12 13
Whip Use
•Insert the whip utensil in the motor unit and tighten the
utensil lock nut.
• Connect the motor unit to the power plug.
• For mod. 330015, turn the speed adjustment knob to a
number between 1 and 10.
• For model 330015, turn the speed adjustment knob.
• Firmly hold the mixer lock nut with one hand and the motor
unit handle with the other.
• Insert the whip in the container with the product to be
processed.
• Press the on button being careful not to near hands or
any other part of the body to the area where the whips are
located.
• Rotate the speed adjustment knob to select the best
rotation speed for the process.
• When finished, release the on button to stop the utensil and
remove the whip utensil from the container.
Recommendations for Use
•Use the mixer utensil in containers,
making sure to rest the protective blade
hood on the bottom so that processing
product never exceeds the maximum
level notch on the utensil (2/3 of the
accessory).
•Use the whip tool in containers, making
sure never to rest the two whips on the
bottom and so that the gear box is always
out of the processing product.
INFORMATION: Be very careful never to submerge the whip utensil gear
box in processing product to avoid damaging the gear unit inside.
330015
End of the Day Cleaning
• Unplug the motor unit from the power socket.
• Remove utensils from the motor unit.1
• Remove the whips from the whip utensil and wash them under running water (only when the utensil
is removed from the motor unit).2
• Wash the mixer utensil under running water (only when the utensil is removed from the motor unit).
• Hang the utensils with the mixer ends (mixer blade or whips) facing down. 4
• Clean external motor unit parts with a damp sponge and dry (only perform this operation when
unplugged from the power socket).
• Do not use metallic pads and abrasive detergents.
• Accurately clean using neutral products.
Problems, Causes, Solutions
•In the event of breakdown or malfunctioning, turn o the wall fuse and contact your Dealer’s service
centre.
•Avoid dismantling internal machine parts.
Problem Cause Solution
The machine
does not start
Main swich o Trun on main swich to "I"
No power reaches the motor unit Contact your dealer's service centre
Extended Periods of Disuse
• For extended periods of disuse, unplug the utensil from the power socket, clean the utensil and cover
it with a cloth to protect if from dust.
1 2 3 4
