
Assembly continued: Steps 4–5
4. Place the Tub Racks (F) into the Tub Basin (C).
5. To raise the Tub Racks (F) to a higher level,
rest one or both Tub Racks on the Tub Rack Ledge (O)
in the center of the Tub Basin (C).
Finished Assembly
Assembly continued: Steps 6–8
6. Adjust the leveling feet on the tub stand to have the
drain approximately ⁄" lower than the opposite side
of the Tub. This allows water to drain better.
7. Adjust the Retractable Ramp (E) to desired position.
8. Slide Door (D) up and down to open and close.
This Master Equipment™ Superior Stainless Steel Tub is warranted against rust defective material or workmanship for one year from the date of purchase.
Any Master Equipment™ product that is determined to be defective in material or workmanship during the warranty period will be replaced without cost to
the purchaser for parts or labor. Please contact PetEdge Customer Service at 1-800-638-5754 regarding any defective product. PetEdge will not be liable
under this warranty for any defect, failure, or malfunction of this product caused by normal wear, abuse, misuse, or unauthorized adjustments or repairs.
PetEdge will not be liable for any incidental or consequential damages of any type. Any implied warranty is limited to the one-year period provided in this
express warranty. Some states do not allow limitations on how long an implied warranty lasts, or exclusion or limitation of incidental or consequential
damages, so the above limitations or exclusions may not apply to you. Warranty is void if product has been modied in any manner, repaired by anyone
other than PetEdge, or has been subject to unreasonable use. Warranty is valid in the United States.
Date Purchased: __________________________
F
C
O
E
D
Rinse thoroughly after bathing pet. Make sure tub is clean and dry after use. Clean with mild soap or a stainless steel-approved cleaner only. Do not use
harsh or abrasive cleaners, bleach, or tools with metal or textured parts, as these can scratch or damage the tub.
Manufactured for / Fabricado para / Fabriqué pour
© Boss Pet Products, Inc. Beverly, MA 01915
Manufactured in / Fabricado en China / Fabriqué en Chine