Matrix Cleaning Systems SV4 User manual

STEAM & VACUUM
4.5 BAR
Quick Start Guide
SV4
Get setup and ready to clean
WHAT’S INCLUDED
SV4 User Manual Quick Start
Guide
2.5 Metre Hose
15RM00001
Brush Insert
15RM00005
Squeegee Insert
15RM00006
Carpet Insert
15RM00007
WHAT’YOU NEED
Wear safety shoes gloves, goggles and any
other PPE as specied by local regulations
•
Please read and comply with the
safety instructions found in the
user manual prior to using the
machine. Retain this document for
future reference. These instruc-
tions are also available on our
website:
www.matrixcleaningsystems.co.uk
•
•Areas to clean
Lets get started
GET TO KNOW YOUR MACHINE
Steam hose socket
Cold water
tank
•
LED temperature
display
Heater on LED
Rell cold
water LED
On/O󰀨 switch
•
•
•
* only 5 brushes supplied with machine as standard
www.matrixcleaningsystems.co.uk
MATRIX CLEANING SYSTEMS LTD, Unit H, Leyland Business Park, Centurion Way,
Farington, Leyland, PR25 3GR, UK Tel: [phone] Fax: [phone] Page 1 of 2
2 x Extension
Tubes
15RM00003
Floor Brush
15RM00004
•
•
Vacuum hose
socket
•
Collection
Tank
•Accessory
Basket
•Handle
Steam ready LED
•
•
Mains Power Cable
11RM00061 (UK)
11RM00062 (EU)
QUICK START GUIDE
MATRIX SV4
Upholstery Tool
15RM00013
150mm Brush
15RM00041
150mm Squeegee
15RM00042
Long Steam
Lance
15RM00050
Short Steam
Lance
15RM00051
*10 x Nylon
Brushes
15RM00019
Crevice Tool
15RM00043
Service Kit
SUBA15 Glasses Gloves
150mm Nozzle
15RM00040
*10 x Brass
Brushes
15RM00020
Window
Squeegee
15RM00008

www.matrixcleaningsystems.co.uk
MATRIX CLEANING SYSTEMS LTD, Unit H, Leyland Business Park, Centurion Way,
Farington, Leyland, PR25 3GR, UK Tel: [phone] Fax: [phone] Page 2 of 2
PREPARE YOUR MACHINE
1. Connect handle to
the back of the machine
using the 4 wing nuts
provided.
2. Leave the top wing
nuts loose for the
basket to be mounted.
3. Mount the basket
and tighten wing nuts
fully.
Switching on the machine
10. The heater on LED
will illuminate.
11. In Approx. 5 mins
the steam ready LED
will illuminate. The
machine is now ready
to be used.
12. The red trigger will
release steam when
pressed. The button will
lock the steam trigger in
the o󰀨 position.
14. A󰀩x your desired
accessory for your
cleaning task and
ensure it is locked into
position.
15. Rell Cold water
when the rell cold
water light illuminates
and a intermitant
beeping noise can also
be heard.
During use
4. Using clean cold
water ll the reservoir
and replace cap.
5. Connect vacuum
hose, clicking it into
position.Ensure it
cannot be pulled out.
6. Lift the ap and
connect the hose
ensuring the pin locks
into position.
7. Push your machine
to a suitable area and
lock the brake lever
to avoid the machine
moving during use.
8. Plug your machine
into a suitable power
supply.
9. Turn ON the
machine with the on/o󰀨
switch.
13. The left hand
switch will activate the
vacuum and the right
hand momentary switch
is inactive on this model.
16. If the vacuum
stops suctioning, switch
o󰀨 the machine and
empty the collection
tank.
•
•
Steam trigger
Locking button