MAXHUB UC M30 User manual

QUICK START GUIDE
UC M30
4K UHD 180°Panoramic Cam:
The UC M30 is aprofessional 180°Panoramic Camera.It includes 3single Cameras with 12MP,USB
Type-A and Type-C connections,and includes a1,5m USB cable plus awallmount adapter.
It offers some very unique features,like 180°panoramic view,Tracking-Mode,Picture stiching &
composing,and up to 11 different Display Layouts (Display-Modes).The Low Lux algorithm is another
outstanding feature which guarantees acrispand clear picture under every light or dark condition.The
two integrated Microphones provide apick up distanceof up to 4m. The clamp on the unit allows for
easy mounting on alot of Displays, and it also contains ascrew connection to put it on astandard
camera tripod.
There are actually twoways to use and setup the UC M30 Camera:
Without the software:PART 1
Simply use the push botton on top of the UC M30 and select one of the 5available Display-Modes.
Using the software:PART 2
Download PanoCam Studio software,select one out of 6available Display-Modes, and adjust the
picture layout,tracking mode and other things to your own favour.
Introduction
UC M30

When you unpack the UC M30,please take the USB cable
included in the box and connect it to your PC or Laptop,
using the Type-C connection on the rear side of the unit.
Place it either on top of your display using the clamp
attached to the Camera or use the wallmount adapter to
place the UC M30 underneath alarge display.Please make
sure to position the Camera not much higher or lower
than the „eyes“of the people sitting in the room.So if your
Display is rather small and stands on the table,you can
place it on top of it,if you use alarge format Display, or
LED Display mounted on the wall, MAXHUB recommends
to place the unit under the Display. You can either use the
included wallmount adapter,or aregular Camera tripod.
MAXHUB offers avery nice Camera tripod,called the
WIB01,simply ask your local sales to get pricing and
specifications.
Using the push button on top of the UC M30,will allow
you to switch between the 5Display-Modes:
Usagewithout Software
PART 1
UC M30 rear panel view with the 2x USB connections
MAXHUB WIB01 tripod
The 5Display-Modes via push button
selection:
Mode 1180°Panoramic View
Mode 2 4x Window Tiles
Mode 390°HFoV
Mode 4180°+45°HFoV
Mode 5180°+ 3 Window Tiles

When you unpack the UC M30,please take the USB cable
included in the box and connect it to your PC or Laptop,
using the Type-Connection on the rear side of the unit.
Place it either on top of your display using the clamp
attached to the Camera or use the wallmount adapter to
place the UC M30 underneath alarge display.Please make
sure to position the Camera not much higher or lower
than the „eyes“of the people sitting in the room.So if your
Display is rather small and stands on the table,you can
place it on top of it,if you use alarge format Display, or
LED Display mounted on the wall, MAXHUB recommends
to place the unit under the Display.Here you can either
use the included wall mount adapter,or acamera tripod.
MAXHUB offers avery nice Camera tripod,called the
WIB01,simply ask your local sales to get pricing and
specifications.
Software installation:
After you connected the UC M30 to your Computer, aCD-
Rom icon will appear on your desktop,which will allow you
to install the PanoCam Studio software.If not, please
follow this link:
https://studio.cupola360.com/cvte/
After installing the software,please check if you have the
latest firmware,under the same link as above.When the
SW is installed and you open it,it will automatically search
for aconnected UC M30.
If not, please click „try again“.
Usage with PanoCam Studio Software
PART 2

After you click on one of the 6available Display-Modes, you can start to manually select the people in the
room or sections of the room,by drawing a „frame“onto the picture layout by clicking and holding the
left mouse button.
Simply adjust the size of the
frame and after right clicking
on your mouse,you can select
„Auto-Tracking“, which will set
the frame into adifferent color
and the Camera will follow the
Person, who starts moving within
the frame.
„Pin“ will allow you to fix the
Frame to its current position and
„Delete“ will cancel the frame
selection.
„Auto-Detect“will be turned on by default when you open
PanoCam Studio software,but if more sensitive tracking
is needed,please turn on Auto-Tracking!
If you want to have your display mirror-inverted,please turn
on „Image mirror“.
!Note:The settings you will make for acertain Display-Mode will NOT be copied,and therefor will NOT
appear in the next Display-Mode you select!
!Note:To use the above mentioned functionalities,you need to keepthe PanoCam Studio Software
running in the background while you use your VC application!
!Note:If the PanoCam Studio software is closed,all settings will be lost, there is currently no way to save
your settings!
Usage with PanoCam Studio Software

Here you will find the description of the
6 Display-Modes,when using the PanoCam Studio software:
Usage with PanoCam Studio Software

APPLICATIONS / FEATURES
Meeting / Huddle Rooms
The UC M30 is the perfect choice for every Meeting Room application, where you need to get a
lot of people into the picture and where you can benefit from a180°FoV.Enlarge the space
you want to meet and don’t leave outanybody.
Standard 110°FoV Extended180°FoV
When the layout of your Huddle Room asks for a180°panoramic Camera, the UC M30 is areal
good choice.Even if the outer seats are very close to the Display, the 180°FoV will greatly deal
with this situation.
Standard 110°FoV Extended180°FoV

APPLICATIONS / FEATURES
Meeting / Huddle Rooms
Auto-Track every changing situation in the Meeting Room.If more people are joining, the UC
M30 will automatically detect them, or if people leaving the room, the picture will be reduced
to only show the attending persons.
Adding Audio to your Meeting applications was never easier than today! Select the MAXHUB
BM21 or BM20 Speakerphone,and either connect to the UC M30 via the USB cable (BM20)
or choose the BM21 including theBT Dongle, to connect wirelessly via Bluetooth to the UC
M30.“No more cable on the table”
Seamlessly working with your favorate Conference App...
UC M30‘s second USB connection
to attach BM20 Speakerphone
BM20 Speakerphone wit USB Cable, or
BM21 Speakerphone with BT connection
BM20
BM21