Matrox DualHead2Go Original operating instructions

DualHead2Go How to Connect Guide — Easy Steps for Quick Installation
4a
4b
3b
3a
2
1
For Mac NotebooksFor Mac Notebooks
3b
3a
2
Thunderbolt™or Mini DP
1
4a
The D2G-DP-IF SKU has the same specifications as the
D2G-DP-MIF SKU, but does not include the Mini-DisplayPort
to DisplayPort adapter (P/N: CAB-MDP-DP) which needs
to be purchased separately.
4a
4b
3b
3a
2
1
3b
3a
2
The Mini DisplayPort to DisplayPort adapter
(P/N: CAB-MDP-DP) is sold separately.
TheMini DisplayPort toDisplayPortadapter
For PC Notebooks
Mini DP
1
4b
4a
For Mac NotebooksFor Mac Notebooks
Thunderbolt™or Mini DP
3b
3a
2
4b
4a
1
Matrox DualHead2Go Analog Edition Matrox DualHead2Go Digital Edition
Matrox DualHead2Go Digital SE Matrox DualHead2Go Digital ME
Matrox DualHead2Go DP Edition
Step 1 – Turn off your computer.
Step 2 – Connect the USB cable into
the DualHead2Go and then into the
USB port of your computer.
Step 3 – Attach the Matrox monitor
cable first into the graphics connector
on your computer and then into the
DualHead2Go.
Step 4 – Connect the first monitor
cable to your monitor and then to
your DualHead2Go. Repeat this step
depending on number of monitors
connected.
For detailed instructions, visit the
Matrox user guides page:
www.matrox.com/graphics/en/support/manuals/

How to Connect Guide — Easy Steps for Quick Installation
4a
4b
3b
5b
5a
3a
2
n
|
a
1
4a
4b
3b
3a
2
1
4a
4b
3b
3a
2
1
For Mac NotebooksFor Mac Notebooks
4a
4b
3b
3a
2
1
For Mac NotebooksFor Mac Notebooks
The T2G-DP-IF SKU has the same specifications as the
T2G-DP-MIF SKU, but does not include the Mini-DisplayPort
to DisplayPort adapter (P/N: CAB-MDP-DP) which needs
to be purchased separately.
Thunderbolt™or Mini DP
Matrox TripleHead2Go Analog Edition Matrox TripleHead2Go Digital Edition
Matrox TripleHead2Go Digital SE
Matrox TripleHead2Go DP Edition
Step 1 – Turn off your computer.
Step 2 – Connect the USB cable into
the TripleHead2Go and then into the
USB port of your computer.
Step 3 – Attach the Matrox monitor
cable first into the graphics connector
on your computer and then into the
TripleHead2Go.
Step 4 – Connect the first monitor
cable to your monitor and then to
your TripleHead2Go. Repeat this step
depending on number of monitors
connected.
Step 5 – For TripleHead2Go Analog
Edition only. Connect the external
power supply. First attach to your
GXM, then to an electrical outlet.
For detailed instructions, visit the
Matrox user guides page:
www.matrox.com/graphics/en/support/manuals/