Maverick GALAXY User manual

GALAXY TENT
INSTRUCTION
BOOKLET
A GUIDE

Tent Kit contents..................................3
TABLEof
CONTENTS
Assembly Instructions......................4
Disassembly Instructions...............7
Additional Information......................8
2

Kit contents:
GALAXT TENT
Tent bag
Galaxy tent
Stake bag
Base stakes (small)
Guy line stakes (large)
Guy line bundles
Tent strut and wall frame bag
Main tent strut
Wall frame supports
3

Instructions
ASSEMBLY
Find a location suited to the size
of the tent (preferably on level
ground)
Remove the tent from the tent
bag and unbuckle the straps
Spread the tent out as
symmetrically as possible and
locate the door
Rotate the tent so the foor faces
the desired location
THIS IS A LARGE TENT - On level
ground, the assembly can be done
by yourself, but having more people
to assist you will make things easier
1.
2.
3.
4.
5. Locate the straps around the
base of the tent
6. Firmly insert the small stakes
from the stake bag through the
straps and into the ground
4

11. Assemble the wall frame supports and place them into
the corresponding sleeves around the walls INSIDE the tent
12. Back OUTSIDE the tent, unbundle the guy lines
13. Locate the straps for the guy lines and loop the guy lines
through them (they follow the seams of the tent)
5
7. Take the main tent strut,
extend it, drop the poles into
place
8. Open the main door and
find the center of the tent,
inside the center of the
sunshade
9. Now raise the roof - strut
end with loops will go up
10. The main strut will hold
itself in the upright position,
without support, when on
relatively level ground
ASSEMBLY
Continued

14. Place the guy line stakes an appropriate distance away
from the tent - the stakes and guy lines will be difficult to
see at night, so keep them a consistent and predictable
distance away from the tent!
FINAL STEPS:
15. Loop the guy lines around the head of the stakes and
cinch them tight to fully erect the tent - guy lines need to
be consistently tight around the tent in order for the tent
to sit symmetrically
6
Your tent is now set up and
ready for your glamping
adventure!

Remove guy lines - bundle if dry.
Remove and stow guy line stakes.
Remove the wall frame supports - collapse and stow.
Note the location of the door.
Grab the main strut in the middle and move out through
the door - collapse and stow.
Remove and stow the base stakes.
Select 2 opposite sides of the tent and make 2 folds per
side, so the body of the tent is in a rectangle no longer
than 4 ft wide.
Once folded, begin rolling from one side and compress
the tent to remove excess air.
Use the tent bundling straps to cinch the tent and
compress, in order to stow in the tent bag.
1.
2.
3.
4.
5.
6.
7.
8.
9.
-The disassembly is the reverse order of the assembly-
DISASSEMBLY AND STOWING
PRO TIP:
THE TENT NEEDS TO BE
COMPLETELY DRY BEFORE
BEING STOWED FOR
MORE THAN 2 DAYS!
7
Instructions

You should know
ADDITIONAL
INFORMATION
WE TAKE PRIDE IN OUR TENTS. If you have any
issues, complaints, or ideas for improvements,
please let us know!
3. It is heavy because its built to last, but
this requires proper care and
maintenance. A clean, dry tent is a
happy tent!
2. DO NOT STOW THE TENT WHEN IT IS
WET! If the tent is even damp after your
camping/glamping/festival adventure,
you MUST let it dry out as soon as
possible to prevent damage to the tent.
1. The interior of the tent will very slightly
leak the first time it gets wet - like morning
dew. This is completely normal and should
be expected. Once it dries out, the canvas
material will shrink and become fully
waterproof. Please do not panic when this
happens.
8