Matheo MHB 60 User manual
1
MHB 60
2
3
1
2
3
4
5
6
4
1
2
3
4
5
6
7
5
1
2
3
4
5
6
6
7
8
9
10
11
1
Important safeguards
English
Dear customer!
Thanks for your worthful choice and condence to Matheo brand.
We really hope that you enjoy operating this product.
MHB 60
Technical data
Power: 600W
Voltage/Frequency: 220-240V/50-60Hz
When using this electrical appliance, below safety precautions should
always be followed:
1. Read this user manual carefully before use and save it for future
reference.
2. Dangerous high voltages are present inside this enclosure. To avoid
electric shock, DO NOT open the cabinet. Refer servicing to qualied
personnel only.
3. Before using this unit, check the mains power voltage corresponds to
the voltage shown on the marking plate. Only connect to a suitable AC
240V~50Hz mains socket.
4. To protect against electrical shock, do not put the motor body, cord or
electrical plug of this hand blender set in water or other liquid. Unplug
the unit rst if the appliance falls into liquid, do not reach into the liquid
without unplugging the unit rst.
5. This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instructions concerning use of the appliances by a person
responsible for their safety.
6. Children should be supervised to ensure that they do not play with the
appliance. This appliance should not be used by children without
supervision. To avoid possible accidental injury, close supervision is
2
necessary when the appliance is being used by or near children or
inrm persons.
7. Always unplug the blender from the supply if it is unattended and
before assembling, disassembling or cleaning. Never leave this unit
unattended when it is plugged in. Keep this unit out of the reach of the
children. To unplug, grasp the plug and pull from electrical outlet. Never
pull cord.
8. Avoid contacting moving parts.
9. This appliance is not intended to be operated by means of an external
timer or separate remote-control system.
10. During operation, keep hands, hair, clothing, as well as spatulas and
other utensils away from attachments and mixing container, to reduce
risk of injury to persons, and/or damage to the appliance. A spatula may be
used, but must be used only when the unit is not operating.
11. Do not operate the appliance with a damaged cord or plug or after the
appliance malfunctions, or is dropped or damaged in any manner. For
electrical safety, any repairs or adjustments to the appliance must be
carried out by a qualied electrical person only.
12. If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualied persons in order to avoid a hazard.
13. Do not touch the blades, especially when the appliance is plugged in.
Blades are SHARP. Handle carefully when removing, inserting or cleaning.
14. If the blades get stuck, unplug the appliance before you remove the
ingredients that block the blades.
15. Be careful if hot liquid is poured into the food processor or blender as it
can be ejected out of the appliance due to a sudden steaming. When
mixing liquids, especially hot liquids, use a tall container or make small
quantities at a time to reduce spillage, splattering and possibility of
injury from burning. Be careful not to come into contact with hot liquids.
16. The use of attachments or accessories not recommended by
manufacturer may cause re, electrical shock, or risk of injury.
3
Before using
17. This appliance is not intended for commercial, industrial or outdoor use.
This appliance is intended to be used in household and similar applications
such as:
sta kitchen areas in shops, oces and other working environments;
–farm houses;
–by clients in hotels, motels and other residential type environments;
–bed and breakfast type environments.
18. Do not let any cord hang over the edge of the table or counter. Do not
let cord contact hot surfaces, including stovetop.
19. Make sure the appliance is switched o, the motor has stopped
completely, and the appliance is unplugged from outlet before changing
accessories, approaching parts that move in use, and before cleaning.
20. Be certain the appliance is securely assembled in place before
operating the appliance.
21. To reduce the risk of injury, always use the Hand Blender Set in a bowl
or supplied mixing beaker.
22. WARNING! Beware of potential injury from misuse. Care should be
taken when handling sharp blades, emptying the chopper bowl
and during cleaning.
1. Ensure the above safety precautions are understood and adhered to.
2. Carefully unpack the appliance and remove all packaging materials.
Make sure all the accessories are included. If any item is damaged or missing,
please contact your dealer.
3. Read all instructions completely for detailed operating procedures. Get
to know your hand blender set and all of its parts.
4. Wipe o the motor unit and power cord with a clean, slightly damp cloth
to remove any dirt or dust. Dry it thoroughly with a soft absorbent cloth.
5. Wash the blender bar, beaker, chopper coupling unit, chopper blade,
chopper bowl, whisk coupling unit and whisk in warm water, rinse and dry
thoroughly before use. Please take extra care when washing sharp blades.
4
The Hand blender Set can be assembled and used as Hand blender,
Chopper and Whisk.
Hand blender
A. Speed Selector
B. Normal Speed button
C. Turbo Speed button
D. Motor unit
E. Blender bar
F. Beaker
ASSEMBLY
1. Ensure that the hand blender is unplugged from mains power outlet
before assembling or removing attachments.
Handle with care.
2. Insert the motor unit into the top part of theblender bar, ensure that
the “ ” triangle mark on the motor unit aligns with the“ ” unlock mark on
the upper side of the blender bar (refer to right Fig.1). Twist the motor unit
clockwise slightly until it securely locks into place (“ ”mark on the motor
To avoid the possibility of overheating and damage to the product, please
avoid operating this appliance for excessive periods of time.
Caution:
1. Do not operate this unit for a continuous period of more than 1 minute,
thereafter, switch it o for at least 1 minutes to allow it to cool down to
prevent overheating or damaging before repeat usage.
2. When assembling, dismantling or cleaning, always ensure that the
appliance is not connected to the mains power supply.
WARNING: Always disconnect the appliance from power supply if it is left
unattended and before assembling, disassembling or cleaning.
Know your hand blender set
Operaton care
6. Do not use harsh detergents or abrasives materials to clean any of the
parts/housing.
7. Blades are very SHARP. Handle carefully. Keep the blades and the appliance
out of reach of children.
WARNING: DO NOT IMMERSE THE MOTOR UNIT, PLUG AND CORD IN WATER
OR ANY OTHER LIQUID.
A
B
C
D
E
F
5
unit aligns with the “ ” lock mark on blender bar).
3. To disassemble, just turn in the reverse direction.
WARNING: BEWARE OF POTENTIAL INJURY FROM MISUSE. CARE SHOULD
BE TAKEN WHEN HANDLING SHARP BLENDING BLADES,ASSEMBLING THE
BLADES AND DURING CLEANING.
Chopper
A. Speed Selector
B. Normal Speed button
C. Turbo Speed button
D. Motor unit
E. Chopper coupling unit
F. Chopper blade
G. Chopper bowl
ASSEMBLY
1. Ensure that the hand blender is unplugged from mains power outlet
before assembling or removing attachments. Handle with care.
2. Grip the hub of the Chopping blade (plastic part) and slide it onto the
shaft in the center of chopper bowl. If necessary, rotate it slightly until it
slides into place.
3. Put the chopper coupling unit onto the chopper bowl, ensuring that
locking tabs on the inside of chopper bowl align with the locking grooves
on the bottom of chopper coupling unit. Rotate the chopper coupling unit
until it locked into place.
4. Insert the motor unit into the top part of the chopper coupling unit,
ensure that the “ ”triangle mark on the motor unit align with the “ ”
unlock mark on the upper side of the chopper coupling unit. Twist the
motor unit clockwise slightly until it securely locks into place (“ ”mark on
the motor unit aligns with the“ ” lock mark on chopper coupling unit).
5. To disassemble, just turn in the reverse direction.
WARNING: BEWARE OF POTENTIAL INJURY FROM MISUSE. CARE SHOULD
BE TAKEN WHEN HANDLING SHARP CHOPPER BLADES, ASSEMBLING THE
BLADES AND DURING CLEANING.
Whisk
A. Speed Selector
B. Normal Speed button
C. Turbo Speed button
D. Motor unit
E. Whisk coupling unit
F. Whisk
A
B
C
D
E
F
G
A
B
C
D
E
F
6
ASSEMBLY
1. Ensure that the hand blender is unplugged from mains power outlet
before assembling or removing attachments. Handle with care.
2. Grip the hub of the Chopping blade (plastic part) and slide it onto the
shaft in the center of chopper bowl. If necessary, rotate it slightly until it
slides into place.
3. Put the chopper coupling unit onto the chopper bowl, ensuring that
locking tabs on the inside of chopper bowl align with the locking grooves
on the bottom of chopper coupling unit. Rotate the chopper coupling unit
until it locked into place.
4. Insert the motor unit into the top part of the chopper coupling unit,
ensure that the “ ” triangle mark on the motor unit align with the “ ”
unlock mark on the upper side of the chopper coupling unit. Twist the
motor unit clockwise slightly until it securely locks into place (“ ” mark on
the motor unit aligns with the“ ” lock mark on chopper coupling unit).
5. To disassemble, just turn in the reverse direction.
WARNING: BEWARE OF POTENTIAL INJURY FROM MISUSE.
Preapring for use
1. Let hot ingredients cool down before chopping them or pouring
them into the beaker (max. temperature 80oC).
2. Cut most rm or brous solid foods into 1cm to 1.5cm cubes and softer
foods into 1.5cm to 2.5cm before processing.
3. Assemble the appliance properly before plugging it into the wall socket.
4. Warning: Always set the speed selector to “0” and unplug the appliance
from power supply before assembling, changing accessories, adding
ingredients, disassembling, cleaning or after use.
Tips:
•Do not overll the processing bowl.
•Do not chop very hard ingredients like fruit pits, bones, coee beans and
ice cubes. They could cause the blade to become blunt and damage to the
unit. For recipes calling for ice, use crushed ice (not whole cubes) for best
results.
•When making compound butters, remove the butter from the refrigerator
and let it come to room temperature before blending in the ingredients.
•If the blades get stuck, unplug the appliance before you remove the
ingredients that block the blades. A spatula may be used to remove the
food which sticks to the blade or to the processing bowl.
Caution - Avoid contacting moving parts. Keep hands, hair, and clothing,
as well as spatulas and other utensils, away from mixing tools during
operation to reduce risk of injury to persons, and/or damage to the
appliance.
Warning - Injury Hazard:
7
Be careful: The cutting edges of the blade are very sharp!
Avoid touching it directly!
Do not scrape bowl while the appliance is operating. Unplug
the appliance and ensure it is stopped completely before
touching mixing tools. Failure to do so can result in broken
bones, cuts or bruises.
Operation
The Hand blender Set can be used as Hand blender, Chopper and Whisk.
Hand blender
The hand blender is intended for:
•Blending uids e.g. dairy products, sauces, fruit juices, soups, mixed
drinks and shakes.
•Mixing soft ingredients e.g. pancake batter or mayonnaise.
•Pureeing cooked ingredients, e.g. for making baby food.
1. Place the Beaker on a dry, level surface. Do not plug the cord into any
electrical outlet until the appliance is assembled completely and food
has been added.
2. Attach the blender bar onto the motor unit.
3. Place the mixture in a Mixing Beaker. Always use high-sided mixing
beaker and limited amount of ingredients/liquids to a level where it avoids
spillage during blending at high speed.
Warning: Do not add too much ingredients/liquids to avoid overow.
4. To avoid splashing, immerse the blade guard completely in the
ingredients that will be blended.
5. Plug the unit into a suitable 240V AC mains wall socket.
6. Set the Speed Selector to the desired speed setting to switch on the
appliance. There are ve dierent speeds to choose from 1-5. When
chopping food, set at a low speed to avoid blocking. Switch to a higher
speed later.
7. Activate the appliance by depressing and holding the Normal Speed
button to chop the food. Depressing and holding the Turbo Speed
button will momentarily increase the speed. Release the Speed button to
deactivate.
8. Blend the ingredients by moving the blender slowly up and down and
in circles to make the most avourful, full-bodied liquid recipes. Do not
pull the blender out of the mixture while the unit is running.
9. Set the Speed Selector to “0” to switch o the appliance. Unplug the
Hand blender immediately after use.
Chopper
The chopper is intended for chopping ingredients such as nuts, meat,
onions, hard cheese, boiled eggs, garlic, herbs, dry bread etc.
The blades are very sharp! Be very careful when handling the blade unit,
especially when removing it from the chopper bowl, when emptying the
chopper bowl and during cleaning.
1. Place the Chopper bowl on a dry, level surface. Do not plug the cord into
any electrical outlet until the appliance is assembled completely and food
has been added.
2. Put the chopper blade unit in the chopper bowl.
3. Prepare the dry ingredients as directed in “Chopping Guide” section
or cut it into 1.5cm cubes or small uniform pieces. Place the ingredients
evenly into the processing bowl.
4. Put the coupling unit onto the chopper bowl.
5. Fasten the motor unit onto the coupling unit.
6. Plug the unit into a suitable 240V AC mains wall socket.
7. Set the Speed Selector to the desired speed setting to switch on the
appliance. There are ve dierent speeds to choose from 1-5. When
chopping food, set at a low speed to avoid blocking. Switch to a higher
speed later.
8. Activate the appliance by depressing and holding the Normal Speed
button to chop the food. Depressing and holding the Turbo Speed
button will momentarily increase the speed. Release the Speed button to
deactivate.
9. Set the Speed Selector to “0” to switch o the appliance. Unplug the
Chopper from the power supply immediately after use.
10. If the ingredients stick to the wall of the chopper bowl and it needs to
be scraped into the path of the blade by using a spatula, turn the appliance
o and unplug from the mains socket and make sure blade has stopped
rotating completely before disassembling the chopper bowl.
11. To remove food from chopper bowl, carefully pull the chopping blade
out. ALWAYS HANDLE THE CHOPPING BLADE CAREFULLY AS IT IS SHARP.
Use the rubber or plastic spatula to remove food from the blades and the
chopper bowl. Do not use the chopper bowl for storing food.
Whisk
The whisk is intended for whipping cream, whisking egg whites, desserts etc.
1. Place the processing bowl on a dry, level surface. Do not plug the cord
into any electrical outlet until the appliance is assembled completely and
food has been added.
2. Connect the whisk to the coupling unit.
3. Connect the coupling unit to the motor unit.
4. Put the ingredients in the processing bowl. Tip: Use a large bowl for the
best result.
5. Immerse the whisk completely in the ingredients.
6. Plug the unit into a suitable 240V AC mains wall socket.
8
Table of contents
Languages:
