MAXFREE S1 User manual

1. Please ensure type-c data wire is connected well with device interface.
2. This product supports whole function of type-c (charging and video),
integrated one line. If screen cannot be powered on or restarted,
please supply external power of 5V, 2A.
3. The HDMI interface used to connect the product must use the custom
HDMI TO TYPE-C data cable included in the product packaging and be
externally powered.
S1 USER'S GUIDE
Pay attention to the switching sequence of the screen

Contents Of Instruction
Product Attributes
Installation and Storage
1. Opening Mode
2. Outrigger Stretch
3. Using the Kickstand
4. Connect S1 with Laptop
5. Connect S1 with Mobile Phone and Other Devices
Audio Settings
1. Change Sound Settings of Windows 10 / Windows 11
2. Change Sound Settings of MAC OS PC
Display Mode
1. Windows 10 / Windows 11 Display Settings and Configuration
2. MacOS 13 Ventura Display Settings and Configuration
OSD Settings
2
2
2
3
4
6
7
8
9
6. Disassemble the S1 5
1. Button Operation Guide
2. Transportation, Storage and Use Requirements
10
11
1
Question& Answer 11

Product Attributes
S1 TYPE-A to TYPE-C TYPE-C to TYPE-C HDMI to TYPE-C
Accessories
S1
Specifications
353x207x23mm
Weight: Contrast:
Screen Size:
Panel Type:
Average Brightness:
Type-c Input:
Type-c Output:
Port:
1.06 Kg
16:9
72%
60hz
1920x1080 P
Screen Scale:
Color Fields:
Size:
Refresh Rate:
Resolution:
Speaker:
14 Inches
IPS Wide Viewing Angle
5V-20V / 5A Max
5V-20V / 4.25A Max
Type-cx2 HDMIx11
1
1000:1
300CD/M2
BAG
POWER
TYPE-C
TYPE-C
HDMI
Speaker
Kickstand
Carefully check package contents, if anything is missing or damaged, please contact
Maxfree customer service for support: [e-mail]

Installation and Storage
1. Opening Mode
2. Outrigger Stretch
3. Using the Kickstand
*Note: sequence of open and close must be performed to avoid damage of device
2
Support bracket
TIGHT
TIGHT
LOOSE
Crack open
Step 1: Loosen the Top Stop Buckle
Step 2: Pull out the stand to a suitable size and adjust the S1 to a suitable size
Adjust the support bracket on the back of the product to the desired length

4. Connect S1 with Laptop
3
Connect S1 to your laptop and check that your laptop has a Type-C, Type-A or HDMI port that can
provide 5V/2A power.
Connect S1 to your laptop through S1 Type-C and HDMI port, following the options below:
Option 2: If your laptop has Type-C ports (full function ports), and your laptop Type-C outlet cannot
provide more than 5V/2A power supply or the display has no signal/the signal is unstable after
connection, then you need to connect an external 5V/2A adapter to power S1. Then connect the S1
to the laptop with one Type-C cables.
Connect to S1 through the Type-C interface of the notebook
Option 1: If your laptop has Type-C ports (full function ports), and the Type-C output port of the
laptop can provide more than 5V/2A power supply, directly connect the S1 and the laptop with one
Type-C cables.

5. Connect S1 with Mobile Phone and Other Devices
4
Mobile phone connection mode
(External power needed)
Switch connection mode
(External Type-c power)
To connect the S1 screen to your laptop via the HDMI interface, follow these steps:
Option 3: If there is only one HDMI port on yourlaptop, you can use an HDMI TO Type-C cable to
connect the S1 screen to the HDMI port of your laptop. Then use a USB-A TO Type-C cable to
provide power to the S1 screen.

6. Disassemble the S1
Note: sequence of open and close must be performed to avoid damage of device.
5
Fold the top stop buckle
When folding the screen, the bracket must be pulled out to an appropriate size as shown in the
picture, and the screen must be fixed in the silicone of the bracket, otherwise forcibly closing it
will damage the screen!

Audio Settings
6
S1
1. Change Sound Settings of Windows 10 / Windows 11
1.1 Right click the loudspeaker icon down-right
1.2 Select "switch on sound " in pop-up dialog box
1.3 Left click "turn on sound settings" and pop-up the box as provided,Here users can set about sound;
Here users can set about sound
1. Master volume;
2. Select output device: ( S1-R / Speaker );
3. Device attributes.
Sound
Sound
output
System
Some apps can be set to use a different sound device than the one selected here.
Please customize the app volume and device in advanced sound selection.
Select output device
Device attribues
master volume

？
Audio Settings
7
2. Change Sound Settings of MAC OS PC
2.1. Choose Apple menu > System Settings
2.2. Click "Output", then select the device you wantto use in the list of sound
output devices：( S1 / Speaker )

8
Display Mode
1.2 Under the "Rearrange displays" section, drag and drop each display to rearrange them according to their
physical layout on your desktop. Scroll down to the bottom of the page to further configure the display for
extended or mirrored mode.
1.1 Right-click a blank area of the desktop. Select 'Display Settings' from the pop-up dialogue box.
Left-click "Display Settings" to open the settings dialogue box, as shown.
Night light can help you get to sleep
Select a display below tochange thesettings for it. Press and hold (or select) a display,
then drag torearrange it.
1. Windows 10 / Windows 11 Display Settings