MARTINDALE G User manual
1375 Hird Ave., Cleveland, OH 44107 • Phone (216) 521-8567 • Fax Local 521-9476 / USA & Canada (800) 344-9191
MODEL G BLOWER
INSTRUCTIONS
OPERATION:
To use as blower, attach the tapered nozzle to the discharge opening of the blow-
er, and the protective screen lock to the air intake opening.
To use as a suction cleaner, attach the dust bag to the air discharge opening.
Remove the protective screen lock from the air intake opening and attach the
swivel end of the hose by turning the swivel untill it is secure. Attach the desired
nozzle to the other end of the hose.
MAINTENANCE:
The carbon brushes should be checked periodically and replaced when worn
down to approximately 3/8” long. To check the brushes, unscrew the screws hold-
ing the brush cap guard. Unscrew the brush cap and remove the brushes. Be
sure to note position of the brushes when they are being removed so that if they
are still of sufficient length they can be reassembled in the same position.
The bearings are prelubricated and sealed and do not require further lubrication.
1375 Hird Ave., Cleveland, OH 44107 • Phone (216) 521-8567 • Fax Local 521-9476 / USA & Canada (800) 344-9191
MODEL G GENERAL-DUTY BLOWER
PARTS LIST
PART NO. DESCRIPTION
2663 Bearing, Ball
2681 Washer, Split; for Bearing Cover
2700 Washer, Felt; for Cover
2842 Cap, Brush
2909 Holder, Carbon Brush
2910 Armature, 115V.; Less Bearing
2911 Armature, 115V.; With Bearing
2912 Coil, Field, 115V.; Complete
2915 Brush, Carbon; with Spring
2917 Plate, Cover, Aluminum
2929 P Housing, Motor; with Brush Holder & Set Screw
3342 Guard, Cap, Brush
3346 Switchbox, Aluminum; only
3350 A Switchbox Assembly
3379 Switch
3404 Grommet, Rubber, 3/8” Hole
3415 Cable, Conductor, #18/3, 20”; with Plug
3870 Fan, Impeller, Aluminum
3920-1 Gasket, Rubber; for Screenlock & Nozzle
4720 Chamber, Fan
4762 Screenlock
4960-2 Handle, Aluminum
5766 Screw, 10/24 x 2-1/2”; to hold coil in housing
5764 W Screw, 10/24 x 7/16”; for handle
5807 Screw, 8/32 x 3/8”; to hold housing on base
6800 Nozzle, Blower, Plastic
9417 Bushing
Table of contents
Other MARTINDALE Blower manuals
