Martian mVoice User manual

pdfcrowd.com
user manual voice
MARTIAN VOICE SMARTWATCH USER GUIDE
Complete product user manual for Martian mVoice, Envoy, Alpha, Aviator, Electra, Passport,
Victory and G2G.
Save to PDF
GET STARTED
What's in the box
Mobile Device Compatibility
Setting The Time
Charging Your Watch
Turning On and Off
Check & Update Firmware
ShopmVoicemVipUse AlexaSupportBlog & Info

pdfcrowd.com
PAIR YOUR WATCH
Pairing Martian Watch to iOS
Pairing Martian Watch to Android
UNDERSTAND YOUR WATCH
Status Bar
Watch Menu
Music Mode
Volume
Light
Do Not Disturb (DND)
Camera Mode
Stopwatch
Find Phone
Setup Menu
Language
Date Format
LED Light
Leash
Gesture
A2DP
Firmware version
SETTING MARTIAN APP
Martian App for iPhone, iPad
Martian App for Android
USING MARTIAN WATCH
Using Voice Command
Calls
Text Messages
ADDITIONAL HELP
Master Reset

pdfcrowd.com
Factory Restore
Trouble Shooting
Safety, Regulatory and Legal
GET STARTED
Before you start using your MARTIAN VOICE COMMAND WATCH, make sure the following items
are in the box:
• Martian Watch
• Micro USB Cable
• Quick Connect Guide
Your mobile device’s operating system has an impact on the features on your watch
functionality. Please take note of iOS and Android differences below.
• Mobile Phones: The “talk and listen” feature of your watch will work with selected iPhone and
Android mobile phones that have Bluetooth wireless technology and a Hands-Free Profile (HFP).
How do you know if your mobile phone works with your watch? First find out if it has Bluetooth
connectivity. To know for sure, borrow a friend’s Bluetooth headset and pair it with your mobile
phone. If you can place a call by saying a name in your Contact list, or answer a call, and your
phone has a HFP, then your watch will work with your mobile phone for dialing and answering
features. To find out if your phone has a HFP, check the manufacturer’s technical specifications.
• Since your watch connects to your mobile device using Bluetooth technology, anything you can do
with your Bluetooth headset, you can do with your watch.
• To use the Voice Command features on your watch, you must have a compatible Voice
Command feature on your mobile device.
— Voice Command functions for Android are dependent upon your mobile device. If your mobile
device came with an integrated Voice Command app and works with a Bluetooth headset, it will
work with your watch.
— On iPhone 7, iPhone 7 Plus, iPhone SE, iPhone 6, iPhone 6 Plus, iPhone 5, iPhone 5s, iPhone
4s, and iPad, watch works with Siri. On iPhone 4 and iPhone 3GS, MARTIAN works with the
integrated Voice Controls.
• Text notification/display on the LED is supported with all mobile devices that have a MAP profile,
or by downloading the Martian Alerts App for Android. The MAP profile is available for all
compatible Apple products using iOS 9 or above.
• Email and social media notifications, world clock, and weather display are available for Android
and iOS devices upon download of the Martian Alerts App to your mobile device.

pdfcrowd.com
The watch crown (knob on right side of watch) is “out” to save battery during shipping. Rotate it to
set the time, then push it in until you hear a click.
Before you start using your watch, locate the micro USB cable included in the lower compartment
of the box. The charging cable can be plugged into your computer’s USB port or a power outlet via
a USB wall adapter (sold separately).
• A solid red light will appear when the watch is charging.
• A solid green light indicates the watch is fully charged.
Full charge is reached in approximately 2-3 hours when charging from the wall and approximately
3-4 hours when charging from your computer.
Note: Martian Watches are not compatible with quick charge adapters, it is recommended to use
adapters with output of 1A.
Warning: Due to the nature of the Lithium polymer rechargeable battery, a Martian Watches
lithium battery that is inactive for over one year may fall into a deep discharge state or could cause
the battery to permanently lose it’s ability to charge. For long-term storage, please be sure to
charge and discharge your Martian Watch at least once every six months to prevent a decrease in
battery performance; store your Martian Watch in a dry place with low humidity and at temperature
range of 10° C to 30° C, 50 to 90 F; avoid exposure to temperatures higher than 95 F (35° C).
Turning Your Watch On
Press and hold the Bottom Button for 2 seconds. When the watch comes on, you will see the word
“MARTIAN” in the display. If the watch does not turn on, it needs to be charged (see “Charging”).
Turning Your Watch Off
Press and hold the Bottom Button for 2 seconds. The red light will flash and the OLED will display
“Goodbye”.
As technology changes and adapts, so does your Martian Voice Command. The firmware on your
Martian watch is subject to new updates from time to time that may add new features, improve
functionality, and more. Visit the link below to confirm that your Martian Voice Command firmware
is up-to-date, and check back regularly to stay ahead of the pack.
Check Firmware
PAIR YOUR WATCH

pdfcrowd.com
Your watch has to be paired via Bluetooth with your mobile device before you can use it. It can only
be paired with one mobile device at a time.
Follow these steps to pair your watch to your iOS Mobile Device:
1. On your iOS Mobile Device:
a. Download the Martian mVoice App – Go to the App Store; search for
“Martian mVoice”. Do not download the ORANGE Martian Notifier App as it
will not work with your watch.
b. Turn on Bluetooth – Go to Settings > Bluetooth on your mobile device. Turn
on Bluetooth by toggling the switch to the right. Bluetooth is on if the switch is green.
2. On your watch:
a. Turn on your watch – Press and hold the bottom button for 2 seconds.
3. On your iOS Mobile Device:
a. Open the Martian mVoice app, follow the step-by-step guide to pair your Martian Watch.
b. At the pairing mode stage – Press and hold the top button until “Pair Ready” appears on the
display of your watch. “Pair Ready” must appear on the Watch until both Watch and mobile device
are paired. If the mode times out, repeat this step.
c. Accept “Bluetooth Pairing Request” – A pop-up window will appear on your mobile device,
telling you that Martian Watch would like to pair with your mobile device; Tap “Pair” to complete the
pairing process. If the codes do not match, tap “Cancel” and try again. If the pairing process is
successful, the watch will vibrate and read “Paired to [device name])”.
d. Accept “Martian Smart Request” – Starting with Version 1.46 of the Martian Alerts App and
Firmware Version 2.17 (see updating your watch Firmware below) an additional Bluetooth
connection is required in order to provide both Notifications and Voice to your watch. This
connection is called “Martian Smart” and a final pop-up menu comes up after hitting “Continue” on
your Martian mVoice app. Tap “Pair”. If successful, the watch will vibrate and read “Paired to