATION
5
STEP 7: Slide out the upper top before installing the swivel top.
STEP 8: Install swivel top to the bizz class box by using a tapping screw to tighten it.
*swivel top installation
*tapping screw

HYBRID SOFA INSTALLATION
6
STEP 9: Slide back in the upper top to complete the swivel top installation.
STEP 10: Add in J bracket at the bottom of the seat.
*J-bracket

HYBRID SOFA INSTALLATION
7
STEP 11: Insert back panel to the seater. Hook in lockplate to the mushroom.
STEP 12: Hook in lock plate to connect side screen to the seater.
*Mushroom
*Lockplate
*Lockplate
*Mushroom

HYBRID SOFA INSTALLATION
8
STEP 13: Repeat Step 12 to connect side screen to the other end of the seater.
Finally, screw and tighten the J-hook to the panel after all panels are placed.
THE INSTALLATION FOR LAYOUT 1 IS COMPLETE.
*Lockplate
*Mushroom
*Screw J-hook

HYBRID SOFA INSTALLATION
9
LAYOUT 2
STEP 1: Set up the frame (refer to layout 1) Connect X beam to the seat support connectors.
STEP 2: Put in the rst seater on the X beam.
Do not tighten set screw
Tighten set screw
Do not tighten set screw
Tighten set screw

HYBRID SOFA INSTALLATION
10
The installation for the seat 1 is done.
STEP 3: Snap in click x to the X beam.

HYBRID SOFA INSTALLATION
11
STEP 5: Repeat step 2-3 to install seat 3.
STEP 4: Repeat step 2-3 to install seat 2.
*Hook in sofa connector.

HYBRID SOFA INSTALLATION
12
STEP 7: Repeat step 2-3 to install seat 5.
STEP 6: Repeat step 2-3 to install seat 4 together with the swivel top (refer to layout 1 for swivel top installation).

HYBRID SOFA INSTALLATION
13
STEP 9: Add in J bracket at the bottom of each seat.
STEP 8: Repeat step 2-3 to install seat 6.
*J bracket
*Hook in sofa connector.

HYBRID SOFA INSTALLATION
14
The installation for the back panel on seat 1 is done.
STEP 10: Insert back panel to the seaters. Hook in lockplate to the mushroom.
*Lockplate
*Mushroom

HYBRID SOFA INSTALLATION
15
STEP 12: Repeat step 10 to install back panel for seat 3,4 and 5.
STEP 11: Repeat step 10 to install back panel for seat 2.

HYBRID SOFA INSTALLATION
16
STEP 14: Hook in lock plate to connect side screen to seater.
Finally, screw and tighten the J-hook to the panel after all panels are placed.
STEP 13: Repeat step 10 to install back panel for seat 6.
*Lockplate
*Screw J-hook
*Mushroom

HYBRID SOFA INSTALLATION
17
THE INSTALLATION FOR LAYOUT 2 IS COMPLETE.
* Push legs in as far as possible (until
they hit the 'click-x') and then tighten
set screw at the end leg
* Push legs in as far as possible (until
they hit the 'click-x') and then tighten
set screw at the end leg