MARS GAMING MM2 User manual

"
"
"
"
"
"
"
"
"
"
OCTU"Icmkpi"uqhvyctg"kpuvcnncvkqp"cpf"mcpwcn"

Please connect your MARS GAMING MM2 mouse to the PC before the
software installation.
1. Please click the setup.exe to start the software installation.
2. Click Next and follow the steps.
3. Click Finish
There are three main sections in this mouse control software which are MAIN
CONTROL / COLOR CONTROL / ADVANCED CONTROL. In the lower part
of the software interface, you can create your own profile preferences and
save into one of the five profile slots.
OK: Save setting and close dialog box.
Cancel: Exit the dialog box without saving.
Apply: Make changes to take effect but not close the dialog box.
OCKP"EQPVTQN"
"
"
"
"
"
"
"

DWVVQP"CUUKIPOGPV"
User can assign each of the six keys in this mouse with a specific function by
selecting from a pull down menu. The functions are:
Cuukip"Ocetq< select and assign a recorded Macro to a key
Ownvkmgfkc< select and assign a media function to a key
ERK"uykvej1"ERK"wr< Executing dpi up function
ERK"uykvej1"ERK"fqyp< Executing dpi down function
Qhhkeg"hwpevkqpu< select and assign an office function to a key
Ykpfqyu< select and assign a Windows action to a key
Enkem<"Executing mouse click function
Ogpw<"Executing click function of standard right button.
Yjggn"Enkem<"Executing general rolling function of mouse.
Fqwdng/enkem< Executing mouse double-click action to a single key
Cuukip"c"ujqtvewv< assign a shortcut to a key
KG"Hqtyctf<"Executing the function of IE Forward.
KG"Dcemyctf< Executing the function of IE Backward.
Dwvvqp"qhh< Disable a key.
FRK"UYKVEJGT"
User can define four sets of DPI resolution by moving the bar from left to right.
The higher the DPI, the faster the cursor will move.
By checking the box on the left of the bar, you can cycle through the 4 sets of
DPI by clicking the DPI button on the mouse.
FQWDNG"ENKEM
User can define the speed needed between the two clicks to perform a
double-click action.

OCETQ"OCPCIGT"
1. Click MACRO MANAGER
2. Click NEW
3. Type in a new Macro name and press Enter
4. Click START RECORD and type in a combination of keys of your
preference.
5. Click STOP RECORD to stop recording. You can also set the number of
Loop Times.
6. Click OK

CFVCPEGF"EQPVTQN"
"
"
Advanced setting includes Vertical scroll speed, Polling rate, Pointer speed,
Pointer visibility and Driver reset.
Vgtvkecn"uetqnn"urggf< Adjust the wheel rolling speed
Rqnnkpi"tcvg< Setting the report rate of a mouse
Rqkpvgt"urggf< Adjust the pointer speed
Rqkpvgt"xkukdknkv{< Adjust the visibility of the pointer
Ftkxgt"tgugv< Reset to factory setting
Remember to click APPLY or OK in order for the setting to take effect.

EQNQT"EQPVTQN"
Inqdcn"nkijv"ugvvkpiu<"Executing LED on/off
C"nkijv"kpvgpukv{< Set the intensity of the LED light
C"nkijv"rwnucvkqp< Set the light pulsation speed
Remember to click APPLY or OK in order for the setting to take effect.