MATE iSense User manual

V4.5
iSense
User Guide
Version 4.5

V4.5
Page ii

2013 MATE Intelligent Video Ltd All rights reserved.
The copyright and proprietary rights in the guide belong to MATE Intelligent Video Ltd. It is strictly forbidden to copy,
duplicate, sell, lend or otherwise use this guide in any way, shape or form without the prior consent of MATE Intelligent
Video Ltd.
This product is based on software developed by MATE Intelligent Video Ltd.
Redistribution of this manual and its use in binary form (PDF) are permitted, provided that the above copyright notice and
this paragraph are duplicated in all such forms and that any documentation, advertising materials and other materials related
to such distribution and use, acknowledge that the software was developed by MATE Intelligent Video Ltd.
R IMPLIED WARRANTIES,
INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE.

trademarks of MATE Intelligent Video Ltd.
All other trademarks used in this document are the property of their respective owners

Table of Contents
V4.5
Page iii
TABLE OF CONTENTS
1. Introduction...............................................................................................................1-1
1.1. About this Guide..............................................................................................1-1
2. Overview...................................................................................................................2-1
2.1. The Technology...............................................................................................2-1
2.2. Architecture......................................................................................................2-1
2.3. Logical Architecture ........................................................................................2-1
2.3.1. iSense......................................................................................................2-1
2.3.2. Count Watch DB Writer.........................................................................2-1
2.3.3. Count Watch Database...........................................................................2-2
2.3.4. Count Watch Reports .............................................................................2-2
2.3.5. Cortex Viewer ........................................................................................2-2
2.3.6. Rules Manager/Device Explorer ............................................................2-2
3. System Setup.............................................................................................................3-1
3.1. In the Package..................................................................................................3-1
3.2. Operating System Requirements (Cortex).......................................................3-1
3.3. Camera Installation..........................................................................................3-2
3.4. Installing the Hardware....................................................................................3-2
3.5. LED Display ....................................................................................................3-3
3.6. Installing the Cortex Software.........................................................................3-4
3.6.1. Installing .NET Framework....................................................................3-4
3.6.2. Cortex Installation..................................................................................3-4
3.7. Un-Installing the Software...............................................................................3-5
4. Getting Started...........................................................................................................4-1
4.1. Initial Use of the Application...........................................................................4-1
4.2. StartUp Application.........................................................................................4-2
4.2.1. Interface Language.................................................................................4-3
5. Rules Manager/Device Explorer...............................................................................5-1
5.1. Launching Rules Manager/Device Explorer....................................................5-1
5.1.1. Menu Bar................................................................................................5-3
5.2. Device Explorer View......................................................................................5-4

Table of Contents
V4.5
Page iv
5.2.1. General Settings Tab.............................................................................. 5-4
5.2.2. Video Settings Tab................................................................................. 5-7
5.2.3. I/O Settings Tab................................................................................... 5-11
5.2.4. External Interfaces Tab........................................................................ 5-13
5.2.5. IP Video Source Settings ..................................................................... 5-15
5.2.6. Date Time Settings Tab .......................................................................5-16
5.2.7. Additional Settings Tab ....................................................................... 5-16
5.3. Rules Manager View..................................................................................... 5-17
5.3.1. Tree View............................................................................................. 5-18
5.3.2. Alarm Geometry Pane.......................................................................... 5-18
5.3.3. Alarm Tab............................................................................................ 5-19
5.3.4. MSF Schedule Tab............................................................................... 5-20
5.4. Working with MSFs...................................................................................... 5-21
5.4.1. Creating an MSF.................................................................................. 5-21
5.4.2. Saving an MSF (BW only) .................................................................. 5-21
5.4.3. Activating/Deactivating a Single MSF................................................ 5-22
5.4.4. Activating/Deactivating Multiple MSFs.............................................. 5-22
5.4.5. Deleting an MSF.................................................................................. 5-22
5.4.6. Renaming an MSF ............................................................................... 5-22
5.4.7. Copy/Paste an MSF.............................................................................. 5-22
5.4.8. Exporting an MSF................................................................................ 5-23
5.4.9. Importing an MSF................................................................................ 5-23
5.5. Working with Alarm Geometries.................................................................. 5-23
5.5.1. ROI Tab for Detection Zone Geometry............................................... 5-24
5.5.2. Object Sizes Tab.................................................................................. 5-24
5.5.3. Classification Tab ................................................................................ 5-24
5.5.4. Working without Perspective............................................................... 5-25
5.5.5. Working with Perspective.................................................................... 5-26
5.5.6. Ignore Zone Tab................................................................................... 5-28
5.6. Setting Alarms............................................................................................... 5-29
5.6.1. Optional Settings.................................................................................. 5-29
5.6.2. Display and Editing Options................................................................ 5-29
5.7. Alarm Types.................................................................................................. 5-30
5.7.1. People Counting................................................................................... 5-30
5.7.2. Car Counting........................................................................................ 5-31

Table of Contents
V4.5
Page v
6. CountWatch DB Writer...........................................................................................6-33
6.1. Main Interface..................................................................................................6-2
6.2. Add VDUs .......................................................................................................6-3
7. DB Maintenance........................................................................................................7-1
7.1. Accessing DB Maintenance.............................................................................7-1
7.2. Action Type and Action Range........................................................................7-2
7.3. Deleting a Camera............................................................................................7-2
7.4. Deleting a Device.............................................................................................7-3
7.5. Renaming a Camera.........................................................................................7-3
7.6. Tools ................................................................................................................7-3
8. Relays........................................................................................................................8-1
8.1. Relays Setup.....................................................................................................8-1
9. Appendix...................................................................................................................9-1
9.1. Hardware Specifications..................................................................................9-1
9.2. List of WAN Port Numbers and Applications.................................................9-2
10. Index........................................................................................................................10-1

Table of Contents
V4.5
Page vi
LIST OF FIGURES
Figure 1: Trigger NG (iSense) Front Panel, Showing Inputs.............................................3-2
Figure 2: Trigger NG (iSense) Back Panel ........................................................................ 3-3
Figure 3: Analog Video Capture Card Question................................................................ 3-4
Figure 4: Application Settings............................................................................................ 4-1
Figure 5: StartUp Application............................................................................................ 4-2
Figure 6: Rules Manager Login ......................................................................................... 5-1
Figure 7: Rules Manager View .......................................................................................... 5-2
Figure 8: Device Explorer View ........................................................................................ 5-2
Figure 9: Rules Manager/Device Explorer......................................................................... 5-4
Figure 10: General Settings Tab......................................................................................... 5-4
Figure 11: Video Settings Tab ........................................................................................... 5-7
Figure 12: Interlaced Image Before Filter........................................................................ 5-10
Figure 13: De-interlaced Image........................................................................................ 5-10
Figure 14: I/O Settings Tab - Trigger............................................................................... 5-11
Figure 15: I/O Settings Tab - iSense................................................................................ 5-11
Figure 16: External Interfaces tab - Trigger..................................................................... 5-13
Figure 17: External Interfaces tab - iSense ...................................................................... 5-13
Figure 18: IP Video Source Settings Tab......................................................................... 5-15
Figure 19: Date Time settings tab .................................................................................... 5-16
Figure 20: Additional Settings tab ................................................................................... 5-16
Figure 21: Rules Manager................................................................................................ 5-17
Figure 22: Alarm Geometry Pane .................................................................................... 5-18
Figure 23: Alarm Tab....................................................................................................... 5-19
Figure 24: MSF Schedule Tab ......................................................................................... 5-20
Figure 25: Alarm Geometries Tabs and the ROI toolbar................................................. 5-23
Figure 26: Minimum and Maximum indicators............................................................... 5-26
Figure 27: Perspective...................................................................................................... 5-27
Figure 28: Object Sizes .................................................................................................... 5-27
Figure 29: Ignore Zone Tool............................................................................................ 5-29
Figure 30: People Counting.............................................................................................. 5-31
Figure 31: Car Counting Top and Side ............................................................................ 5-33

Table of Contents
V4.5
Page vii
Figure 32: CountWatch DB Writer.....................................................................................6-2
Figure 33: Add VDU ..........................................................................................................6-3
Figure 34: DB Maintenance Utility ....................................................................................7-2

Introduction
V4.5
Page 1-1
1. INTRODUCTION
IN THIS SECTION
About this Guide...............................................1-1

transmission server for real-time detection and counting of people or cars in video
images. iSense uses a DSP processor to analyze an external video camera, with
video encoding and transmission over a network.
iSense is packaged with all software programs required to operate as a complete
-
of several VDUs (Video Detection Units) in a network saving all data to a
common database.
Access to the counting data is done via one or more web-based tools run from
standard browsers.
1.1. ABOUT THIS GUIDE
This guide is divided into the following sections:
1. Overview: A general overview of iSense.
2. System Setup: Procedure for setting up the hardware and software.
3. Getting Started: Running the software.
4. Rules Manager/Device Explorer: Application for the configuration of
iSense.
5. CountWatch DB Writer: Application for connecting all devices to a single
database.
6. DB Maintenance: An overview of the database maintenance utility.
7. Relays: How to connect the relays and configure them.
8. Hardware Switch: How to connect a hardware switch and configure it.
9. Counting Setup: How to set up the counting analytics.
10. Appendix: Hardware Specifications of the iSense.

Overview
V4.5
Page 2-1
2. OVERVIEW
IN THIS SECTION
The Technology ...............................................2-1
Architecture......................................................2-1
Logical Architecture..........................................2-1
iSense is based on a proprietary and robust video counting technology for real-
time detection and counting of people or cars in video images. iSense converts
video data into real-time counting information, storing it in a central database.
The description in this user guide focuses on a single iSense Video Detection Unit
(VDU) and the bundled software.
2.1. THE TECHNOLOGY
Video counting is a domain of Video Content Analysis (VCA) that applies object
detection and tracking technologies to count people or cars, entering or exiting a
region of interest. The field of VCA is also known as Computer Vision.
2.2. ARCHITECTURE
iSense is comprised of different modules, each fulfilling a specific task. The
system is scalable from a single machine up to a large network analyzing a large
number of video cameras. The architecture remains the same, although the
component parts may end up residing on different computers.
2.3. LOGICAL ARCHITECTURE
The logical architecture can be broken down as follows:
2.3.1. iSense
iSense analyzes video frames in order to detect, track and count cars or people by
their motion in to, or out of, the designated regions.
2.3.2. Count Watch DB Writer
The Count Watch DB Writer receives the counting data from VDUs and stores the
data in the Count Watch Database.

Overview
V4.5
Page 2-2
2.3.3. Count Watch Database
The Count Watch Database is based on Microsoft SQL technology and stores all
the counting information received.
2.3.4. Count Watch Reports
Count Watch Reports is a web based application for retrieving the counting data
from the Count Watch Database using Internet Explorer.
2.3.5. Cortex Viewer
Cortex Viewer serves as the main user interface for viewing status of the device
and each of its connected cameras and for displaying live video images with video
tracking overlay.
*The installation includes one Cortex Viewer installed on the same machine for
local operation. The Cortex Viewer is pre-configured to operate with the local
Cortex Server installed on the same machine (local IP Address 127.0.0.1).
2.3.6. Rules Manager/Device Explorer
The Rules Manager program defines and manages rule-sets that specify the type,
shape, location and other key-parameters of detectable events. Once defined, the
rules are uploaded to reside on the device and configure the operation of the
Video Analytics Engine.
Device Explorer is used to set up the network configuration and advanced settings
of the VDU.

System Setup
V4.5
Page 3-1
3. SYSTEM SETUP
IN THIS SECTION
In the Package............................................................3-1
Hardware and Operating System Requirements .......3-1
Camera Installation.....................................................3-2
Installing the iSense ...................................................3-2
Installing the Cortex Software ....................................3-4
Un-Installing the Software ..........................................3-5
The iSense device comes pre-installed with its own embedded software. The
Installation CD with the Cortex software is provided for controlling and managing
the iSense. If more than one iSense is incorporated in a multi-device
configuration, control and management of all the devices is done from a single
centralized location.
3.1. IN THE PACKAGE
The iSense product package includes:
iSense device with power supply (auto-select 110V/220V - to 12V).
Installation CD with the Cortex software.
Three 8-pin connectors.
Dome Camera (optional purchase).
3.2. OPERATING SYSTEM REQUIREMENTS (CORTEX)
Software:
Microsoft Windows Server 2003 Standard Edition SP2 (32-bit)
NET Framework 2.0 or higher (provided on the installation CD)
Internet Information Services (IIS Windows Component)
Information:
To add the IIS Windows component: Start Settings Control Panel 
Add or Remove Programs Add/Remove Windows Components (may
require the Microsoft Windows XP setup disk if not already installed).

System Setup
V4.5
Page 3-2
Note:
Regional and Language option should be set to English (United States).
3.3. CAMERA INSTALLATION
Correct camera positioning and installation is the key to obtaining good system
performance as follows:
1. For accurate counting, minimum camera height (the distance from the bottom
of the lens to the floor) should be 3 m or 10 ft, and the camera should point
vertically downwards (see diagram below).
2. Accuracy can be reduced by reflections from the floor and by hard shadows.
Position camera and optional lighting sources to minimize these factors.
3. Make sure the people to be counted are fully visible in the image, even when
traveling near the edges of the zone. Increase the height of the camera if
required.
3.4. INSTALLING THE HARDWARE
FIGURE 1: TRIGGER NG (ISENSE)FRONT PANEL,SHOWING INPUTS

System Setup
V4.5
Page 3-3
Input
Relays Counter Relays
FIGURE 2: TRIGGER NG (ISENSE)BACK PANEL
1. Physically connect the iSense IM to the network using a network cable. The
Ethernet port is located on the front panel of the iSense NG (see Fig. 2).
2. Physically connect up to four video cameras to the Video In Socket 1 located
on the front panel of the iSense. Use BNC connectors.
3. Connect the power supply to the socket located on the back panel of the
iSense (see Fig. 3). Make sure the Power Supply itself is located close to the
iSense.
Note:
See the Appendix (on page 9-1) for the technical specifications of all
connections.
3.5. LED DISPLAY
Once the power is connected, the LED Panel displays the following information:
Trigger NG LED Display
LED
Description
1
Video Input 1 Active
2
N/A
3
N/A
4
Connection to Cortex

System Setup
V4.5
Page 3-4
3.6. INSTALLING THE CORTEX SOFTWARE
Install the Cortex software to control and manage iSense.
3.6.1. Installing .NET Framework
The .NET Framework is a component of the Microsoft Windows® operating
system used to build and run Windows-based applications. The software requires
.NET Framework 2.0 to run properly. Part of the installation of the bundled
software checks if .NET Framework 2.0 already exists on the computer and offers
to install the software if it cannot find it. The software will not work without the
.NET Framework.
3.6.2. Cortex Installation
1. Insert the Cortex Installation CD and run the Setup application located in the
root directory on the CD.
2. Read the Software License Agreement and select Yes to continue.
3. Choose a setup type from the available options:
Complete to install the basic support for files and Direct Show (Analog video
capture device) as well as support for Intellex, Axis and Sony.
Custom to selectively decide which support to add in addition to the basic
support for files and Direct Show.
Click Next to continue.
4. At the Event Media Setup Wizard Click Next to continue.
5. Either accept the default location for the installation of the program files, or
browse to another location, and then click Next to continue.
6. Wait until all the files and device drivers are installed (follow on screen
instructions). Click Yes At the pop up window question if you are going to
use analog video, or No in order to ignore and continue.
FIGURE 3: ANALOG VIDEO CAPTURE CARD QUESTION
7. Wait until all the files and applications are installed, clicking Next when
prompted with each sub-installation. Click Finish to restart your computer,
and once Windows reloads, complete the Ajax sub-installation by clicking
Next when prompted.
Shortcuts to VCA and VCA Utilities are placed on the desktop.

System Setup
V4.5
Page 3-5
Important:
Restarting the computer is vital to the installation process. Running the
application before restarting your computer may result in some components of the
application not functioning as intended.
3.7. UN-INSTALLING THE SOFTWARE
To uninstall the Cortex software:
1. Click Start Settings Control Panel Add or Remove Programs 
find Cortex in the list and select it click the Change/Remove button.
2. In the Installation Wizard that opens, choose Remove to uninstall all the
software.

Getting Started
V4.5
Page 4-1
4. GETTING STARTED
IN THIS SECTION
Initial Use of the Application.............................4-1
StartUpApplication ...........................................4-2
Double click on the Cortex shortcut placed on the desktop during installation.
StartUp Application launches and minimizes to the system tray.
Note:
Verify that the Windows 2003 Firewall software is NOT operational: iSense does
not support the operation of any firewall software.
4.1. INITIAL USE OF THE APPLICATION
When running the application for the first time after installation, an Application
Settings window is opened. Click the applications that you are licensed to use. If
you are running Cortex Watch select Cortex.
FIGURE 4: APPLICATION SETTINGS
After the installation completes (after restarting the computer), double-click on the
VCA shortcut placed on the desktop during installation. StartUp Application
launches and minimizes to the system tray. StartUp Application also
automatically opens the Cortex Server and Cortex Viewer programs.
In addition, certain information is requested by pop up boxes in order to correctly
configure the application:

Getting Started
V4.5
Page 4-2
Device ID: Every device in the Cortex network needs a unique identifier. Enter a
number that will be unique to the installed computer and click OK (make up a
number): any integer between 1 and 9999 can be entered in this field, as long as
each device and computer in the same Cortex network has a different number.
WAN IP Address: In the case of the Cortex Viewer and VDU not residing within
the same LAN (Cortex Viewer can be installed on multiple computers using the
Cortex Viewer Installation CD), the VDU needs to know the preconfigured WAN
IP Address of the Cortex Viewer, as the VDU sends video directly to the Cortex
Viewer, bypassing the Cortex Server application. Enter the IP Address and click
OK. If running no other instance of Cortex Viewer outside the same LAN, click
Cancel.
4.2. STARTUP APPLICATION
StartUp Application is an all-in-one application that performs the following
actions:
Launches all critical software programs running on the Cortex computer platform
(such as Cortex Server and Cortex Viewer).
Configures the Interface language.
Monitors all critical programs status.
Access StartUp Application by clicking the system tray icon: .
FIGURE 5: STARTUP APPLICATION
The following is a description of the StartUp Application dialog screen:
Product The product's name.