Fault Phenomenon Solutions
connect the HDMI signal line,
there is no display
How to set up split screen
in Windows 10
Screen flickering, sometimes
normal, sometimes abnormal
The mobile phone is a
TYPE-C interface, and there is
no display after connection
TYPE-C signal line_line
connection, no display
Non-full-featured
(without video input) mobile
phone connected with the
same screen cable, no display
The monitor is with a touch
screen, which cannot
be controlled by touch
1. Need to connect to the power supply
2. Check whether the signal source is set to "HDMI"
or automatic in the settings menu
3. Replug or replace the signal cable
Start--Settings--Display Settings--Multiple Displays,
and then set different options in this interface
1. Caused by insufficient power supply, check
whether the supply voltage and current are not
enough; 2. If the interface is not in good contact,
re-plug the patch cord
1. Confirm that the TYPE-C interface of the device
has a video output function
2. Confirm that it is connected to the TYPE-C^
source interface of the monitor
3. In the settings menu, check whether the signal
source is set to "TYPE-C" or automatic
4. Connect the monitor to the power supply
5. Replug or replace the signal cable
1. Confirm that the TYPE-C interface of the device
has video output function
2. For TYPE-C mobile phones without video output
function, you need to purchase a matching
same-screen cable separately
3. Replug or replace the signal cable
1. Connect the monitor to the power supply
2 Connect the USB port of the same screen cable to
the charger to supply power to the mobile phone
3. Re-plug the patch cord
4. Turn on the USB debugging mode of the mobile
phone, and download the applet after receiving the
prompt
1. When connecting the computer with the monitor
HDMI, you need to connect the USB TO TYPE-C
cable
2. When the TYPE-C signal is connected, confirm
that the TYPE-C interface of the device is fully
functional
3. Replug or replace the cable
