Deliverycontentspleasesee(picture1)
lCollection containerwithmotorcasingand5m(16ft)cable.
l2.5m(8ft).dischargehosewithintegratedblocking flap.
l5m(16 ft).suction hose,hoseand piece,5extensiontubes.
l3adjustablefloornozzles(forparticlesize 2, 5,10 mm).(forparticlesize
1/10 ,.1/5 ,3/8 )
lSludgecollectionbag.
lOperation instructions.
lThevacuumfeet(Pleasesee picture9,10).
Safetyinstructions Powerconnection
lOnlyoperatethedevicewhennopeopleareinthewater!
lBeforereaching intothewateralwaysunplug all deviceslocatedinthewater.
lOnlyoperatethedevicefromanoutletthathasbeen installedinaccordancewith
directions.
lComparesupplyvoltage(V)and supplyfrequency(Hz)of yourpowersourcewiththe
dataonthe nameplate.Thesedatamust agree.
lEnsurethatthe deviceisprotectedviaaresidualcurrentprotective circuit witharated
residual currentof maximum30Ma.Pleaseconsult anelectrician!
lForsafetyplug thevacuumintoanelectricaloutletwitha(GFCI)Ground FaultCircuit
Interrupter.
lElectrical installationsforgardenponds mustsatisfytheinternationaland national
building determinations.
lDonotcarryorpull thedevicebythe connecting cable!
lKeepthepowerplug and allconnectionpointsdry!
lThedevicemay notbeoperatedif cableorcasing isdefective!Pleaseconsultyour
dealeroraspecializedworkshop.
Assembly
1. Loosenthe containerclampsand remove motorcasing.Takeallpartsoutof the
collectioncontainer.
2. Replacethemotorcasing and locktheclamps.
3. Insertthesuctionhoseend intotheupper opening ofthecollectioncontainerand lock
byturninglightlytotheright. (Pleaseseepicture2)
4. Attachtheextensiontubes(numberasrequired)and fitasuitablesuction nozzle.
(Pleasesee picture5,6)
5. Inserttheopenend ofthedischargehose(theend ofthehosewithoutonewayflapper
Pleaseseepicture3)intothelower dischargeopening ofthe collectioncontainer.
(Pleasesee picture4)Thehoseend withonewayflappershouldbeaway fromthe
vacuumatfarthestpoint. (Pleasesee picture7)
Setup
1. Setup thevacuumnearthepond.Theminimumclearancetotheedgeof thepond is2
m(6.5ft)forsafetyreasons.Thedeviceshouldbesetup asclosetowaterlevelas
possible.Makesurethe deviceisstandingfirmly.
2. Lay thedischargehoseinsuchamannerthatthesludgewaterisconductedinto
shrubberyorgrassyarea during draining.Lay the dischargehoseflaton theground (if
possiblewithaslightinclinedownward).
3. Fastenthesludgecollectionbagontheendof thedischargehoseasneeded(for
examplewhensuctioninghairalgae)(Pleasesee picture8),sothatthecleanedwater,
if necessary,canbereturnedtothepond.
4. Connectthedevicetothemainspower.