MARS GAMING mm3 User manual

Mars Gaming MM3 software installation and manual

System requirement:
* Compatible with Windows XP/Windows Vista/Windows 7/Windows 8
* One USB(1.1/2.0) port
* CD-ROM drive
* 50MB of available hard disk space
--------------------------------------------------------------------------------------------------------
Please connect your MARS GAMING MM3 mouse to the PC BEFORE the software
installation.
1. Please click the setup.exe to start the software installation.
2. Click Next and follow the steps.
3. Click Finish
There are six types of settings in this mouse control software which are Light settings,
Sensitivity settings, System settings, Advanced settings and Button settings. In the
lower part of the software interface, you can create your own profile preferences and
save into one of the five profile slots.
OK: Save setting and close dialog box.
Cancel: Exit the dialog box without saving.
Apply: Make changes to take effect but not close the dialog box.
Light settings

LIGHT Effect Switch:
On > to turn on the LED.
Off > to turn off the LED.
LIGHT Effect Type:
Full lightened > The LED will stay on at all time without flashing (Switch must be on)
Breathing > Set the light pulsation speed (Switch must be on)
Choose a Single Color:
When checked, the LED will stay on with a color selected from the color panel below.
When not checked, the LED with circle through all six colors.
Remember to click APPLY or OK in order for the setting to take effect.
Sensitivity settings
Sensitivity Options: set the sensitivity of the cursor in both X and Y axes. X and Y
axes can be set separately in different sensitivity level if the selection box is unchecked.
DPI Setting #1 to #5:
* Adjust DPI
* Enabling and disabling any of the five DPI settings
* Selecting a default DPI setting
Remember to click APPLY or OK in order for the setting to take effect.

System settings
Double Click:
User can define the speed needed between the two clicks to perform a double-click
action.
Windows Pointer Speed:
Adjust the pointer speed
Enhance pointer precision:
Fine-tuning the pointer
Tilt wheel scroll speed:
Adjust the pointer speed
Mouse wheel scroll speed:
Adjust the wheel rolling speed.
1 Page:
When checked, will scroll one full page at a time.

Advanced settings
Polling Rate:
Setting the report rate of a mouse
On-To-Go Speed:
Adjust the pointer acceleration speed

Button settings
User can assign each of the 10 keys in this mouse with a specific function by selecting
from a pull down menu. The functions are:
Assign Macro:Assign a recorded macro to a button.
Multimedia: Select and assign a media function to a key
Profile: Switch between saved profiles
Windows:Select and assign a Windows function to a key
Click: Executing mouse click function
Menu:Activate a menu
Wheel click: Executing the scroll wheel click function
Double-click:Executing the double click function
Assign a shortcut: assign a shortcut to a key
Button off: Disable a key.
IE Forward: Executing the function of IE Forward.
IE Backward: Executing the function of IE Backward.
Scroll up: Executing the function of scroll up action
Scroll down:Executing the function of scroll down action
Tilt Left: Executing the function of tilt left action
Tilt Right: Executing the function of tilt right action
Assign a launch:Click to launch a designated programme.
Fire button: Sets number of fire in one mouse click and the delay
time between each click

On-To-Go: Select an On-To-Go key
Windows key:click to activate Windows menu
Open driver: To quickly activate this software
MACRO MANAGER

1. Click MACRO MANAGER
2. Click NEW
3. Type in a new Macro name and press Enter
4. Click ○to start recording and type in a combination of keys of your preference.
You have the options to:
* Record delays between each key
* You can also set the number of Loop Times.
5. Click ○again to stop recording.
6. Click OK