Matter.Made Affordances User manual

108” Single Credenza
Installation Guide
Included for installation:
1 × HS1 credenza 108” wide
4 × wooden rails
Wall anchors not included
1 × hex key
4 × metal doors
8 × washers
8 × no.8 screws
8 × hex drive 1/4-20 screws
[phone] mattermade.us [e-mail]
Aordances
Installation Guide
Included for installation:
1 × marble top
4 × 1/4-20 socket head screws 4 × push on caps
1 × metal plate 2 × marble legs
1 × hex key
[phone] mattermade.us [email protected]

108” Single Credenza
Installation Guide
Included for installation:
1 × HS1 credenza 108” wide
4 × wooden rails
Wall anchors not included
1 × hex key
4 × metal doors
8 × washers
8 × no.8 screws
8 × hex drive 1/4-20 screws
[phone] mattermade.us [e-mail]
Aordances
Installation Guide
[phone] mattermade.us [email protected]
Installing your Affordances may require
two or more people. Be sure to use the
utmost care when handling marble
parts as they are naturally fragile and
susceptible to damage.
Find the marble leg with the two holes
located on the feet. Place this leg with
the feet facing upwards and its base on
the floor. Hold the first leg in place while
positioning the second leg to intersect
with its feet touching the ground.
Align the metal plate with the slots over
the holes in the legs.
Using the hex key provided, tighten the
1/4-20 socket head screws to secure the
metal plate to the legs. Cover the heads
of the screws with the push on caps.
Carefully place the marble top onto
the metal plate with the drilled holes
registering with the screws.
* When moving your Affordances Table,
please disassemble, move pieces to the
new location and rebuild.
1.
2.
3.
4.
Step 1
Steps 2-3
Step 4