Mastervolt Digital Input User manual

Installation manual Digital Input English
Mastervolt International B.V, P.O.Box 22947, NL-1100 DK Amsterdam, The Netherlands. Tel.: [phone] Email: [email protected] Copyright © Mastervolt v1.1 090202EN
MasterBus
Terminator
Contact your supplier if one of the items is missing. Do not use the Digital Input if it is damaged.
3 Check the contents of the delivery.
Cable
terminal
Digital Input
MasterBus
cable
Installation
manual
1 This Quick installation guide provides a brief overview of a Digital Input basic installation.
Reading the user’s manual is still necessary for safety instructions, additional features, best performance and
years of trouble-free service. The Digital Input manual is available at www.Mastervolt.com.
2
4 Connect the wires
A. Connect maximum 4 simple electrical switches
to the wires.
B. Click the cable terminal into place.
C. Mount the casing to the wall or to a DIN rail.
D. Insert the MasterBus cables into the connectors
like shown.
1234
Read the safety instructions (chapter 2 of the user’s manual).
Safety regulations and measures
1. Install the switch according to the instructions in both the user’s and installation manual.
2. Never use switches at a location where there is danger of gas or dust explosions.
3. Connections and safety features must be executed according to locally applicable regulations.
Mastervolt does not hold itself liable for:
• Damage resulting from the use of the switches;
• Possible errors in the included manual and the consequences of these;
• Use that is inconsistent with the purpose of the product.

Installation manual Digital Input English
Mastervolt International B.V, P.O.Box 22947, NL-1100 DK Amsterdam, The Netherlands. Tel.: [phone] Email: [email protected] Copyright © Mastervolt v1.1 090202EN
Variable Decription Default Range
Configuration at the Digital Input
Language Language setting of the Digital Input. English 10 languages.
Device name Name of your Digital Input in the MasterBus system. If
you have more than one Digtial Input you should
change names.
DSI
Digital in
DSI + any
maximum 12
character name.
Events locked Option to disable event configuration on the device.
Operable by installer only (log in required).
Unchecked Unchecked,
Checked
Switch X Name of switch X. X ranges (1-4). Naming the switches
after their application is convenient, for instance
“Anchor light” for the anchor light switch.
Switch X Any maximum 16
character name.
5 Configure the Digital Input for MasterBus communication
(see user’s manual for event configuration):
4,5 [0.18]
69 [2.7]4.0 [0.16]
33 [1.3]
33 [1.3]
6.0 [0.24]
78 [3.1]
32 [1.3]
4.0 [0.16]
Specifications Digital Input
Article number 77030900
Number of configurable events 63
Power consumption in sleep modus 0.21 mA
Protection degree IP 21
Weight 125 g including cable terminal
Dimensions of the Digital Input in mm [inch]