Matt Blatt MBLIBTPEWLA User manual

PERTH WALL LAMP
MBLIBTPEWLA

SAFETY & WARNINGS
Ensure power is completely switched off before installing. Assemble as per the
instructions below, and only connect to power when complete.
Notes:
1. Read this user guide carefully before installing the lamp.
2. To protect the lamp and prevent damage or scratches, ensure a soft blanket
is laid down. We recommend wearing gloves when assembling the lamp.
3. If the power cord is damaged, cease use immediately. Contact
help.kogan.com for support.
SPECIFICATIONS
Power Supply 220V-240V ~50Hz
Base E27 (Edison screw, 27mm)
Wattage Max. 40W
COMPONENTS
ALamp (x1)
BBracket (x1) CScrew (x4)

INSTALLATION
Step 1: Step 2:
Step 3: Step 4:
Notes:
•A qualified electrician is required to install this lamp. Do not attempt to
install the lamp yourself.
•The bulb is not included.

Step 5:

NOTES

NEED MORE INFORMATION?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.mattblatt.com.au