Marshall Amplification CV380-CS User manual

Broadcast A/V Division
User Manual
CV380-CS
True 4k30 Compact Camera

1
Table of Contents
Table of Contents
8. Special
4. AE Control
2. OSD Joystick and Button
6. Audio
1. Menu Structure
9. Setup
10. Reset
11. E xit
12. Troubleshooting
Warranty
5. Day / Night
3. WB Control
7. Image Control
01
10
06
02
08
02
11
12
13
14
END
07
05
09

CV380-CS Manual
www.marshall-usa.com 2
1. Menu Structure
SETUP
ATW
AWB
ONE PUSH
INDOOR
BLUE
AGC MAX
SENS UP
AE BRIGHT
FLK CONTROL
SHUTTER
AGC MAX
SENS UP
AE BRIGHT
FLK CONTROL
IRIS
AGC MAX
SENS UP
AE BRIGHT
FLK CONTROL
SHUTTER
IRIS
AGC
SENS UP
RED
OUTDOOR
AUTO
SHUT FIX
IRIS FIX
AGC FIX
MANUAL
MANUAL
AE CONTROL
CONTROL
WB
AGC
SENS UP
AE BRIGHT
FLK CONTROL
SUB MENU SUB MENU

3
HUE
IMAGE
CONTROL
SPECIAL
AUDIO
EDGE ENHANCE
AUTO EDGE
AUTO SATURATE
BLACK LEVEL
GAMMA CORRECT
DNR MODE
DNR LEVEL
DNR
DZOOM
DEFOG
BACKLIGHT
BINNING
DEFECT PIXEL
DISP FUNCTION
FLICKER DETECT
SAMPLE BITS
AE CONTROL
DAY/NIGHT
MANUAL
DAY
NIGHT
MIC/LINE
AUDIO LEVEL
MIC ATTENUATOR
LENS SHADING
CONTRAST
BRIGHTNESS
SATURATION
FLK CONTROL
NIGHT COLOR
COLOR BURST
SUB MENU SUB MENUSETUP
DIS

CV380-CS Manual
www.marshall-usa.com 4
SPECIAL
SETUP
RESET
EXIT
PRIVACY
CAM TITLE
COMMUNICATION
SYSTEM INFO
OUTPUT FORMAT
USER/FACTORY
RS-485/ID
2. OSD Joystick and Button
Press SET button to access the MAIN MENU.
..
SET
Used to access the menu and confirm selection.
Used to move the cursor up.
Used to move the cursor to left and change the value.
Used to move the cursor to right and change the value.
Used to move the cursor down
UP
DOWN
RIGHT
LEFT
Icon indicates “Press OSD Button” or “Enter Sub Menu”
.
>
SUB MENU SUB MENUSETUP
WB CONTROL
AE CONTROL
DAY/NIGHT
AUDIO
IMAGE CONTROL
SPECIAL
SETUP
RESET
EXIT
AUTO
>
AUTO>
>
>
OFF
>
ON>
MENU
Use the LEFT & RIGHT buttons
to change the sub-item
Use the UP & DOWN buttons to
select the desired item
CV380-CSI/O Cable for CV380-CS
U
D
R
L
LINE IN
MIC IN

5
3. WB CONTROL
• AUTO: Controls the automatic adjustment of the light source’s color temperature from 3,000°K
~ 8,000°K.
• ATW: Continuously adjusts camera color balance in accordance with any change in color
temperature. Compensates for color temperature changes within the range of 1,900°K to
11,000°K.
• PUSH: Color temperature will be manually adjusted by pushing the OSD button. Place the
white paper in front of the camera when OSD button is pressed to obtain optimum result.
• MANUAL: Select this to fine-tune White Balance manually.
• You can adjust the blue and red tone level manually.
1. BLUE: Adjust the Blue tone of the image. (0~20)
2. RED: Adjust the Red tone of the image. (0~20)
• INDOOR: Select this to adjust white balance to indoor lighting condition.
• OUTDOOR: Select this to adjust white balance to outdoor lighting condition.
WB CONTROL
AE CONTROL
DAY/NIGHT
AUDIO
IMAGE CONTROL
SPECIAL
SETUP
RESET
EXIT
MODE
BLUE
RED
RETURN
MANUAL
>
AUTO>
>
>
OFF
>
ON>
PUSH
10
10
>
MENU WB CONTROL
1. Adjust White Balance first by using the AUTO or ATW mode before switching to MANUAL
mode.
2. White Balance may not work properly under the following conditions. In this case, select the
ATW mode.
• When the ambient illumination of the subject is dim.
• If the camera is directed towards a fluorescent light or installed in a place where
illumination changes dramatically, the White Balance operation may become unstable.
Select WB CONTROL using the UP or DOWN button. You can change between AUTO, ATW, PUSH,
and MANUAL using the LEFT or RIGHT buttons.

CV380-CS Manual
www.marshall-usa.com 6
4. AE CONTROL
• AUTO: Adjusts the exposure level automatically. Detailed fine tuning options are available
under this menu.
• SHUT FIX: Provides more detailed shutter speed options. All other controls are tuned for the
selected shutter speed.
• IRIS FIX: Provides more detailed iris control options. All other controls are tuned for the
selected iris setting.
• AGC FIX: Provides more detailed gain option. All other controls are tuned for the selected gain
value.
1. SHUTTER: Speed can be set at auto or manual. (1/30~1/10,000)
2. AGC MAX: Used to set maximum gain value to control the video noise caused by Auto
Gain Control. (Off, Low, Middle, High, DMIN, DMID, DMAX)
3. SENS UP: Controls the digital slow shutter to allow extra light into the camera and adjust
the picture quality. (Off, x2~x10)
4. AE BRIGHT: Select this to adjust auto exposure brightness levels. (0~10)
5. IRIS SPEED: Electronic Iris speed can be controlled, for DC Iris lens only. (0~5)
6. LENS MODE: Lens setting will be optimized for selected enviornment, for DC Iris lens only.
7. FLK CONTROL: Provides a proper image sensor frequency to match the power frequency
in order to minimize video flicker.
WB CONTROL
AE CONTROL
DAY/NIGHT
AUDIO
IMAGE CONTROL
SPECIAL
SETUP
RESET
EXIT
MODE
SHUT FIX
IRIS FIX
AGC FIX
RETURN
MANUAL
>
AUTO
>
>
OFF
>
ON>
AUTO
>
MENU AE CONTROL
Select AE CONTROL using the UP or DOWN button. You can select one sub-mode using the UP or
DOWN buttons.

7
MODE: Set camera to either color mode or B&W mode. (Day, Night)
DAY: When set to DAY mode, camera stays in color and IR cut filter is engaged.
NIGHT: When set to NIGHT mode, camera stays in B&W and IR cut filter is removed.
• NIGHT COLOR: When on, camera stays on color mode. Night (B&W) can be selected from
this mode. (On, Off)
• COLOR BURST: Signal ON or OFF can be set for CVBS signal. (On, Off)
WB CONTROL
AE CONTROL
DAY/NIGHT
AUDIO
IMAGE CONTROL
SPECIAL
SETUP
RESET
EXIT
MODE
NIGHT COLOR
COLOR BURST
RETURN
MANUAL
>
AUTO
>
>
OFF
>
ON>
DAY (COLOR)
>
MENU DAY/NIGHT
5. DAY / NIGHT
Select DAY / NIGHT using the UP or DOWN button. You can select one sub-mode from AUTO,
COLOR, and NIGHT using the UP or DOWN buttons.

CV380-CS Manual
www.marshall-usa.com 8
• MIC / LINE: When using audio microphone use MIC mode, when using other audio sources
use LINE setting
• AUDIO LEVEL: Select this to adjust audio levels manually.
• MIC ATTENUATOR : Audio attenuation can be controlled from this menu to minimize the
audio noise level
1. SAMPLE BITS: Select the bit depth of audio
WB CONTROL
AE CONTROL
DAY/NIGHT
AUDIO
IMAGE CONTROL
SPECIAL
SETUP
RESET
EXIT
MIC LINE
AUDIO LEVEL
MIC AT TENUATOR
SAMPLE BITS
RETURN
MANUAL
>
AUTO
>
>
OFF
>
ON>
24
24 BITS
>
MENU AUDIO
6. AUDIO
Select AUDIO using the UP or DOWN button and enter ON using SEL button. You can select one
sub-mode using the UP or DOWN buttons.

9
• LENS SHADING: Corrects inconsistent brightness level in the image.
• CONTRAST: Adjust the image contrast level.
• BRIGHTNESS: Adjust the image brightness level.
• SATURATION : Adjust the image saturation level.
• HUE: Adjust the image hue level.
• EDGE ENHANCE: Adjust the image sharpness level.
• AUTO SATURATE : Decrease saturation automatically when noise scene is detected.
• BLACK LEVEL: Adjust the image black level.
• GAMMA CORRECT: Adjust the image output gamma level.
• DNR: Reduces video noise at low ambient light.
Select the DNR level from OFF, LOW, MIDDLE, and HIGH using the LEFT or RIGHT button.
WB CONTROL
AE CONTROL
DAY/NIGHT
AUDIO
IMAGE CONTROL
SPECIAL
SETUP
RESET
EXIT
LENS SHADING
CONTRAST
BRIGHTNESS
SATURATION
HUE
EDGE ENHANCE
AUTO SATURATE
BLACK LEVEL
GAMMA CORRECT
DNR
RETURN
MANUAL
>
AUTO
>
>
OFF
>
ON>
OFF
10
10
10
0
5
MIDDLE
0
DEFAULT
>
MENU IMAGE CONTROL
7. IMAGE CONTROL
Select IMAGE CONTROL using the UP or DOWN button.
You can select LENS SHADING, CONTRAST, HUE, And EDGE ENHANCE using the UP or DOWN
buttons.